Complete your Ruger® Mini-14® , Mini Thirty® or Ruger® AC-556 with this precision machined direct optic mount solution from Samson. IMPORTANT: The Hannibal Rail is currently offered for 2008 and later Mini-14® or Mini Thirty®, or 2007 and earlier Mini-14® (in both black and natural gray). NOTE - It also fits on the Ruger AC-556. Refer to the Ruger® serial number lookup on their website if you are unsure what year your rifle was manufactured. It is very important that the correct combination of Hannibal Rail and barrel type is used. If during installation there are any fitment concerns, immediately stop and contact Samson Mfg. customer service. Choose 2008 and Later Mini-14® or Mini Thirty® (Black or Natural Gray) if your rifle has a factory flange barrel and a series number beginning with 580 and higher. Choose 2007 and Earlier Mini-14® ONLY (Black or Natural Gray) if your rifle has a factory straight pencil barrel and a series number beginning with 181 and higher, but not including 580 and higher. Directly mount a micro red dot forward of the action without the need for a Picatinny rail clamp adapter. The integrated Picatinny rail on top of the Hannibal Rail is perfect for mounting any accessory your heart desires, and gives your rifle a more tactical look. The included 2" Picatinny rail and QD swivel mount can be attached to the side of the Hannibal Rail for even more accessory mounting options. The Hannibal Rail accepts red dot optics compatible with the following footprints: Trijicon RMR® Leupold DeltaPoint® Pro Vortex VENOM® C-MORE NOTE: With the large number of micro red dots currently available on the market, along with any that may come out in the near future, it is impossible to guarantee that every single one will be compatible with the Hannibal Rail. Whether it’s minor changes in the optic footprint, or differences in the optic mounting screw thread pitch, Samson Mfg. customer service will do everything they can to answer any compatibility questions you may be having. INCLUDES Hannibal rail Barrel clamp 2” Picatinny rail section QD swivel mount Blue thread locker SCREWS: 4X 10-32 x 3/8 low head screw (2X 2” picatinny rail section, 2X QD swivel mount) 4X 6-32 x 3/8 socket head screw (2X barrel clamp, 2X micro red dot optional) 2X MR1 pins (Trijicon RMR®, Leupold DeltaPoint® Pro) 2X MR2 pins (C-MORE, Vortex VENOM®) Hex Wrenches: 9/64” 7/64” 3/32” 1/16” FEATURES Compatible with Samson Mfg’s A-TM Folding Stock (see IMPORTANT information above for Mini-14® and Mini Thirty® compatibility) Replaces factory plastic handguard Mounts directly to barrel, allowing the use of most aftermarket Mini-14® stocks Allows mounting of micro red dot Specifications: Material: 6061-T6 Aluminum Finish: Type III, class 2 anodized finish Length: 9.9” Width: 1.5” Height: 0.7” Weight: 5.6 oz. NOTE: OPTIC NOT INCLUDED
Fullfør din Ruger® Mini-14®, Mini Thirty® eller Ruger® AC-556 med denne presisjonsmaskinerte direkte optikkmonteringsløsningen fra Samson. VIKTIG: Hannibal Rail tilbys for Mini-14® eller Mini Thirty® fra 2008 og senere, eller Mini-14® fra 2007 og tidligere (i både svart og naturlig grå). MERK - Den passer også på Ruger AC-556. Sjekk Ruger® serienummeroppslaget på deres nettsted hvis du er usikker på hvilket år riflen din ble produsert. Det er veldig viktig at den riktige kombinasjonen av Hannibal Rail og løpetype brukes. Hvis det under installasjonen oppstår bekymringer angående passform, stopp umiddelbart og kontakt Samson Mfg. kundeservice. Velg 2008 og senere Mini-14® eller Mini Thirty® (svart eller naturlig grå) hvis riflen din har et fabrikkflensløp og et serienummer som begynner med 580 eller høyere. Velg 2007 og tidligere Mini-14® KUN (svart eller naturlig grå) hvis riflen din har et fabrikkrett pencil-løp og et serienummer som begynner med 181 og høyere, men ikke inkludert 580 og høyere. Monter en mikro rød prikk direkte foran aksjonen uten behov for en Picatinny rail clamp adapter. Den integrerte Picatinny railen på toppen av Hannibal Rail er perfekt for å montere ethvert tilbehør du ønsker, og gir riflen din et mer taktisk utseende. Den medfølgende 2" Picatinny railen og QD swivel mount kan festes på siden av Hannibal Rail for enda flere monteringsalternativer for tilbehør. Hannibal Rail aksepterer rød prikk-optikk kompatible med følgende fotavtrykk: Trijicon RMR® Leupold DeltaPoint® Pro Vortex VENOM® C-MORE MERK: Med det store antallet mikro rød prikker som for tiden er tilgjengelige på markedet, sammen med eventuelle som kan komme ut i nær fremtid, er det umulig å garantere at hver enkelt vil være kompatibel med Hannibal Rail. Enten det er mindre endringer i optikkens fotavtrykk, eller forskjeller i skruetråden for optikkmontering, vil Samson Mfg. kundeservice gjøre alt de kan for å svare på eventuelle kompatibilitetsspørsmål du måtte ha. INKLUDERER Hannibal rail Løpeklips 2” Picatinny rail-seksjon QD swivel mount Blå skruelås SKRUER: 4X 10-32 x 3/8 lav hodeskrue (2X 2” picatinny rail-seksjon, 2X QD swivel mount) 4X 6-32 x 3/8 sekskant hodeskrue (2X løpeklips, 2X mikro rød prikk valgfrie) 2X MR1-pinner (Trijicon RMR®, Leupold DeltaPoint® Pro) 2X MR2-pinner (C-MORE, Vortex VENOM®) Hex-nøkler: 9/64” 7/64” 3/32” 1/16” FUNKSJONER Kompatibel med Samson Mfg’s A-TM Folding Stock (se VIKTIG informasjon ovenfor for Mini-14® og Mini Thirty® kompatibilitet) Erstatter fabrikkens plast håndbeskyttelse Monteres direkte på løpet, slik at de fleste ettermarkeds Mini-14® stokkene kan brukes Tillater montering av mikro rød prikk Spesifikasjoner: Materiale: 6061-T6 Aluminium Overflatebehandling: Type III, klasse 2 anodisert finish Lengde: 9.9” Bredde: 1.5” Høyde: 0.7” Vekt: 5.6 oz. MERK: OPTIKK IKKE INKLUDERT