The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Mer...
Lee Taper Crimp Die er laget av herdet stål designet for å overvinne krympeproblemer forårsaket av dårlig die-design. Jakketerte kuler må ha en krympefordypning.
Mer...
Kundevurderinger for LEE PRECISION LEE TAPER CRIMP DIE, 9MM
Antall vurderinger: 1
Fra brownells.com: 1
Gjennomsnittsvurdering: 5
Works well at about half the price(11.04.2014)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!
Produktnr.: 100053279 LEE PRECISION LEE TAPER CRIMP DIE, 9MM Produsentnr.: 90780734307907808 Lee Taper Crimp Die er laget av herdet stål designet for å overvinne krympeproblemer forårsaket av dårlig die-design. Jakketerte kuler må ha en krympefordypning.
269NOK0kr 269,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Spesifikasjoner:Die Style: Taper Crimp DiesKaliber: 9 mm Luger
Cartridge:
9 mm Luger
Die Style:
Taper Crimp Dies
Leveringsvekt: 0,091kgFrakthøyde: 10mmFraktbredde: 30mmFraktlengde: 106mm
UPC
: 734307907808
Elementdetaljer
Made in USA
Produktnr.: 100053274 LEE PRECISION LEE TAPER CRIMP DIE, 38 SPECIAL Produsentnr.: 90781734307907815 Lee Taper Crimp Die er laget av herdet stål designet for å overvinne krympeproblemer forårsaket av dårlig die-design. Jakketerte kuler må ha en krympefordypning.
299NOK1kr 299,00
*
Leveringstid ca. 14-21 dager. 1 stk. på lageret i USA
Produktnr.: 100053275 LEE PRECISION LEE TAPER CRIMP DIE, 40 S&W/ 10MM Produsentnr.: 90782734307907822 Lee Taper Crimp Die er laget av herdet stål designet for å overvinne krympeproblemer forårsaket av dårlig die-design. Jakketerte kuler må ha en krympefordypning.
299NOK1kr 299,00
*
Leveringstid ca. 14-21 dager. 1 stk. på lageret i USA
Spesifikasjoner:Die Style: Taper Crimp DiesKaliber: 10 mm Auto, 40 S&W
Produktnr.: 100053278 LEE PRECISION LEE TAPER CRIMP DIE, 45 ACP Produsentnr.: 90785734307907853 Lee Taper Crimp Die er laget av herdet stål designet for å overvinne krympeproblemer forårsaket av dårlig die-design. Jakketerte kuler må ha en krympefordypning.
289NOK2kr 289,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Spesifikasjoner:Die Style: Taper Crimp DiesKaliber: 45 Auto (ACP)
The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Mer...
Lee Taper Crimp Die er laget av herdet stål designet for å overvinne krympeproblemer forårsaket av dårlig die-design. Jakketerte kuler må ha en krympefordypning.
Mer...
Kundevurderinger for LEE PRECISION LEE TAPER CRIMP DIE, 9MM
Antall vurderinger: 1
Fra brownells.com: 1
Gjennomsnittsvurdering: 5
Works well at about half the price(11.04.2014)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!