Vertical Forend Grip With Built-In Quick-Deploy Bipod
Dual-function vertical grip locks to the bottom accessory rail of your tactical rifle’s forend to give you enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation, the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on brush, vehicle interior, or other gear when retracted. Legs and grip are made of tough, injection-molded polymer; steel cross-bolt with easy-grip thumbscrew locks directly to any MIL-STD 1913 Picatinny rail to ensure a rock-solid fit. GPS-02 has steel inserts in legs for maximum strength in high-stress tactical operations.
SPECS: Reinforced polymer, Black. 6¼" (15.9cm) long with legs retracted. 8½" (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. GPS-02 – Steel inserts in legs. 7.8 oz. (220g) weight.
Mer...
Vertikalt forskjeftegrep med innebygd hurtigutløsende tofot
Dobbel-funksjon vertikalt grep låser seg til den nederste tilbehørsskinnen på taktisk rifles forskjefte for å gi deg forbedret kontroll under CQB og en stabil tofotstøtte for presis skyting på lang avstand. Grepet har konturer som fyller hånden og dype riller som gir et solid grep selv når hendene dine er våte. Trykk på den store, dypt riflete utløserknappen, og en kraftig fjær utløser bena umiddelbart. Knappen er beleilig plassert for aktivering med tommelen og sitter i flukt med den omkringliggende overflaten for å forhindre utilsiktet utløsning. Utstrakte ben gir tilstrekkelig høyde for at et standard 30-runds magasin skal klare seg over bakken, og vil ikke hekte seg fast i busker, kjøretøyinteriør eller annet utstyr når de er trukket inn. Ben og grep er laget av tøff, sprøytestøpt polymer; stålkryssbolt med lettgrep tommelskrue låses direkte til hvilken som helst MIL-STD 1913 Picatinny-skinne for å sikre en steinhard passform. GPS-02 har stålforsterkninger i bena for maksimal styrke under høy-stress taktiske operasjoner.
SPECS: Forsterket polymer, Svart. 6¼" (15.9cm) lang med inntrukne ben. 8½" (21.6cm) høy med utstrakte ben. 13⁄8" (3.5cm) diameter. GPS-02 – Stålforsterkninger i bena. 7.8 oz. (220g) vekt.
Mer...
Kundevurderinger for G.P.S. MILITARY MODEL GRIP POD PICATINNY MOUNT 7-9" BLACK
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 4,8
GPS-02 works!(14.08.2009)
This is one handy piece of gear!
GPS-02 Grip Pod(22.09.2009)
The Grip Pod made handling my AR15 easy and the legs make a great platform for prone shooting. I am very satisfied with this product.
Versatility is welcome(19.11.2009)
It's great to have both a vertical foregrip and a bipod all in one. I use the foregrip all the time, and every once in a while need a bipod. It's great that I can make a quick decision, press a button, and suddenly I've got a bipod. I really appreciate that aspect.
One thing I don't like is the thickness of the grip at the attachment point. It's thick and blocky and has to be to manage the bipod deployment button and mechanisms. But sometimes you go to grip it and your hand grabs right under your rail (it's an index point)... which is right on the blocky part at the top. It's not very comfortable and you end up readjusting your grip. It's a minor point, but it is still one thing about the grip that annoys me.
Marine combat tested(30.08.2010)
This was issued to me in 2007 for use in Iraq with my M4. It is very tough and durable. I also liked the fact that the sides have a small flat surface which I used to mount the pressure switch to my tac-light. I have been trying to find a place to purchase one and never thought to look here! This grip is so much better than the other bipod grips out there.
Jack of all trades(20.01.2011)
The grip is a little long, and the bi pod don't pivot, but its lighter and easier to use than having both mounted separately. its strong enough for an m4, but if its on a saw don't drop it thinking the legs can take it.
GRIPOD Systems(30.03.2011)
Awesome piece of gear, works great and is extremely durable. Highly recommended it for anyone interested in purchasing any type of vert grip.
Produktnr.: 100003226 G.P.S. MILITARY MODEL GRIP POD PICATINNY MOUNT 7-9" BLACK Produsentnr.: GPS-02793573223159 Dobbel-funksjon vertikalt grep låser seg til den nederste tilbehørsskinnen på taktisk rifles forskjefte for å gi deg forbedret kontroll under CQB og en stabil tofotstøtte for presis skyting på lang avstand. Grepet har konturer som fyller hånden og dype riller som gir et solid grep selv når hendene dine er våte. Trykk på den store, dypt riflete utløserknappen, og en kraftig fjær utløser bena umiddelbart. Knappen er beleilig plassert for aktivering med tommelen og sitter i flukt med den omkringliggende overflaten for å forhindre utilsiktet utløsning. Utstrakte ben gir tilstrekkelig høyde for at et standard 30-runds magasin skal klare seg over bakken, og vil ikke hekte seg fast i busker, kjøretøyinteriør eller annet utstyr når de er trukket inn. Ben og grep er laget av tøff, sprøytestøpt polymer; stålkryssbolt med lettgrep tommelskrue låses direkte til hvilken som helst MIL-STD 1913 Picatinny-skinne for å sikre en steinhard passform. GPS-02 har stålforsterkninger i bena for maksimal styrke under høy-stress taktiske operasjoner.
3249NOK0kr 3 249,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Vertical Forend Grip With Built-In Quick-Deploy Bipod
Dual-function vertical grip locks to the bottom accessory rail of your tactical rifle’s forend to give you enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation, the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on brush, vehicle interior, or other gear when retracted. Legs and grip are made of tough, injection-molded polymer; steel cross-bolt with easy-grip thumbscrew locks directly to any MIL-STD 1913 Picatinny rail to ensure a rock-solid fit. GPS-02 has steel inserts in legs for maximum strength in high-stress tactical operations.
SPECS: Reinforced polymer, Black. 6¼" (15.9cm) long with legs retracted. 8½" (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. GPS-02 – Steel inserts in legs. 7.8 oz. (220g) weight.
Mer...
Vertikalt forskjeftegrep med innebygd hurtigutløsende tofot
Dobbel-funksjon vertikalt grep låser seg til den nederste tilbehørsskinnen på taktisk rifles forskjefte for å gi deg forbedret kontroll under CQB og en stabil tofotstøtte for presis skyting på lang avstand. Grepet har konturer som fyller hånden og dype riller som gir et solid grep selv når hendene dine er våte. Trykk på den store, dypt riflete utløserknappen, og en kraftig fjær utløser bena umiddelbart. Knappen er beleilig plassert for aktivering med tommelen og sitter i flukt med den omkringliggende overflaten for å forhindre utilsiktet utløsning. Utstrakte ben gir tilstrekkelig høyde for at et standard 30-runds magasin skal klare seg over bakken, og vil ikke hekte seg fast i busker, kjøretøyinteriør eller annet utstyr når de er trukket inn. Ben og grep er laget av tøff, sprøytestøpt polymer; stålkryssbolt med lettgrep tommelskrue låses direkte til hvilken som helst MIL-STD 1913 Picatinny-skinne for å sikre en steinhard passform. GPS-02 har stålforsterkninger i bena for maksimal styrke under høy-stress taktiske operasjoner.
SPECS: Forsterket polymer, Svart. 6¼" (15.9cm) lang med inntrukne ben. 8½" (21.6cm) høy med utstrakte ben. 13⁄8" (3.5cm) diameter. GPS-02 – Stålforsterkninger i bena. 7.8 oz. (220g) vekt.
Mer...
Kundevurderinger for G.P.S. MILITARY MODEL GRIP POD PICATINNY MOUNT 7-9" BLACK
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 4,8
GPS-02 works!(14.08.2009)
This is one handy piece of gear!
GPS-02 Grip Pod(22.09.2009)
The Grip Pod made handling my AR15 easy and the legs make a great platform for prone shooting. I am very satisfied with this product.
Versatility is welcome(19.11.2009)
It's great to have both a vertical foregrip and a bipod all in one. I use the foregrip all the time, and every once in a while need a bipod. It's great that I can make a quick decision, press a button, and suddenly I've got a bipod. I really appreciate that aspect.
One thing I don't like is the thickness of the grip at the attachment point. It's thick and blocky and has to be to manage the bipod deployment button and mechanisms. But sometimes you go to grip it and your hand grabs right under your rail (it's an index point)... which is right on the blocky part at the top. It's not very comfortable and you end up readjusting your grip. It's a minor point, but it is still one thing about the grip that annoys me.
Marine combat tested(30.08.2010)
This was issued to me in 2007 for use in Iraq with my M4. It is very tough and durable. I also liked the fact that the sides have a small flat surface which I used to mount the pressure switch to my tac-light. I have been trying to find a place to purchase one and never thought to look here! This grip is so much better than the other bipod grips out there.
Jack of all trades(20.01.2011)
The grip is a little long, and the bi pod don't pivot, but its lighter and easier to use than having both mounted separately. its strong enough for an m4, but if its on a saw don't drop it thinking the legs can take it.
GRIPOD Systems(30.03.2011)
Awesome piece of gear, works great and is extremely durable. Highly recommended it for anyone interested in purchasing any type of vert grip.