Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

ZEV TECHNOLOGIES
FULCRUM DROP-IN TRIGGER KITS FOR GLOCK®

811745021126 100016968

Precise Letoff, Fast Rest, Fully-Adjustable For Takeup & Overtravel; Drop-In Installation

Convenient kits combine easy drop-in installation with the performance benefits of a custom trigger job to give your Glock® an ultra-smooth pull, clean letoff, and short reset without impairing the reliability of the factory safeties. Fully adjustable for pre-travel and over-travel via two easy-to-access hex-head screws (wrench included), so you can tune trigger feel to your exact requirements for maximum control. Trigger shoe and trigger safety are precision machined from 6061 T6 aluminum billet for precise engagement, smooth movement, and superb responsiveness. Engagement surfaces on the stainless steel trigger bar are mirror polished for outstanding sensitivity and consistency. Basic Fulcrum trigger includes preassembled trigger shoe, safety lever, and trigger bar. Complete Trigger Kit contains the trigger, trigger bar, trigger block, ejector, connector, trigger spring, and a lightweight stainless steel firing pin safety plunger and spring to further refine the trigger pull. Comes with a reduced-power striker spring to produce a lighter-feeling trigger for competition, and the factory-weight striker spring for daily carry and duty use.

SPECS: .45 DROP IN AND ULTIMATE ONLY FIT .45 ACP. IN GEN-1 THRU GEN-3 GUNS. 10mm uses a different firing pin safety diameter that can't be used on a .45 nor can the .45 be used on the 10mm.

Mer...

Presis Utløsning, Rask Tilbakestilling, Fullt Justerbar For Forløp & Overreise; Drop-In Montering

Praktiske sett kombinerer enkel drop-in montering med ytelsesfordelene til en tilpasset avtrekkerjobb for å gi din Glock® et ultra-glatt avtrekk, klar utløsning og kort tilbakestilling uten å påvirke påliteligheten til fabrikkens sikkerhetssystemer. Fullt justerbar for forløp og overreise via to lett tilgjengelige sekskant-skruer (nøkkel inkludert), slik at du kan finjustere avtrekkerfølelsen til dine eksakte krav for maksimal kontroll. Avtrekkerskoen og avtrekkersikkerheten er presisjonsmaskinert fra 6061 T6 aluminiumsblokk for presis engasjement, jevn bevegelse og enestående respons. Engasjeringsflatene på den rustfrie stål avtrekkerstangen er speilpolert for enestående følsomhet og konsistens. Grunnleggende Fulcrum-avtrekker inkluderer forhåndsmontert avtrekkersko, sikkerhetsarm og avtrekkerstang. Komplett Trigger Kit inneholder avtrekkeren, avtrekkerstangen, avtrekkerblokken, utstøteren, kontakten, avtrekkerfjæren, og en lettvekts rustfritt stål tennstiftsikkerhetsplunger og fjær for å ytterligere forfine avtrekket. Leveres med en redusert-kraft slagfjær for å produsere en lettere avtrekkerfølelse for konkurranse, og en fabrikkvekt slagfjær for daglig bæring og tjenestebruk.

SPECS: .45 DROP IN OG ULTIMATE PASSER KUN FOR .45 ACP. I GEN-1 TIL GEN-3 VÅPEN. 10mm bruker en annen diameter på tennstiftsikkerheten som ikke kan brukes på en .45, og .45 kan heller ikke brukes på 10mm.

Mer...

Kundevurderinger for ZEV TECHNOLOGIES FULCRUM DROP-IN TRIGGER KIT GEN 1-3 GLOCK .40 CAL RED SAFETY

Antall vurderinger: 12
Fra brownells.com: 12
Gjennomsnittsvurdering: 4

Nope! (13.05.2016)

Fit well. Dry fire checked out. Very nice feel. Short travel and reset. First time fired, had double fire. Confirmed again. 40 rounds, 3 double fires. Called tech support. Was told to put Glock connector in but trigger would not be as good. Huh? I spent that much and they want me to put Glock connector in? Thought about that. Tech could not tell me, or would not tell what was transpiring. I am a certified Law Enforcement Armorer and have a type 7 FFL. Decided to call back rather than "swapping out parts". Was told would be 10 minutes to talk to someone. Done at that point. Once again, I appreciate so much service from Brownell's. Sent trigger back for refund. If Zev wants to figure out what went wrong, I am available. Interesting problem but I can not carry a gun with that trigger with my experience. Again, I thank Brownell's for service.

Best Glock Trigger Ever! (19.05.2010)

The pull is reduced below 3 lbs, the finger tip feeling is more like a 1911 and less of the Glock safety trigger bite. I did not have to adjust the the travel in either direction it just worked perfectly right out of the box. The trigger travel is less than half the stock Glock. The fit, finish and function is perfect, I highly recommend this product!

Best Trigger Available for Glocks! (25.05.2010)

Finger tip trigger feel is much smoother with the Fulcrum trigger safety. Product delivers a 3 lbs pull that has a shorter pull and faster reset. This one is a winner!

Turned my 34 into a nail gun (04.06.2010)

Didn't require any adjustment out of the packaging. Smooth trigger pull. Scary how smooth the trigger pull and rest were. Hard to improve on a Glock, by this is definitely a step in the right direction.

Save your money for ammo instead (16.10.2011)

Thought I'd try the Fulcrum in my Glock 34. The aluminum trigger feels a little nicer, but I can't say the whole setup is significantly better than the factory smooth trigger and factory minus (-) connector bar. For the money, I'm not impressed. I have compared the Fulcrum side-by-side with the smooth/minus factory setup, and I can't even say I prefer the Fulcrum. I'd rather have the [$] back and a half case of 9mm to shoot.

nice..but pricey (22.01.2012)

very easy to install. nice if you have never worked on a glock. the aluminum trigger is a work of art. a cheap 3.5 trigger bar, a 50 cent trigger job and a few springs is money better spent, unless you really need the extra adjusting ability.

A World of Difference (28.02.2013)

I ordered the complete trigger kit for my Glock 26. I was previously disgusted with all triggers on any Glock, most likely to my being spoiled by my beautiful 1911 trigger. However, I installed the fulcrum trigger (installation is a breeze, only three pins to knock out and it drops right in) and immediately I am in love with this gun. It is such a difference, the first redundant pull of the glock that does not engage anything is eliminated. Also the weight and feel are so crisp and smooth. I would recommend this product to everyone who owns a glock. Yes there are other options, but when considering installation ease as well as stellar performance I am putting one in every one of my Glocks. Buy this trigger if you've ever had Glock trigger woes, they will be instantly solved.

Glock 21 SF (28.02.2013)

I would have given this a 5 star, but the adjustment screws for pre and over travel were so tight it bent the hex key. if you are getting this for a Glock 21 SF be aware that the rear housing DOES NOT fit the 21SF model. You can buy the trigger and spring only and use the stock rear housing with this unit (as that is what I ended up doing).

I realy like the glockworx trigger over the stock because the saftey has a far smoother/evenly dispersed feel compared to the stock.

1911 trigger for a glock (08.08.2014)

I used this trigger in my Glock 17L and it is the closest thing to a 1911 trigger that i have found yet. It has a little bit more take up and the actual trigger pull is slightly longer, but every bit as light smooth as the triggers on my 1911's.

Very nice trigger, read the instructions (14.08.2014)

This is an EXCELLENT trigger if you follow the directions.

You need to apply heat to break the loc-tite on the adjustment screws about 5-10 seconds over a butane lighter will do the trick. It's an aluminum part, it won't melt like the OEM one.

It does require you to remove the trigger to adjust it though, which is my one minus. I call that 'fitting required'. It isn't hard, just time consuming if you want to get every bit of safe pre and over-travel out.

Once done, it has a shorter pull and reset than stock- shorter than even the Evo Elite connector system.

Color me impressed- the metal trigger seems less mushy too, or maybe just the harder edges feel nicer? Hard to say for sure, but it does feel better than a standard trigger fitted with an overtravel stop and polishing.

Needs to be adjusted (21.01.2015)

I'm a full time gunsmith and I recently finished installing one of these for a customer. Here's a few of my thoughts....

It's not as easy to install as they claim. My customer brought the gun to me with the trigger installed and the gun not firing. He managed to get the trigger bar bound behind the connector. Once that was resolved I tested the trigger and I was EXTREMELY disappointed. As many have said, I've felt better triggers throwing a minus connector into a factory gun. But wait there's hope.

Heat the trigger as the instructions say and then start adjusting the pre-travel and overtravel. You'll end up with a decent to nice trigger. If you want to go a step further you'll probably find the pre-travel can't be set as far back as you would like because the trigger safety doesn't clear the frame fast enough. On my customer's gun that was a tiny bit of mold flashing still on the frame. Cleaning that up allowed me to pull over .080" extra out of the pre-travel. Once everything was done, the trigger felt like it was the closest thing to a 1911 I've felt in any striker fired semi auto. My customer can't stop raving about it. I'm really stunned at how well it turned out from how horrible it was without being adjusted. Another side benefit is by adjusting the pre-travel so aggressively it also shortened the reach to the trigger substantially. If you happen to have short fingers or a short trigger finger this is the first thing that I've ever seen to allow you to get your finger on a Glock trigger well!

Note about the adjustment screws: I did not use a lighter to heat those screws. I ended up using a butane torch. You have to get that much hotter than you think you would with how much metal is insulating those screws. If I owned the company I wouldn't locktite the screws and I'd tell the installer to do it after adjustments were made. However they come with locktite, you will need heat, likely more than you think you should.

After a couple year's use I'm shopping (02.08.2016)

The Fulcrum Trigger was the first real system designed to correct the horrible gritty Glock Triggers - especially if shooting in competition. After awhile my reset wasn't working correctly. I went to ZEV's website to get tips on troubleshooting. I followed their tip to heat the trigger up to free up the Locktite so adjustments could be made. After using a heat gun then a lighter the allen wrench snapped off in the screw head. Went to ZEV after seeing several reviews having the same issue. Lousy service offered. Asked for a replacement trigger without Locktite - not available, and a rather significant charge to boot.

I'll shop another brand now.

Les 12 flere anmeldelser fra brownells.com

0 0 2 NOK

Produktnr.: 100016968
ZEV TECHNOLOGIES FULCRUM DROP-IN TRIGGER KIT GEN 1-3 GLOCK .40 CAL RED SAFETY
Produsentnr.: FULDRP40BR 811745021126 Praktiske sett kombinerer enkel drop-in montering med ytelsesfordelene til en tilpasset avtrekkerjobb for å gi din Glock® et ultra-glatt avtrekk, klar utløsning og kort tilbakestilling uten å påvirke påliteligheten til fabrikkens sikkerhetssystemer. Fullt justerbar for forløp og overreise via to lett tilgjengelige sekskant-skruer (nøkkel inkludert), slik at du kan finjustere avtrekkerfølelsen til dine eksakte krav for maksimal kontroll. Avtrekkerskoen og avtrekkersikkerheten er presisjonsmaskinert fra 6061 T6 aluminiumsblokk for presis engasjement, jevn bevegelse og enestående respons. Engasjeringsflatene på den rustfrie stål avtrekkerstangen er speilpolert for enestående følsomhet og konsistens. Grunnleggende Fulcrum-avtrekker inkluderer forhåndsmontert avtrekkersko, sikkerhetsarm og avtrekkerstang. Komplett Trigger Kit inneholder avtrekkeren, avtrekkerstangen, avtrekkerblokken, utstøteren, kontakten, avtrekkerfjæren, og en lettvekts rustfritt stål tennstiftsikkerhetsplunger og fjær for å ytterligere forfine avtrekket. Leveres med en redusert-kraft slagfjær for å produsere en lettere avtrekkerfølelse for konkurranse, og en fabrikkvekt slagfjær for daglig bæring og tjenestebruk.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Finish: Black, Red Make: Glock Modell: 22, 23, 35, 27 Style: Adjustable, Competition

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Enkel drop-in montering gir ultra-glatt avtrekk, klar utløsning og kort tilbakestilling uten å påvirke fabrikkens sikkerhetssystemer.
Fullt justerbar for forløp og overreise via to sekskant-skruer, med presisjonsmaskinert avtrekkersko og avtrekkersikkerhet i 6061 T6 aluminium.
Komplett Trigger Kit inkluderer avtrekker, avtrekkerstang, avtrekkerblokk, utstøter, kontakt, avtrekkerfjær, og en lettvekts rustfritt stål tennstiftsikkerhetsplunger og fjær.

Attributes

Finish: Black,Red Make: Glock Modell: 22,23,35,27 Style: Competition,Adjustable Leveringsvekt: 0,045kg Frakthøyde: 10mm Fraktbredde: 89mm Fraktlengde: 147mm UPC : 811745021126

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.c

Produktnr.: 100004112
ZEV TECHNOLOGIES COMPLETE TRIGGER KIT, .40 S&W/.357 SIG GEN 1-3
Produsentnr.: FULDRP40BB 811745021119 Praktiske sett kombinerer enkel drop-in montering med ytelsesfordelene til en tilpasset avtrekkerjobb for å gi din Glock® et ultra-glatt avtrekk, klar utløsning og kort tilbakestilling uten å påvirke påliteligheten til fabrikkens sikkerhetssystemer. Fullt justerbar for forløp og overreise via to lett tilgjengelige sekskant-skruer (nøkkel inkludert), slik at du kan finjustere avtrekkerfølelsen til dine eksakte krav for maksimal kontroll. Avtrekkerskoen og avtrekkersikkerheten er presisjonsmaskinert fra 6061 T6 aluminiumsblokk for presis engasjement, jevn bevegelse og enestående respons. Engasjeringsflatene på den rustfrie stål avtrekkerstangen er speilpolert for enestående følsomhet og konsistens. Grunnleggende Fulcrum-avtrekker inkluderer forhåndsmontert avtrekkersko, sikkerhetsarm og avtrekkerstang. Komplett Trigger Kit inneholder avtrekkeren, avtrekkerstangen, avtrekkerblokken, utstøteren, kontakten, avtrekkerfjæren, og en lettvekts rustfritt stål tennstiftsikkerhetsplunger og fjær for å ytterligere forfine avtrekket. Leveres med en redusert-kraft slagfjær for å produsere en lettere avtrekkerfølelse for konkurranse, og en fabrikkvekt slagfjær for daglig bæring og tjenestebruk.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Finish: Stainless Steel, Aluminum Make: Glock Modell: 17, 19, 22, 23, 24, 34, 35, 26, 27 Style: Adjustable, Drop-In

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppgrader din Glock® med FULCRUM DROP-IN TRIGGER KIT! 🔥 Nyt et ultra-glatt avtrekk og justerbar kontroll for maksimal ytelse.

Precise Letoff, Fast Rest, Fully-Adjustable For Takeup & Overtravel; Drop-In Installation

SPECS: .45 DROP IN AND ULTIMATE ONLY FIT .45 ACP. IN GEN-1 THRU GEN-3 GUNS. 10mm uses a different firing pin safety diameter that can't be used on a .45 nor can the .45 be used on the 10mm.

Mer...

Presis Utløsning, Rask Tilbakestilling, Fullt Justerbar For Forløp & Overreise; Drop-In Montering

Mer...

Kundevurderinger for ZEV TECHNOLOGIES FULCRUM DROP-IN TRIGGER KIT GEN 1-3 GLOCK .40 CAL RED SAFETY

Antall vurderinger: 12
Fra brownells.com: 12
Gjennomsnittsvurdering: 4

Nope! (13.05.2016)

Best Glock Trigger Ever! (19.05.2010)

Best Trigger Available for Glocks! (25.05.2010)

Finger tip trigger feel is much smoother with the Fulcrum trigger safety. Product delivers a 3 lbs pull that has a shorter pull and faster reset. This one is a winner!

Turned my 34 into a nail gun (04.06.2010)