All Foolproof sights (except TK models) use the Short Elevation Knob. The Long Elevation Knob is for use with Foolproof-TK target sights. The Elevation Gib Lock Knob fits both standard Foolproof and Foolproof-TK models
SPECS: Aluminum, black, anodized. Steel screws. This may require fitting by grinding the tip of the threads to fit some sights.
Mer...
Alle Foolproof sikter (unntatt TK-modeller) bruker den korte høydejusteringsknappen. Den lange høydejusteringsknappen er for bruk med Foolproof-TK sikter for målskyting. Låseknappen for høydejusteringskilen passer både standard Foolproof og Foolproof-TK modeller
SPECS: Aluminium, svart, anodisert. Stålskruer. Dette kan kreve tilpasning ved å slipe enden av gjengene for å passe noen sikter.
Mer...
Kundevurderinger for WILLIAMS GUN SIGHT TARGET ELEVATION KNOB, LONG
Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 4,5
Fits well, but long(27.11.2011)
This screw is for some reason about 1/8th inch too long (same for the one for my FP788-TK). Either hacksaw or grind off the extra length to match the stock gib lock screw and it fits perfect. If it wasn't for the slight annoyance with trimming it to length, I'd give it a 5.
Not for ruger 77(04.06.2016)
The short windage screw is too short for the fp model sight designed for the ruger 77 rifles. I returned it for the long instead, great quality and easy installation , and great service from brownells. The short elevation screw is correct for this same sight though, maybe this can save somebody the extra shipping I paid for my mistake ð
Perfect fit to Upgrade w/Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
Exact fit to upgrade to Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
Produktnr.: 962157240 WILLIAMS GUN SIGHT TARGET ELEVATION KNOB, LONG Produsentnr.: 11525053506115259 Alle Foolproof sikter (unntatt TK-modeller) bruker den korte høydejusteringsknappen. Den lange høydejusteringsknappen er for bruk med Foolproof-TK sikter for målskyting. Låseknappen for høydejusteringskilen passer både standard Foolproof og Foolproof-TK modeller
Produktnr.: 962000079 WILLIAMS GUN SIGHT TARGET ELEVATION GIB LOCK KNOB Produsentnr.: 61613005350616130 Alle Foolproof sikter (unntatt TK-modeller) bruker den korte høydejusteringsknappen. Den lange høydejusteringsknappen er for bruk med Foolproof-TK sikter for målskyting. Låseknappen for høydejusteringskilen passer både standard Foolproof og Foolproof-TK modeller
249NOK29kr 249,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 962157250 WILLIAMS GUN SIGHT TARGET ELEVATION KNOB, SHORT Produsentnr.: 11524053506115242 Alle Foolproof sikter (unntatt TK-modeller) bruker den korte høydejusteringsknappen. Den lange høydejusteringsknappen er for bruk med Foolproof-TK sikter for målskyting. Låseknappen for høydejusteringskilen passer både standard Foolproof og Foolproof-TK modeller
Produktnr.: 962157520 WILLIAMS GUN SIGHT TARGET WINDAGE KNOB, LONG Produsentnr.: 15752053506157525 Alle Foolproof sikter (unntatt TK-modeller) bruker den korte høydejusteringsknappen. Den lange høydejusteringsknappen er for bruk med Foolproof-TK sikter for målskyting. Låseknappen for høydejusteringskilen passer både standard Foolproof og Foolproof-TK modeller
Produktnr.: 962157530 WILLIAMS GUN SIGHT TARGET WINDAGE KNOB, SHORT Produsentnr.: 15753053506157532 Alle Foolproof sikter (unntatt TK-modeller) bruker den korte høydejusteringsknappen. Den lange høydejusteringsknappen er for bruk med Foolproof-TK sikter for målskyting. Låseknappen for høydejusteringskilen passer både standard Foolproof og Foolproof-TK modeller
All Foolproof sights (except TK models) use the Short Elevation Knob. The Long Elevation Knob is for use with Foolproof-TK target sights. The Elevation Gib Lock Knob fits both standard Foolproof and Foolproof-TK models
SPECS: Aluminum, black, anodized. Steel screws. This may require fitting by grinding the tip of the threads to fit some sights.
Mer...
Alle Foolproof sikter (unntatt TK-modeller) bruker den korte høydejusteringsknappen. Den lange høydejusteringsknappen er for bruk med Foolproof-TK sikter for målskyting. Låseknappen for høydejusteringskilen passer både standard Foolproof og Foolproof-TK modeller
SPECS: Aluminium, svart, anodisert. Stålskruer. Dette kan kreve tilpasning ved å slipe enden av gjengene for å passe noen sikter.
Mer...
Kundevurderinger for WILLIAMS GUN SIGHT TARGET ELEVATION KNOB, LONG
Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 4,5
Fits well, but long(27.11.2011)
This screw is for some reason about 1/8th inch too long (same for the one for my FP788-TK). Either hacksaw or grind off the extra length to match the stock gib lock screw and it fits perfect. If it wasn't for the slight annoyance with trimming it to length, I'd give it a 5.
Not for ruger 77(04.06.2016)
The short windage screw is too short for the fp model sight designed for the ruger 77 rifles. I returned it for the long instead, great quality and easy installation , and great service from brownells. The short elevation screw is correct for this same sight though, maybe this can save somebody the extra shipping I paid for my mistake ð
Perfect fit to Upgrade w/Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
Exact fit to upgrade to Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.