Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

BROWNELLS
EXTRA-LARGE BENCH BLOCKS

050806006256 080000492

Large, 4" Diameter, Useable Surface Will Not Embed Or Mar

Extra size and weight helps keep these blocks where you put them and the big face eliminates much of the “balancing act” when you’re driving pins. Cannot mar even the most highly polished surface. Two different models. Green - For rifles and shotguns; drilled with four through holes for easier pin removal and disassembly. Convenient, center “V” holds cylindrically shaped parts steady so they won’t roll. Blue - For revolvers and pistols. Larger through holes and partial “V” holds pistol barrels for easier link pin installation and removal. Can be drilled or modified with hand tools; will not melt when machined.

SPECS: Polyethylene, green or blue. 4" (10cm) diameter, 1-1⁄8" (2.8cm) high.

Mer...

Stor, 4" Diameter, Brukbar Overflate Vil Ikke Innkapsle Eller Skade

Ekstra størrelse og vekt hjelper med å holde disse blokkene på plass, og den store flaten eliminerer mye av den "balansekunsten" når du driver ut pinner. Kan ikke skade selv de mest polerte overflatene. To forskjellige modeller. Grønn - For rifler og hagler; boret med fire gjennomgående hull for enklere fjerning av pinner og demontering. Praktisk, sentrert "V" holder sylindrisk formede deler stabile slik at de ikke ruller. Blå - For revolvere og pistoler. Større gjennomgående hull og delvis "V" holder pistol løp for enklere installasjon og fjerning av koblingspinner. Kan bores eller modifiseres med håndverktøy; vil ikke smelte ved maskinering.

SPECS: Polyetylen, grønn eller blå. 4" (10cm) diameter, 1-1⁄8" (2.8cm) høy.

Mer...

Kundevurderinger for BROWNELLS RIFLE BENCH BLOCK

Antall vurderinger: 12
Fra brownells.com: 12
Gjennomsnittsvurdering: 4,8

Hamd bench tool (18.11.2009)

Any time I had to drive a pin I had to find a hole in my work bench to allow the pin to drop into. With this inexpensive little gem, I not only have the hole, but I also have a vee notch to steady the firearm. Works like a charm. well worth the money even if you only need it once.

Great item (20.11.2009)

greatly eases the process of removing a variety of pins from the frames of numerous types of handguns. keeps you from maring the frame on the table when removing the pins.

Very useful (02.05.2011)

This block is great for a number of gunsmithing jobs. I use it often. Its very durable and wont mar the finish on your guns

Versatile block (09.02.2015)

Since I had this block, goodbye to all those wood blocks that I could just find around when doing gunsmithing. I love the holes for the pins to drop and the channel across this block which secures barrels, slides during repair our punching out pins.

Mainspring housing woes? Get this! (04.05.2016)

Disassembling a 1911 mainspring housing with lanyard loop is a snap with this block. Position the housing so it doesn't move with loop down in a hole, press down (hard, always) and remove the retainer pin. Avoid the dreaded vice claws and don't be afraid to clean out your housing and replace the spring. Of course, I also use the block for anything that needs to be punched out. Armorer's plates are great but $$$. I consider this a versatile tool at a value price.

Invaluable tool (16.09.2009)

This tool makes driving pins in and out a piece of cake. Any repair kit is incomplete without a good bench block, and this is a very good bench block.

A must for any bench (08.11.2009)

This thing can take a beating. Perfect for driving out pins and you can drill it easily to make custom jig.

It really won't mar either.

wow (21.11.2009)

I can't believe I've gotten along without one for so long! Easily modified to meet your individual needs.

Must have rifle tool (07.03.2012)

Great product, prevents marring your rifle while working on it. Great if you're putting together your own lowers.

Just what the Doctor Ordered (12.06.2015)

The best bench block for all your rifle needs very durable, you can't go wrong with this item.

Large and Versitle for Rifles (14.09.2015)

I used this block immediately upon delivery to install a different AR15 fire control group. This block is very large with good sized through holes to drive a varitey of pins. I think the V channel will also be excellent for laying a Ruger MKII/III barrel on when tapping in those uncooperative bolt retention/mainspring packs. Definitely a must have along with a gunsmithing hammer with plastic/delrin and brass faces. A big roll of duct tape has always worked for me, but I like the V channel of this block that gives it some more versatility. I'll be grabbing this block instead of the duct tape roll now.

Works Fine (17.05.2016)

Worked fine with my AR15. But before I used it, I sanded down the edges of the center channel since it was still a little rough, and also to make the edges more "curved" instead it's sharp angle.

When I removed the pin from my FSB, some of the black phosphate finish rubbed off. I'll apply some electrical tape on the edges next time I use it.

Les 12 flere anmeldelser fra brownells.com

749 749 2 NOK

Produktnr.: 080000492
BROWNELLS RIFLE BENCH BLOCK
Produsentnr.: NONE 050806006256 Ekstra størrelse og vekt hjelper med å holde disse blokkene på plass, og den store flaten eliminerer mye av den "balansekunsten" når du driver ut pinner. Kan ikke skade selv de mest polerte overflatene. To forskjellige modeller. Grønn - For rifler og hagler; boret med fire gjennomgående hull for enklere fjerning av pinner og demontering. Praktisk, sentrert "V" holder sylindrisk formede deler stabile slik at de ikke ruller. Blå - For revolvere og pistoler. Større gjennomgående hull og delvis "V" holder pistol løp for enklere installasjon og fjerning av koblingspinner. Kan bores eller modifiseres med håndverktøy; vil ikke smelte ved maskinering.

749 NOK 114 kr 749,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: Universal Rifles

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Ekstra størrelse og vekt hjelper med å holde blokkene på plass, og den store flaten eliminerer behovet for "balansekunst" når du driver ut pinner.
Grønn modell er for rifler og hagler med fire gjennomgående hull og en sentrert "V" for stabilitet, mens blå modell er for revolvere og pistoler med større hull og delvis "V".
Kan bores eller modifiseres med håndverktøy; vil ikke smelte ved maskinering.

Attributes

Make: Universal Rifles Leveringsvekt: 0,249kg Frakthøyde: 36mm Fraktbredde: 99mm Fraktlengde: 97mm UPC : 050806006256

Elementdetaljer

Made in USA

Produktnr.: 080000493
BROWNELLS PISTOL BENCH BLOCK
Produsentnr.: NONE 050806006263 Ekstra størrelse og vekt hjelper med å holde disse blokkene på plass, og den store flaten eliminerer mye av den "balansekunsten" når du driver ut pinner. Kan ikke skade selv de mest polerte overflatene. To forskjellige modeller. Grønn - For rifler og hagler; boret med fire gjennomgående hull for enklere fjerning av pinner og demontering. Praktisk, sentrert "V" holder sylindrisk formede deler stabile slik at de ikke ruller. Blå - For revolvere og pistoler. Større gjennomgående hull og delvis "V" holder pistol løp for enklere installasjon og fjerning av koblingspinner. Kan bores eller modifiseres med håndverktøy; vil ikke smelte ved maskinering.

749 NOK 292 kr 749,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: Universal Handguns

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppdag EXTRA-LARGE BENCH BLOCKS fra BROWNELLS! 🎯 Perfekte for rifler og pistoler, gir stabilitet og enkel fjerning av pinner.

Large, 4" Diameter, Useable Surface Will Not Embed Or Mar

SPECS: Polyethylene, green or blue. 4" (10cm) diameter, 1-1⁄8" (2.8cm) high.

Mer...

Stor, 4" Diameter, Brukbar Overflate Vil Ikke Innkapsle Eller Skade

SPECS: Polyetylen, grønn eller blå. 4" (10cm) diameter, 1-1⁄8" (2.8cm) høy.

Mer...

Kundevurderinger for BROWNELLS RIFLE BENCH BLOCK

Antall vurderinger: 12
Fra brownells.com: 12
Gjennomsnittsvurdering: 4,8

Hamd bench tool (18.11.2009)

Great item (20.11.2009)

greatly eases the process of removing a variety of pins from the frames of numerous types of handguns. keeps you from maring the frame on the table when removing the pins.

Very useful (02.05.2011)

This block is great for a number of gunsmithing jobs. I use it often. Its very durable and wont mar the finish on your guns

Versatile block (09.02.2015)

Mainspring housing woes? Get this! (04.05.2016)

Invaluable tool (16.09.2009)

This tool makes driving pins in and out a piece of cake. Any repair kit is incomplete without a good bench block, and this is a very good bench block.

A must for any bench (08.11.2009)

This thing can take a beating. Perfect for driving out pins and you can drill it easily to make custom jig.

It really won't mar either.

wow (21.11.2009)

I can't believe I've gotten along without one for so long! Easily modified to meet your individual needs.

Must have rifle tool (07.03.2012)

Great product, prevents marring your rifle while working on it. Great if you're putting together your own lowers.

Just what the Doctor Ordered (12.06.2015)

The best bench block for all your rifle needs very durable, you can't go wrong with this item.

Large and Versitle for Rifles (14.09.2015)