Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

PRECISION REFLEX
DPMS/KAC 308 BARREL NUT WRENCH

090222549838 100010967

Barrel Nut Torq Wrench for DPMS & KAC Rifles. This wrench allows the shooter to put the exact amount of pressure needed on the barrel nut while attaching the barrel to the receiver. Constructed of 3/8 high steel with 4 lugs on each side to accommodate the DPMS and KAC Barrel Nuts. Works with any 3/8 or ½ drive torque wrench. This wrench is for 24-tooth free float barrel nuts.

SPECS: Weight - .525 lbs. Fits DPMS, R-25, Knights barrel nut patterns in .308.

Mer...

Løpsmutter Momentnøkkel for DPMS & KAC Rifler. Denne nøkkelen lar skytteren påføre akkurat mengden trykk som trengs på løpsmutteren mens løpet festes til mottakeren. Konstruert av 3/8 høy stål med 4 lugs på hver side for å passe til DPMS og KAC løpsmuttere. Fungerer med enhver 3/8 eller ½ tommers momentnøkkel. Denne nøkkelen er for 24-tanns fri flyt løpsmuttere.

SPECS: Vekt - .525 lbs. Passer til DPMS, R-25, Knights løpsmutter mønstre i .308.

Mer...

Kundevurderinger for PRECISION REFLEX DPMS/KAC 308 BARREL NUT WRENCH

Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 3,8

Pins bent at 30 ft-lbs of torque (27.04.2013)

Set torque wrench to 30 ft-lbs. Hand tightened barrel nut first. After getting to 30 ft-lbs I noticed two of the pins bent from the torque. With bent pins, the wrench is no longer usable. So now waiting on the DPMS wrench to get the barrel nut lined up for the gas tube.

Good tool no issues (02.09.2013)

I used this wrench for 10 308 builds with no issues at all. The only thing I would suggest for any wrenches of this type is lengthen the drive squares farther from center so all torque wrenches will work. Great product

Works Like A Charm (18.12.2014)

Awesome tool. Well constructed.

On my first try to torque down my barrel nut on 30 ft. lbs., it went very smooth. Second time I pushed it to 40, no problems at all. Third time I pushed it to 50 and barely got my gas tube opening aligned. Lastly pushed it to 55 and nailed it with a breeze.

To prevent pins bent, flush the tool all the way to the barrel nut and you'll be styling.

Too big for my DPMS 308 Nut (16.03.2016)

Not sure how many stars to give an item that seems to be good quality, but doesn't fit what it should. I bought this wrench to use on an AR-308 built using a DPMS barrel nut ( 231000300 ), only to find that it was too big. Ended up using my PRI standard AR barrel nut wrench.

Quality Tool (23.03.2016)

i bought this to do an M5 build(6.5cm) using the Aero Precision barrel nut. i found out i need an AR15 wrench and not this one! i will be returning it but not due to bad quality, just an errror in judgement on my part(didn't read AP's intructions)!

the only thing i didn't like about the tool just looking at it is the pins seem to be overly long! i think they can be shorter.

i gave it 4 stars just for the quality as i was not able to use it.

GREAT Customer service (14.11.2017)

This wrench was missing from a recent order, (shipping box was crushed and ripped at some point In transit) customer service sent a replacement out quickly. Thank You!

Les 6 flere anmeldelser fra brownells.com

699 699 1 NOK

Produktnr.: 100010967
PRECISION REFLEX DPMS/KAC 308 BARREL NUT WRENCH
Produsentnr.: #03-0086 090222549838 Løpsmutter Momentnøkkel for DPMS & KAC Rifler. Denne nøkkelen lar skytteren påføre akkurat mengden trykk som trengs på løpsmutteren mens løpet festes til mottakeren. Konstruert av 3/8 høy stål med 4 lugs på hver side for å passe til DPMS og KAC løpsmuttere. Fungerer med enhver 3/8 eller ½ tommers momentnøkkel. Denne nøkkelen er for 24-tanns fri flyt løpsmuttere.

699 NOK 0 kr 699,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Make: AR .308

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Løpsmutter Momentnøkkel for DPMS & KAC Rifler, konstruert av 3/8 høy stål med 4 lugs på hver side.
Fungerer med enhver 3/8 eller ½ tommers momentnøkkel og passer til 24-tanns fri flyt løpsmuttere.
Passer til DPMS, R-25, Knights løpsmutter mønstre i .308, med en vekt på .525 lbs.

Attributes

Make: AR .308 Leveringsvekt: 0,227kg Frakthøyde: 30mm Fraktbredde: 56mm Fraktlengde: 152mm UPC : 090222549838

Elementdetaljer

Made in USA

Oppdag DPMS/KAC 308 løpsmutter nøkkel 🔧. Perfekt for presis montering av rifler med 24-tanns løpsmuttere. Kvalitet fra Precision Reflex.

SPECS: Weight - .525 lbs. Fits DPMS, R-25, Knights barrel nut patterns in .308.

Mer...

SPECS: Vekt - .525 lbs. Passer til DPMS, R-25, Knights løpsmutter mønstre i .308.

Mer...

Kundevurderinger for PRECISION REFLEX DPMS/KAC 308 BARREL NUT WRENCH

Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 3,8

Pins bent at 30 ft-lbs of torque (27.04.2013)

Good tool no issues (02.09.2013)

Works Like A Charm (18.12.2014)

Too big for my DPMS 308 Nut (16.03.2016)

Quality Tool (23.03.2016)

GREAT Customer service (14.11.2017)

This wrench was missing from a recent order, (shipping box was crushed and ripped at some point In transit) customer service sent a replacement out quickly. Thank You!

Les 6 flere anmeldelser fra brownells.com