Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

EGW
DESERT EAGLE (POST 2017) VORTEX VIPER/VENOM SIGHT MOUNT

841370116942 296000536
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
0 0 1 NOK
Produktnr.: 296000536
EGW DESERT EAGLE (POST 2017) VORTEX VIPER/VENOM SIGHT MOUNT
Produsentnr.: 49297 841370116942 Materiale: 7075 Aluminium Belegg: Matt svart hardcoat Total lengde: 1.811" Total bredde: .99" Monteringstilbehør: (2) 6-32 knappehodeskruer, (2) 6-32 flat hodeskruer, (1) 6-32 sett skrue Rødpunktsikte tilpasning: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGWs rødpunktsikter er ment å installeres fra venstre mot høyre (med munningen vendt fremover). Sporet har en progressiv avsmalning for å tillate enklere installasjon. Bare fjern baksiktet på våpenet ditt og erstatt det med vår montering for å montere ditt Vortex Viper/Venom, Burris FastFire eller Docter rødpunktsikte. Ingen modifikasjoner er nødvendige. Du kan når som helst ta av vår montering og erstatte baksiktet. Monteringstilbehør inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Siktemonteringen i sporet Stram sett skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Siktemonteringen (plassering av et lite stykke papir mellom rødpunktsiktet og siktemonteringen vil gjøre det lettere å fjerne og vil holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dreiemoment monteringsskruene til 15in/lbs 2 knappehodeskruer - Levert for Vortex Viper og Venom sikter 2 flat hodeskruer - Levert for Burris FastFire og Docter sikter Skruene som følger med denne monteringen krever en 5/64'' unbrakonøkkel for installasjon.
Varsle ved tilgjengelighet
Ikke tilgjengelig.
Spesifikasjoner: Farge: Black Make: Magnum Research Material: Aluminum Modell: Desert Eagle Number of Bases: 1-Piece Style: Tactical

Top takeaways

  1. Materiale: 7075 Aluminium med matt svart hardcoat; passer til Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter rødpunktsikter.
  2. Enkel installasjon uten modifikasjoner; bare fjern baksiktet og erstatt det med EGW montering.
  3. Inkluderer monteringstilbehør og instruksjoner; bruk blå Loctite og stram monteringsskruene til 15 in/lbs.

Attributes

Farge: Black Make: Magnum Research Material: Aluminum Modell: Desert Eagle Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,154kg Frakthøyde: 13mm Fraktbredde: 89mm Fraktlengde: 140mm UPC : 841370116942

Elementdetaljer

Made in USA




Oppgrader din Desert Eagle med EGW Vortex Viper/Venom sight mount! 🦅 Enkel installasjon, holdbar aluminium og stilrent design.

Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Tilbake til toppen