Leveringstid ca. 14-21 dager. 5 stk. på lageret i USA
På lager
Kaliber: 223 WSSM (Winchester Super Short Mag), 243 WSSM (Winchester Super Short Mag), 257 Weatherby Magnum, 6.5 mm Remington Magnum, 270 Weatherby Magnum, 25 WSSM (Winchester Super Short Mag), 6.5 STWProduktnr.: 749005621
611760116070 Reddings femdels shellholder-set er designet slik at du kan justere hodet ditt ved å velge den passende tykkelsen på Redding shellholder. De fem shellholderne er +.002", +.004", +.006", +.008" og +.010" tykkere enn vanlige shellholdere (.125" fra bunnen av hylsehodet til toppen av shellholderen). Hver shellholder er tydelig merket og har en svart oksidfinish for å skille dem fra vanlige shellholdere. Leveres pakket i en 6-posisjons oppbevaringsboks som etterlater et tomrom for din vanlige shellholder. Se Redding Shellholder Diagram.
På lager
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Leveringstid ca. 14-21 dager. 5 stk. på lageret i USA
På lager
Kaliber: 223 WSSM (Winchester Super Short Mag), 243 WSSM (Winchester Super Short Mag), 257 Weatherby Magnum, 6.5 mm Remington Magnum, 270 Weatherby Magnum, 25 WSSM (Winchester Super Short Mag), 6.5 STWProduktnr.: 749005621
Redding’s five piece shellholder set is designed so you can adjust your headspace by selecting the appropriate thickness Redding shellholder. The five shellholders are +.002", +.004", +.006", +.008", and +.010" thicker than normal shellholders (.125" from the bottom of the case head cut to the top of the shellholder). Each shellholder is clearly marked and has a black oxide finish to distinguish them from normal shellholders. Comes packaged in a 6 position storage box leaving an empty space for your regular shellholder. View Redding Shellholder Chart.
Reddings femdels shellholder-set er designet slik at du kan justere hodet ditt ved å velge den passende tykkelsen på Redding shellholder. De fem shellholderne er +.002", +.004", +.006", +.008" og +.010" tykkere enn vanlige shellholdere (.125" fra bunnen av hylsehodet til toppen av shellholderen). Hver shellholder er tydelig merket og har en svart oksidfinish for å skille dem fra vanlige shellholdere. Leveres pakket i en 6-posisjons oppbevaringsboks som etterlater et tomrom for din vanlige shellholder. Se Redding Shellholder Diagram.
Top takeaways
Reddings shellholder-sett lar deg justere hodespillet med fem forskjellige tykkelser: +0,002", +0,004", +0,006", +0,008" og +0,010".
Hver shellholder er tydelig merket og har en svart oksidfinish for enkel identifikasjon.
Settet leveres i en oppbevaringsboks med plass til seks shellholdere, inkludert et tomt rom for din vanlige shellholder.
Attributes
Cartridge:45 Winchester Magnum,6.5 x 55 mm Swedish Mauser,7.5 x 55 mm Swiss
Style:
__ICDummy__
Leveringsvekt:0,091kg
Frakthøyde:18mm
Fraktbredde:64mm
Fraktlengde:99mm
UPC:611760116070
Elementdetaljer
Made in USA
Kundeanmeldelser
Kundevurderinger (4)
3,3 / 5
Ikke anbefalt
Useless Waste of Money 26.01.2017
Following the directions, and using with a Redding press and die, I was unable to bump identical brass with any consistency whatsoever. I did not find this product useful at all, and it's grossly overpriced for a set of shell holders. Should be about $20 even if they are useful to you. I love made in the USA, and Redding is a good company, but I returned this product.
Anbefalt
Cartridge headspace made easy 25.12.2010
The best accuracy a centrefire rifle can deliver usually requires hand-loaded ammunition that precisely fits the chamber. A Redding Competition Shellholder Set used with a Redding Body Die or FLS die provides a simple and straight forward method of resizing fired cases to neatly fit the chamber with a practical minimum of 0.001" to 0.002" of headspace clearance. For the most consistent results, use a good quality sizing lube such as Imperial Wax. Operate the press handle slowly when resizing, and allow the case to experience the full pressure of resizing for a few seconds at the top of the ram stroke. Cartridges properly prepared for hand-loading using this approach will chamber snugly and without resistance with the axis of the cartridge centrally aligned with the bore.
Anbefalt
Make cartridge headspace easy 25.12.2010
The best accuracy a centrefire rifle can deliver usually requires hand-loaded ammunition that precisely fits the chamber. A Redding Competition Shellholder Set used with a Redding Body Die or FLS die provides a simple and straight forward method of resizing fired cases to neatly fit the chamber with a practical minimum of 0.001" to 0.002" of headspace clearance. For the most consistent results, use a good quality sizing lube such as Imperial Wax. Operate the press handle slowly when resizing, and allow the case to experience the full pressure of resizing for a few seconds at the top of the ram stroke. Cartridges properly prepared for hand-loading using this approach will chamber snugly and without resistance with the axis of the cartridge centrally aligned with the bore.
Anbefalt
Cartridge headspace made easy 25.12.2010
The best accuracy a centrefire rifle can deliver usually requires hand-loaded ammunition that precisely fits the chamber. A Redding Competition Shellholder Set used with a Redding Body Die or FLS die provides a simple and straight forward method of resizing fired cases to neatly fit the chamber with a practical minimum of 0.001" to 0.002" of headspace clearance. For the most consistent results, use a good quality sizing lube such as Imperial Wax. Operate the press handle slowly when resizing, and allow the case to experience the full pressure of resizing for a few seconds at the top of the ram stroke. Cartridges properly prepared for hand-loading using this approach will chamber snugly and without resistance with the axis of the cartridge centrally aligned with the bore.
Vi opplevde en feil under innlasting av dette innholdet. Vennligst last inn siden på nytt for å fortsette. Hvis problemet vedvarer, ta kontakt med kundeservice.