BROWNELLS
COMPETITION REAR SIGHT BLADE KIT

078000012

Provides A Sharp, Easy-To-Align Sight Picture

Flat blade gives a crisp, target-style sight picture that eliminates the distracting Òdouble-notchÓ found on factory sights. .160" high blade (same as factory) features an angled and serrated rear face that reduces glare. Extends over the rear of the sight body for a cleaner look and gives a slight increase in sight radius. Available in two notch widths, .110" for target and PPC use, plus .125" for IPSC, IDPA and pin shooting. Deeper notch gives easier eye alignment.

SPECS: 6061-T6 aluminum, matte black, anodized. Heat treated. .700" (17.8mm) blade width, .371" (9.4mm) height, .350" (8.9mm) long. .085" (2.2mm) deep notch. Kit includes windage screw assembly for installation. Fits Smith & Wesson K, L, and N frame revolvers. Will work on all with adjustable sights.

Mer...

Gir et skarpt, lett-å-justere siktebilde

Flat blad gir et skarpt, målrettet siktebilde som eliminerer den distraherende "dobbelt-hakken" funnet på fabrikksikter. .160" høyt blad (samme som fabrikk) har en vinklet og serrert bakside som reduserer gjenskinn. Strekker seg over baksiden av siktelegemet for et renere utseende og gir en liten økning i sikteradius. Tilgjengelig i to hakkebredder, .110" for mål og PPC-bruk, pluss .125" for IPSC, IDPA og pin-skyting. Dypere hakk gir enklere øyejustering.

SPECS: 6061-T6 aluminium, matt svart, anodisert. Varmebehandlet. .700" (17.8mm) bladbredde, .371" (9.4mm) høyde, .350" (8.9mm) lengde. .085" (2.2mm) dyp hakk. Settet inkluderer vindjusteringsskruesett for montering. Passer til Smith & Wesson K, L, og N rammerevolvere. Vil fungere på alle med justerbare sikter.

Mer...

Kundevurderinger for BROWNELLS COMPETITION REAR SIGHT BLADE KIT .110"

Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 4,8

Great choice (08.03.2013)

This is being used on a S&W 625JM for competitive shooting. Searching the web, some people complained that the new blade had "play" and would wiggle around. Not the case for me, it's in there rock solid. In full disclosure I had a revolver gunsmith install it for minimal cost, so I can't say how difficult it was to put on. It's worth it though, the sight picture is incredible for a fraction of the cost compared to other options. The notch is a perfect .125" and appears to be slightly deeper, which is good. It also comes with the replacement parts for installation which is something other brands don't do, about a $10-15 value. It's a very functional piece that I expect will help my scores, especially on the long shots. It really should come with this from the factory. If used on a self-defense revolver there is a chance it could snag on clothing, as the edges are sharp, but for a competition gun that's a good thing.

extraordinary rear sight (05.08.2011)

Excellent product for smith & wesson k-frame 14 model target masterpiece.

Great upgrade (06.06.2012)

I didn't read the description completely and ordered a new windage screw. This kit comes with the screw/nut/detent/and spring to replace the hardware you have to break to put the new blade in.

This blade pairs great with a sdm fiber optic front. I have them on my 617-4 and my 686-5

Works great for the price. All you need (02.08.2017)

Sight is easy enough to install if you follow the directions.

It includes EVERYTHING you need, and some spares in case you lose bits. Nice touch.

Once installed, it's tighter in windage vs the stock sight. But there's a slight amount of rotational (fore aft) play, which because of the rear offset, results in slight up/down play.

Most likely it won't make a noticeable effect during target shooting, but we will test it pushing it both ways and see if it changes point of impact.

Sight picture Is VASTLY superior to stock. I found the .110 aperture perfect on an S&W 625 with 5" barrel.

For defensive use, the stock sight is stronger simply because it doesn't have a large piece hanging off the back. I suspect a strong hit will bend or break this aluminum unit. But for paper punching, even hunting, you can't beat the sight picture. It's really outstanding.

Les 4 flere anmeldelser fra brownells.com

749 749 2 NOK

Produktnr.: 078000012
BROWNELLS COMPETITION REAR SIGHT BLADE KIT .110" Flat blad gir et skarpt, målrettet siktebilde som eliminerer den distraherende "dobbelt-hakken" funnet på fabrikksikter. .160" høyt blad (samme som fabrikk) har en vinklet og serrert bakside som reduserer gjenskinn. Strekker seg over baksiden av siktelegemet for et renere utseende og gir en liten økning i sikteradius. Tilgjengelig i to hakkebredder, .110" for mål og PPC-bruk, pluss .125" for IPSC, IDPA og pin-skyting. Dypere hakk gir enklere øyejustering.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Make: Smith & Wesson Modell: K Frame, L Frame, N Frame Sight Color: Black Style: Target

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Flat bladdesign gir et skarpt siktebilde og eliminerer "dobbelt-hakken" funnet på fabrikksikter.
Tilgjengelig i to hakkebredder: .110" for mål og PPC-bruk, og .125" for IPSC, IDPA, og pin-skyting.
Laget av 6061-T6 aluminium med matt svart anodisert finish, passer til Smith & Wesson K, L, og N rammer.

Attributes

Make: Smith & Wesson Modell: K Frame,L Frame,N Frame Sight Color: Black Style: Target Leveringsvekt: 0,045kg Frakthøyde: 30mm Fraktbredde: 79mm Fraktlengde: 135mm

Elementdetaljer

Made in USA

Produktnr.: 078000013
BROWNELLS COMPETITION REAR SIGHT BLADE KIT .125" 050806003309 Flat blad gir et skarpt, målrettet siktebilde som eliminerer den distraherende "dobbelt-hakken" funnet på fabrikksikter. .160" høyt blad (samme som fabrikk) har en vinklet og serrert bakside som reduserer gjenskinn. Strekker seg over baksiden av siktelegemet for et renere utseende og gir en liten økning i sikteradius. Tilgjengelig i to hakkebredder, .110" for mål og PPC-bruk, pluss .125" for IPSC, IDPA og pin-skyting. Dypere hakk gir enklere øyejustering.

749 NOK 0 kr 749,00 *