Drop-in replacement trigger gives increased leverage for lighter "felt" trigger pull. Wide, smooth face provides faster trigger access for better combat shooting. Installation deactivates magazine disconnect so actual trigger pull may measure lighter.
SPECS: Steel, Blue, matte finish or Silver, hard chrome, finish. Trigger face .35" (8.9mm) wide, .65" (16.6mm) long. Wt. .4 oz. (11g). Includes instructions.
Mer...
Glatt Combat-stil, Letter "Følt" Avtrekkskraft
Drop-in erstatningsavtrekker som gir økt vektstangseffekt for en lettere "følt" avtrekkskraft. Bred, glatt flate gir raskere tilgang til avtrekker for bedre kampskyting. Installasjonen deaktiverer magasinutkoblingen så den faktiske avtrekkskraften kan måle lettere.
SPECS: Stål, Blått, matt finish eller Sølv, hardforkrommet finish. Avtrekkerflate .35" (8.9mm) bred, .65" (16.6mm) lang. Vekt .4 oz. (11g). Inkluderer instruksjoner.
Mer...
Kundevurderinger for CYLINDER & SLIDE BROWNING HI-POWER TRIGGER
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 3,5
Great trigger(18.12.2009)
This trigger is well made with a good smooth finish on the trigger, good weight, durable and drops right in. Very little stone work needed. Not to mention a tight trigger pull with great results on the range.
wide trigger.(26.07.2010)
If you are a High Power guy.... this is the only trigger you will want! Well worth the price! Fred
Flawed By Design(17.01.2013)
Flawed by Design ! This trigger is manufactured with a receiving recess that is to large for the trigger lever to work correctly. Consequently, when you install the trigger assembly, the tension from the trigger spring causes the trigger lever to cant sideways and tension itself against the frame. This causes the trigger not to recover correctly when tuned for a performance trigger pull. I first brought this situation to Bill's (Owner of C&S) attention 4 years ago. He admitted the flaw and committed to changing it on the next production run. Four years later they are doing it again ! When I brought this to their attention this time, I received a refund ! Please don't use this product until C&S fix the problem. Ironically, I continue to use other trigger parts by C&S with good results. I am a trade school educated, Professional Gunsmith working full time in the industry for the past 15+ years.
out of spec, would not function un BHP(03.04.2013)
I had issues with recess for trigger lever also. When installed, the trigger lever interferred with slide and required shortening trigger lever to install slide. Bad idea. Trigger would trip hammer in dry fire test, but failed to trip hammer during live-fire. I had to order a new trigger lever and re-install old trigger. Shame of it is, years ago I had ordered and installed this trigger on my 1st BHP and it worked great and like the broader trigger face. But the 2nd one I received was junk
Replacement Trigger(05.01.2016)
I had issues with Brownings Magazine Safety plunger. The trigger pull was smooth with a matt finish magazine and gritty and rough with a polished and Blue mag. I decided to eliminate the mag safety. This trigger is a little tricky to install because there is no cut in the trigger for the trigger lever pivot to drop into. But once installed - smooth crisp trigger pull at last!
Good Product.
Excellent Trigger!(15.05.2017)
This trigger is an excellent upgrade to your Hi-Power. If you have no experience in gunsmithing, let a pro do this job. It is
easy to scar the finish around the trigger pin if you have no experience working on BHP's. It is possible that the trigger will need to be fitted to your frame also. Be aware you might need to install the two coil trigger spring if you are installing this trigger into a MKIII. Installation of this trigger also requires the magazine disco safety to be removed - which is a good thing in my opinion. The trigger spring pin from your existing trigger needs to be reused on the C&S trigger, be sure to stake it before installing the trigger. The wide trigger sure helped my finger placement, and the perceived trigger pull weight is less.
Produktnr.: 206035030 CYLINDER & SLIDE BROWNING HI-POWER TRIGGER Produsentnr.: CS0037000000000376 Drop-in erstatningsavtrekker som gir økt vektstangseffekt for en lettere "følt" avtrekkskraft. Bred, glatt flate gir raskere tilgang til avtrekker for bedre kampskyting. Installasjonen deaktiverer magasinutkoblingen så den faktiske avtrekkskraften kan måle lettere.
1349NOK3kr 1 349,00
*
Leveringstid ca. 14-21 dager. 3 stk. på lageret i USA
Spesifikasjoner:Finish: BluedMake: BrowningModell: High PowerStyle: Curved
Drop-in erstatningsavtrekker som gir økt vektstangseffekt og lettere "følt" avtrekkskraft.
Bred, glatt flate for raskere tilgang og bedre kampskyting; deaktiverer magasinutkoblingen for lettere avtrekkskraftmåling.
Tilgjengelig i stål med blått, matt finish eller sølv, hardforkrommet finish; inkluderer instruksjoner for installasjon.
Attributes
Finish:
Blued
Make:
Browning
Modell:
High Power
Style:
Curved
Leveringsvekt: 0,014kgFrakthøyde: 10mmFraktbredde: 66mmFraktlengde: 140mm
UPC
: 000000000376
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 206035130 CYLINDER & SLIDE SILVER HI-POWER WIDE TRIGGER Produsentnr.: CS037HC Drop-in erstatningsavtrekker som gir økt vektstangseffekt for en lettere "følt" avtrekkskraft. Bred, glatt flate gir raskere tilgang til avtrekker for bedre kampskyting. Installasjonen deaktiverer magasinutkoblingen så den faktiske avtrekkskraften kan måle lettere.
Drop-in replacement trigger gives increased leverage for lighter "felt" trigger pull. Wide, smooth face provides faster trigger access for better combat shooting. Installation deactivates magazine disconnect so actual trigger pull may measure lighter.
SPECS: Steel, Blue, matte finish or Silver, hard chrome, finish. Trigger face .35" (8.9mm) wide, .65" (16.6mm) long. Wt. .4 oz. (11g). Includes instructions.
Mer...
Glatt Combat-stil, Letter "Følt" Avtrekkskraft
Drop-in erstatningsavtrekker som gir økt vektstangseffekt for en lettere "følt" avtrekkskraft. Bred, glatt flate gir raskere tilgang til avtrekker for bedre kampskyting. Installasjonen deaktiverer magasinutkoblingen så den faktiske avtrekkskraften kan måle lettere.
SPECS: Stål, Blått, matt finish eller Sølv, hardforkrommet finish. Avtrekkerflate .35" (8.9mm) bred, .65" (16.6mm) lang. Vekt .4 oz. (11g). Inkluderer instruksjoner.
Mer...
Kundevurderinger for CYLINDER & SLIDE BROWNING HI-POWER TRIGGER
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 3,5
Great trigger(18.12.2009)
This trigger is well made with a good smooth finish on the trigger, good weight, durable and drops right in. Very little stone work needed. Not to mention a tight trigger pull with great results on the range.
wide trigger.(26.07.2010)
If you are a High Power guy.... this is the only trigger you will want! Well worth the price! Fred
Flawed By Design(17.01.2013)
Flawed by Design ! This trigger is manufactured with a receiving recess that is to large for the trigger lever to work correctly. Consequently, when you install the trigger assembly, the tension from the trigger spring causes the trigger lever to cant sideways and tension itself against the frame. This causes the trigger not to recover correctly when tuned for a performance trigger pull. I first brought this situation to Bill's (Owner of C&S) attention 4 years ago. He admitted the flaw and committed to changing it on the next production run. Four years later they are doing it again ! When I brought this to their attention this time, I received a refund ! Please don't use this product until C&S fix the problem. Ironically, I continue to use other trigger parts by C&S with good results. I am a trade school educated, Professional Gunsmith working full time in the industry for the past 15+ years.
out of spec, would not function un BHP(03.04.2013)
I had issues with recess for trigger lever also. When installed, the trigger lever interferred with slide and required shortening trigger lever to install slide. Bad idea. Trigger would trip hammer in dry fire test, but failed to trip hammer during live-fire. I had to order a new trigger lever and re-install old trigger. Shame of it is, years ago I had ordered and installed this trigger on my 1st BHP and it worked great and like the broader trigger face. But the 2nd one I received was junk
Replacement Trigger(05.01.2016)
I had issues with Brownings Magazine Safety plunger. The trigger pull was smooth with a matt finish magazine and gritty and rough with a polished and Blue mag. I decided to eliminate the mag safety. This trigger is a little tricky to install because there is no cut in the trigger for the trigger lever pivot to drop into. But once installed - smooth crisp trigger pull at last!
Good Product.
Excellent Trigger!(15.05.2017)
This trigger is an excellent upgrade to your Hi-Power. If you have no experience in gunsmithing, let a pro do this job. It is
easy to scar the finish around the trigger pin if you have no experience working on BHP's. It is possible that the trigger will need to be fitted to your frame also. Be aware you might need to install the two coil trigger spring if you are installing this trigger into a MKIII. Installation of this trigger also requires the magazine disco safety to be removed - which is a good thing in my opinion. The trigger spring pin from your existing trigger needs to be reused on the C&S trigger, be sure to stake it before installing the trigger. The wide trigger sure helped my finger placement, and the perceived trigger pull weight is less.