Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

050806000148 430106222
The Correct Tool for Safe Installation/Removal of Barrel Nuts on H&K Rifles as well as BRN-4 Rifles! This wrench is a necessary tool if you need to assemble one (or several) of our BRN-4 setups. Actually this tool is a must-have item for anybody who works on H&K Rifles, or Brownells very own BRN-4. When installing or removing the barrel, this wrench precisely engages the slots in the barrel nut, ensuring all the torquing force is evenly applied without the wrench slipping off and damaging the barrel or nut. Just slide the tool over the barrel nut, hand tighten the hex nuts on the tool, and start tightening/loosening the barrel nut using a standard ½” torque wrench (a 1” open-end wrench can be used in a pinch). Precision laser cut from hardened steel with an anti-corrosion matte black finish. Note: This wrench can be used on barrel nuts for Heckler & Koch HK416, HK417, MR556, MR762 rifles, and Brownells BRN-4 configurations.
1549 1549 1 NOK
Produktnr.: 430106222
BROWNELLS BRN-4 BARREL NUT WRENCH
Produsentnr.: BRN-4-BNW 050806000148
1549 NOK 165 kr 1 549,00 *
Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA
Spesifikasjoner: Make: Brownells Modell: BRN-4

Attributes

Make: Brownells Modell: BRN-4 Leveringsvekt: 0,454kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 64mm UPC : 050806000148

Elementdetaljer

Made in USA




Oppdag BRN-4 BARREL NUT WRENCH fra Brownells! 🔧 Perfekt for presisjonsarbeid med løpsverktøy. Kjøp nå for en enklere opplevelse!

The Correct Tool for Safe Installation/Removal of Barrel Nuts on H&K Rifles as well as BRN-4 Rifles! This wrench is a necessary tool if you need to assemble one (or several) of our BRN-4 setups. Actually this tool is a must-have item for anybody who works on H&K Rifles, or Brownells very own BRN-4. When installing or removing the barrel, this wrench precisely engages the slots in the barrel nut, ensuring all the torquing force is evenly applied without the wrench slipping off and damaging the barrel or nut. Just slide the tool over the barrel nut, hand tighten the hex nuts on the tool, and start tightening/loosening the barrel nut using a standard ½” torque wrench (a 1” open-end wrench can be used in a pinch). Precision laser cut from hardened steel with an anti-corrosion matte black finish. Note: This wrench can be used on barrel nuts for Heckler & Koch HK416, HK417, MR556, MR762 rifles, and Brownells BRN-4 configurations.
Tilbake til toppen