Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

Oppnå perfekt polering med BRASS LAP fra BROWNELLS! ✨ Ideell for .38 kaliber og gir en strålende finish til avfasingssnittene.
  • BROWNELLS 18  BRASS LAP FOR .38 CALIBER
  • BROWNELLS 18  BRASS LAP FOR .38 CALIBER
  • BROWNELLS 18  BRASS LAP FOR .38 CALIBER

BROWNELLS BRASS LAPS - BROWNELLS 18 BRASS LAP FOR .38 CALIBER

050806009783 080490388

Varianter:

BROWNELLS 18 BRASS LAP FOR .38 CALIBER
379 NOK 1 kr 379 *
Produktnr.: 080490388
På lager
379 NOK 1 kr 379 *
BROWNELLS 11 BRASS LAP FOR .38-.45 CALIBER
339 NOK 9 kr 339 *
Produktnr.: 080490381
På lager
339 NOK 9 kr 339 *
BROWNELLS 5 BRASS LAP FOR .38/.357 CALIBER
299 NOK 3 kr 299 *
Kaliber: 38/357 Caliber (.357-.359) Produktnr.: 080490385
På lager
299 NOK 3 kr 299 *
BROWNELLS 5 BRASS LAP FOR .44-.45 CALIBER
419 NOK 1 kr 419 *
Kaliber: 44 Caliber (.429-.430), 45 Caliber (.451-.454) Produktnr.: 080490455
På lager
419 NOK 1 kr 419 *
BROWNELLS 32 CALIBER CHAMFERING KIT 11° BRASS LAP
219 NOK 2 kr 219 *
Produktnr.: 080499032
På lager
219 NOK 2 kr 219 *
BROWNELLS 32 CALIBER CHAMFERING KIT 18° BRASS LAP
219 NOK 1 kr 219 *
Produktnr.: 080499033
På lager
219 NOK 1 kr 219 *
BROWNELLS 22 CALIBER CHAMFERING KIT 11° BRASS LAP
289 NOK 4 kr 289 *
Produktnr.: 080499220
På lager
289 NOK 4 kr 289 *
BROWNELLS 18 BRASS LAP FOR .45 CALIBER
379 NOK 0 kr 379 *
Produktnr.: 080490458
Kommer til lager
379 NOK 0 kr 379 *
219 419 8 NOK
379 NOK kr 379

Priser inkl. mva. pluss levering

Produktnr.: 080490388

050806009783 For de som ønsker å sette det siste preget av perfeksjon. 5°, 11° og 18° messinglapper brukes med veldig fint slipemiddel, som trenger inn i messing og fungerer som en sluttpolering av avfasningskuttene.
På lager
1
2
3
4
5
6
7
8
9
10+

Varianter:

BROWNELLS 18 BRASS LAP FOR .38 CALIBER
379 NOK 1 kr 379 *
Produktnr.: 080490388
På lager
379 NOK 1 kr 379 *
BROWNELLS 11 BRASS LAP FOR .38-.45 CALIBER
339 NOK 9 kr 339 *
Produktnr.: 080490381
På lager
339 NOK 9 kr 339 *
BROWNELLS 5 BRASS LAP FOR .38/.357 CALIBER
299 NOK 3 kr 299 *
Kaliber: 38/357 Caliber (.357-.359) Produktnr.: 080490385
På lager
299 NOK 3 kr 299 *
BROWNELLS 5 BRASS LAP FOR .44-.45 CALIBER
419 NOK 1 kr 419 *
Kaliber: 44 Caliber (.429-.430), 45 Caliber (.451-.454) Produktnr.: 080490455
På lager
419 NOK 1 kr 419 *
BROWNELLS 32 CALIBER CHAMFERING KIT 11° BRASS LAP
219 NOK 2 kr 219 *
Produktnr.: 080499032
På lager
219 NOK 2 kr 219 *
BROWNELLS 32 CALIBER CHAMFERING KIT 18° BRASS LAP
219 NOK 1 kr 219 *
Produktnr.: 080499033
På lager
219 NOK 1 kr 219 *
BROWNELLS 22 CALIBER CHAMFERING KIT 11° BRASS LAP
289 NOK 4 kr 289 *
Produktnr.: 080499220
På lager
289 NOK 4 kr 289 *
BROWNELLS 18 BRASS LAP FOR .45 CALIBER
379 NOK 0 kr 379 *
Produktnr.: 080490458
Kommer til lager
379 NOK 0 kr 379 *

Beskrivelse:

Vis original (engelsk)
For de som ønsker å sette det siste preget av perfeksjon. 5°, 11° og 18° messinglapper brukes med veldig fint slipemiddel, som trenger inn i messing og fungerer som en sluttpolering av avfasningskuttene.

Attributes

  • Degree: -
  • Kaliber: -
  • Våpentype: Universal Handguns
  • Leveringsvekt: 0,009kg
  • Fraktbredde: 83mm
  • Fraktlengde: 146mm
  • UPC: 050806009783

Elementdetaljer

Made in USA

Kundeanmeldelser

Kundevurderinger (1)

5 / 5
Klart anbefalt

Brownells USA Used for my Ruger 10/22T recrown 31.07.2010

The factory crown was rough and eccentric on my 10/22T, so I cut my barrel, polished the new muzzle on a disk sander perfectly smooth and flat, threaded this lap onto my brass cleaning rods (bought at W**Mart), then taped the rod with enough teflon plumber's tape every 4" to barely fit into the barrel (the tape squishes flat as it goes into the bore, so put plenty on), loaded the lap with a little cerium oxide abrasive (used to pitch lap telescope mirrors) mixed with Lucas Red #2 wheel grease (to form a paste) and then attached my cordless drill to the end of the brass rod sticking out of the barrel's breech end. Go slow, check progress often. You want to "just" polish down to the point where the muzzle's lands "almost" touch the grooves. Then use a bit of 1000 grit rouge (also called crocus) cloth wrapped around the tool instead of the abrasive paste to make a 1 or 2 thousands deep "ring" which is barely visible at your muzzle to finish the transition from the barrel lands to groove depth which, if done with care, will give you a better crown than anything money can buy. Go slow, think and shoot straight. The teflon tape around your cleaning rod should keep your bore safe. Be sure not to contaminate the bore with abrasive by only using a paste -- never powdered abrasives by themselves. This process requires hours of work to do it best, but a fine crown is critical to best accuracy if you're a paper puncher. Finish by giving your bore a Brownell's JB Borepaste treatment using first a cleaning brush loaded up for 20 strokes or so, then a cleaning patch with more JB on a tight fitting jag, clean thoughly, oil the bore, patch dry and shoot em up more like the big dollar guns.

Oops! Noe gikk galt.

Vi opplevde en feil under innlasting av dette innholdet. Vennligst last inn siden på nytt for å fortsette. Hvis problemet vedvarer, ta kontakt med kundeservice.

Tilbake til toppen