Aircraft-grade aluminum adapter rail lets you use Picatinny scope 3/8" or European 11mm dovetail mounts found on many bolt-action rimfire rifles. Six crossbolts apply even pressure along length of dovetail to keep the adapter rail centered. Generous cross slots give you increased scope ring and optics choices, whether for weekend plinking or informal competition. Perfect for mounting a red dog sight. Clamping screws also fit into pre-drilled holes to equally spread the legs so you can easily slip the mount onto oversized rails. Extends approximately .620" above dovetail. 4" single rail weighs 3.1 oz. (g). Two 1" rail sections weigh .75 oz. (g) each. Hardcoat anodized, matte black finish.
Mer...
Adapterrail i flygradet aluminium lar deg bruke Picatinny sikteskinne 3/8" eller europeisk 11mm svalehaleskinne som finnes på mange bolt-action salongrifler. Seks tverrbolter fordeler trykket jevnt langs lengden av svalehalen for å holde adapterrailen sentrert. Generøse tverrslisser gir deg økt utvalg av sikteringer og optikk, enten det er for helgeplinking eller uformell konkurranse. Perfekt for montering av et red dog-sikte. Klemmeskruene passer også inn i forhåndsborrede hull for å jevnt fordele beina slik at du enkelt kan skli monteringen på overdimensjonerte skinner. Stikker omtrent .620" over svalehalsen. 4" enkelt rail veier 3.1 oz. (g). To 1" rail seksjoner veier .75 oz. (g) hver. Hardcoat anodisert, matt svart finish.
Mer...
Kundevurderinger for BKL TECHNOLOGIES 2-PIECE DOVETAIL TO WEAVER ADAPTER MOUNT
Antall vurderinger: 2
Fra brownells.com: 2
Gjennomsnittsvurdering: 3,5
Rail Mounting Problems(17.04.2014)
I successfully mounted this blk technologies weaver/ picatinny monolithic rail adapter to the "SWISS PRODUCTS SCHMIDT-RUBIN K31 SCOPE MOUNT" with no problems. In this respect the product is fine
However, when trying to mount my Larue QD LT112 rifle scope mount to this monolithic rail, the cross slots of the rail did not align with the slots of the riflescope mount. Thus I could not mount my riflescope.
Just to make sure it wasn't user error, I removed a riflescope, with standard 2 piece rings, from another rifle I had. It had been mounted on picatinny rails, but it too did not fit on the blk technologies rail.
So I guess this picatinny weaver adapter from blk technologies can only use 2 piece rings, not monolithic scope rings. Also, those 2 piece rings will be set at a different measurement than MIL-STD-1913 rails or its affiliates; you can't just swap your QD riflescope between rails because they won't fit.
I'll send this back in and get the 2 piece adapter, but I just can't help but wonder, why did they machine it like this?
Nice Dovetail to Weaver Rail(18.04.2017)
I used this rail on an old yet fun to shoot Glenfield Marlin model 75 dovetail then topped it off with a Bushnell trs-25 red dot. A very welcome relief to some aging eyes. The rail fit very nicely and snugged up very tight. It's simple to install and comes with the required allen wrench. It takes up the entire length of the dovetail on the model 75 and looks pretty cool. You will want to measure your dovetail and make sure it is "standard" width. I like the fact it is one piece so the finish looks very good.
And of course Brownell's is second to none with shipping and order tracking. Overall very happy with this purchase.
Produktnr.: 749012540 BKL TECHNOLOGIES 2-PIECE DOVETAIL TO WEAVER ADAPTER MOUNT Produsentnr.: BKL566MB814136025215 Adapterrail i flygradet aluminium lar deg bruke Picatinny sikteskinne 3/8" eller europeisk 11mm svalehaleskinne som finnes på mange bolt-action salongrifler. Seks tverrbolter fordeler trykket jevnt langs lengden av svalehalen for å holde adapterrailen sentrert. Generøse tverrslisser gir deg økt utvalg av sikteringer og optikk, enten det er for helgeplinking eller uformell konkurranse. Perfekt for montering av et red dog-sikte. Klemmeskruene passer også inn i forhåndsborrede hull for å jevnt fordele beina slik at du enkelt kan skli monteringen på overdimensjonerte skinner. Stikker omtrent .620" over svalehalsen. 4" enkelt rail veier 3.1 oz. (g). To 1" rail seksjoner veier .75 oz. (g) hver. Hardcoat anodisert, matt svart finish.
Adapterrail i flygradet aluminium som lar deg bruke Picatinny sikteskinne på 3/8" eller 11mm svalehaleskinne.
Seks tverrbolter fordeler trykket jevnt for å holde adapterrailen sentrert, og generøse tverrslisser gir økt utvalg av sikteringer og optikk.
Hardcoat anodisert, matt svart finish med to 1" rail seksjoner som veier .75 oz. (g) hver.
Attributes
Farge:
Black
Material:
Aluminum
Number of Bases:
2-Piece
Style:
Dovetail Style Bases,Picatinny
Leveringsvekt: 0,136kgFrakthøyde: 61mmFraktbredde: 107mmFraktlengde: 183mm
UPC
: 814136025215
Elementdetaljer
Made in USA
Produktnr.: 749012541 BKL TECHNOLOGIES 4" DOVETAIL TO WEAVER ADAPTER MOUNT Produsentnr.: BKL568MB814136025222 Adapterrail i flygradet aluminium lar deg bruke Picatinny sikteskinne 3/8" eller europeisk 11mm svalehaleskinne som finnes på mange bolt-action salongrifler. Seks tverrbolter fordeler trykket jevnt langs lengden av svalehalen for å holde adapterrailen sentrert. Generøse tverrslisser gir deg økt utvalg av sikteringer og optikk, enten det er for helgeplinking eller uformell konkurranse. Perfekt for montering av et red dog-sikte. Klemmeskruene passer også inn i forhåndsborrede hull for å jevnt fordele beina slik at du enkelt kan skli monteringen på overdimensjonerte skinner. Stikker omtrent .620" over svalehalsen. 4" enkelt rail veier 3.1 oz. (g). To 1" rail seksjoner veier .75 oz. (g) hver. Hardcoat anodisert, matt svart finish.
Aircraft-grade aluminum adapter rail lets you use Picatinny scope 3/8" or European 11mm dovetail mounts found on many bolt-action rimfire rifles. Six crossbolts apply even pressure along length of dovetail to keep the adapter rail centered. Generous cross slots give you increased scope ring and optics choices, whether for weekend plinking or informal competition. Perfect for mounting a red dog sight. Clamping screws also fit into pre-drilled holes to equally spread the legs so you can easily slip the mount onto oversized rails. Extends approximately .620" above dovetail. 4" single rail weighs 3.1 oz. (g). Two 1" rail sections weigh .75 oz. (g) each. Hardcoat anodized, matte black finish.
Mer...
Adapterrail i flygradet aluminium lar deg bruke Picatinny sikteskinne 3/8" eller europeisk 11mm svalehaleskinne som finnes på mange bolt-action salongrifler. Seks tverrbolter fordeler trykket jevnt langs lengden av svalehalen for å holde adapterrailen sentrert. Generøse tverrslisser gir deg økt utvalg av sikteringer og optikk, enten det er for helgeplinking eller uformell konkurranse. Perfekt for montering av et red dog-sikte. Klemmeskruene passer også inn i forhåndsborrede hull for å jevnt fordele beina slik at du enkelt kan skli monteringen på overdimensjonerte skinner. Stikker omtrent .620" over svalehalsen. 4" enkelt rail veier 3.1 oz. (g). To 1" rail seksjoner veier .75 oz. (g) hver. Hardcoat anodisert, matt svart finish.
Mer...
Kundevurderinger for BKL TECHNOLOGIES 2-PIECE DOVETAIL TO WEAVER ADAPTER MOUNT
Antall vurderinger: 2
Fra brownells.com: 2
Gjennomsnittsvurdering: 3,5
Rail Mounting Problems(17.04.2014)
I successfully mounted this blk technologies weaver/ picatinny monolithic rail adapter to the "SWISS PRODUCTS SCHMIDT-RUBIN K31 SCOPE MOUNT" with no problems. In this respect the product is fine
However, when trying to mount my Larue QD LT112 rifle scope mount to this monolithic rail, the cross slots of the rail did not align with the slots of the riflescope mount. Thus I could not mount my riflescope.
Just to make sure it wasn't user error, I removed a riflescope, with standard 2 piece rings, from another rifle I had. It had been mounted on picatinny rails, but it too did not fit on the blk technologies rail.
So I guess this picatinny weaver adapter from blk technologies can only use 2 piece rings, not monolithic scope rings. Also, those 2 piece rings will be set at a different measurement than MIL-STD-1913 rails or its affiliates; you can't just swap your QD riflescope between rails because they won't fit.
I'll send this back in and get the 2 piece adapter, but I just can't help but wonder, why did they machine it like this?
Nice Dovetail to Weaver Rail(18.04.2017)
I used this rail on an old yet fun to shoot Glenfield Marlin model 75 dovetail then topped it off with a Bushnell trs-25 red dot. A very welcome relief to some aging eyes. The rail fit very nicely and snugged up very tight. It's simple to install and comes with the required allen wrench. It takes up the entire length of the dovetail on the model 75 and looks pretty cool. You will want to measure your dovetail and make sure it is "standard" width. I like the fact it is one piece so the finish looks very good.
And of course Brownell's is second to none with shipping and order tracking. Overall very happy with this purchase.