BARNES BULLETS TIPPED TSX® 6MM (.243") POLYMER TIP BOAT TAIL RIFLE BULLETS - BARNES BULLETS TSX 6MM (0.243") TIPPED BT 80GR 50/BOX

I load this bullet in my 300 win mag at close to 3100 fps. Very accurate bullet. Also expands great even on small African plains game at 400 yards. Outstanding penetrating power as well. As long as you're over 2400 fps or so you'll get expansion.

Elgjakt ladet i 308 e med cfe 223 til rundt 900 ms.
Lite blodslått kjøtt og kula holder godt sammen

I loaded these over 42 gr of IMR 4064 in my .308 gas gun and shot sub 1/2 MOA groups. Much more accurate than I every expected.

I have never used Barnes bullets before due to the price... I decided to take a leap of faith after building my 6.5 Grendel and I was not disappointed. I loaded them to factory recommendation, under a full load of RL-15 (my favorite powder, check with Barnes recommendation for what I loaded) and used a Wolf LR primer (all I can find around my area) with PPU once fired brass (not the best, but works decent enough). Surprisingly, this load fell DIRECTLY where my 123 A-Max (factory Hornady) load shoots, so zeroing the rifle was easy... I got this bullet for shooting Kansas Whitetail, where distance is not uncommon. My chrono was 2580fps out of a 24" barrel, AR-15 platform (Barnes calls for over 2700fps...) These rounds, without any tweaking, fell within a half inch circle at 100 yards (5 shots). I took them out this weekend and finally found a white tail I was able to get broadside. It was a 120lb deer, running parallel with me. I lead the deer just a shade too much and fired. Distance was about 100 yards, bullet entered JUST in front of the right shoulder, missing the bone, entered the body, shredded half the heart and smashed directly into the middle of the left shoulder blade. You can see that even after 2-3" of penetration (before hitting the heart) the bullet had expanded. After exiting the left shoulder, the exit hole was about the size of a silver dollar, and the bone was turned to dust, literally looked like sand in the wound. The deer limped another 50 yards and dropped where it expired. I will purchase more of these so I don't have to worry about finding another bullet in the future, as I found my hunting bullet. This is coming from a die hard Hornady guy, but they don't offer a 6.5 in 100gn... hint hint. Barnes filled that spot and they did an EXCELLENT job of it.

This excellent bullet is used for reloading a 7 x 30 Waters fired from a 21 inch scoped T/C Contender. This is my go to combination for hunting anything from eastern deer to large hogs.

So far, I have yet to fire a second round. Hard to beat one shot kills.

FIrst came across this round when hunting Kudu. The bullet had not exited. I was amazed to seethe perfect way the 4 petals had opened. They were not flexible. The bullet is a cutting tool rather than a plough.



Have used this round on Roe, Muntjac and fallow deer with excellent results. No excessive meat damage even with muntjac! From my evidence I believe this is the best bullet I've found bar none. I even use the TSX 250g in my 9.3 x 62 for Roe. Yes they do expand. I have yet to have a runner when using this bullet.

I was disappointed Barns did not make 160 gr. bullet in 7 mm

So I used the 150 on cow elk. The load was a little over 3000

fps in my 1968 model Rem. 700 and son-in-law"s 1975 model Winchester 70 Rem 7mm mag. There were 2 shots at 200

yards(one was through both shoulders) and 1 at 50 yards. All 3 shot were pass through and exit

wound appeared to indicate good expansion. I guess Barns

felt there was no need for 160 grain. I would agree on these elk

I did not need a bigger bullet. Plus, you gain a little more velocity and a little less recoil.

I decided to load this 130 gr Barnes TTSX when it first came out for my son-in-laws short barreled Rem M-7 in 308 Win. The increased velocity from a near max load of Benchmark powder flattened trajectory and he has dropped two very good E. Wash mule deer bucks with the load. They went nowhere!!

I also have a old bolt action 300 Sav. that shoots the load very accurately, but I haven't hunted it yet. The M-7 shoots consistent 1/2 to 3/4 inch groups at 100 yards. What else can you say! The only problem is finding someone that has them in stock when you need more of them. So far Brownell's has been my savior.

Paper target shooting is what I do prior to a hunt.
I get amazing accuracy with Dad's Sporter thin barreled Savage off-the-shelf 30.06 at 400 yards and Barnes 168 Grain TTSX all copper bullets. I shoot 3-5/8" 5-shot groups at 400 yards and clover leaf .270" center to center groups at 100 yards. I use Varget + fire-formed, neck sized Federal brass with Federal 210M primers. This is the "Sweet" load for this gun. (Your results may vary)

A friend gave me a handfull to try. This is just one great bullet. The amount of energy that was deleavered was awesome and didn't destroy the meat that bad.

Excellent deer bullet for the 7.62x39 round

In developing a good load for deer hunting in my Sako .270 Winchester, I found that the Barnes bullets to be among the most accurate. I settled on the 110 gr. tipped TSX. My final load ended up at a velocity of 3,220 fps. I just got back from a hunting trip where I was extremely pleased with the performance of this bullet on a deer. Excellent product for hunting efficiency.