Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

812526023834 430106543
BCM® A/T™ Optic Mounts Capability in the face of the unexpected and catastrophic, the BCM A/T Mount is built in anticipation of a “no fail” shot that will save another human life. PERFORMANCE WITHOUT PEER Improving on Mil-Spec rail interfaces dating back over 30 years, the BCM A/T mount delivers unprecedented zero retention on a properly mounted red dot optic. Low profile and snag-free, BCM A/T Mounts are built with a minimal number of components - delivering a stronger component with less points of failure, ready to take on dynamic and adverse settings. Each A/T Mount features multiple integral recoil lugs to mitigate recoil and counter recoil to preserve your zero and ensure “no fail” shots are placed where intended by the trained rifleman. Starting at 2.15 oz, each 7075T6 billet mount is hard coat anodized per Mil-A-8625F. Additionally, both the steel alloy clamp and nut are hardened with Nitride coating. THE ANGLED TORQUE™ LOCK-UP A/T (Angled Torque) mounts employ angled torque through a patented* clamp which applies triangulating force to create a stronger and more reliable lock up of the mount onto the end user’s rail. To retain the hardware in field conditions, this system uses a serrated locking spring-washer to prevent the loss of torque on the shaft nut. With an equivalent load applied, the A/T Mount delivers approximately twice the clamping force at the picatinny rail, versus a legacy horizontal interface. * US Patent D973.826, and other patents pending THE FLEET The A/T fleet is built optimized for both a variety of missions and proven red dot optics. Aimpoint® T-2, T-1 and CompM5 series: The Marksman lower 1/3 co-witness The Close Combat 1.93” Trijicon® MRO® The Marksman lower 1/3 co-witness The Close Combat 1.93” MADE IN AMERICA All BCM components and accessories unite state of the art manufacturing with lightweight and durable materials to ensure components that last a lifetime, performing far beyond performance requirements established nearly six decades ago. Aimpoint, T-2, T-1, CompM5 trademarks are property of Aimpoint Inc. Trijicon, MRO trademarks are property of Trijicon Inc.
2299 2299 4 NOK
Produktnr.: 430106543
BRAVO COMPANY BCM LOWER 1/3 AT OPTIC MOUNT FOR AIMPOINT MICRO T2
Produsentnr.: BCM-OM-AT-21 812526023834
2299 NOK 2 kr 2 299,00 *
Leveringstid ca. 14-21 dager.
2 stk. på lageret i USA
Spesifikasjoner: Farge: Black Fits / Used For: Aimpoint Micro T1

Attributes

Farge: Black Fits / Used For: Aimpoint Micro T1 Leveringsvekt: 0,454kg Frakthøyde: 70mm Fraktbredde: 95mm Fraktlengde: 114mm UPC : 812526023834

Elementdetaljer

Made in USA




Produktnr.: 430106544
BRAVO COMPANY BCM 1.93" AT OPTIC MOUNT FOR AIMPOINT MICRO T2
Produsentnr.: BCM-OM-AT-22 812526023841
2299 NOK 7 kr 2 299,00 *
Leveringstid ca. 14-21 dager.
7 stk. på lageret i USA
Spesifikasjoner: Farge: Black Fits / Used For: Aimpoint Micro T1

Attributes

Farge: Black Fits / Used For: Aimpoint Micro T1 Leveringsvekt: 0,454kg Frakthøyde: 70mm Fraktbredde: 102mm Fraktlengde: 114mm UPC : 812526023841

Elementdetaljer

Made in USA

Produktnr.: 430106545
BRAVO COMPANY BCM LOWER 1/3 AT OPTIC MOUNT FOR TRIJICON MRO
Produsentnr.: BCM-OM-AT-271 812526023858
2299 NOK 4 kr 2 299,00 *
Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA
Spesifikasjoner: Farge: Black Fits / Used For: Trijicon MRO

Attributes

Farge: Black Fits / Used For: Trijicon MRO Leveringsvekt: 0,454kg Frakthøyde: 70mm Fraktbredde: 95mm Fraktlengde: 114mm UPC : 812526023858

Elementdetaljer

Made in USA

Produktnr.: 430106546
BRAVO COMPANY BCM 1.93" AT OPTIC MOUNT FOR TRIJICON MRO
Produsentnr.: BCM-OM-AT-272 812526023865
2299 NOK 8 kr 2 299,00 *
Leveringstid ca. 14-21 dager.
8 stk. på lageret i USA
Spesifikasjoner: Farge: Black Fits / Used For: Trijicon MRO

Attributes

Farge: Black Fits / Used For: Trijicon MRO Leveringsvekt: 0,454kg Frakthøyde: 70mm Fraktbredde: 102mm Fraktlengde: 114mm UPC : 812526023865

Elementdetaljer

Made in USA

Oppdag AT OPTIC MOUNTS fra BRAVO COMPANY! Perfekt for Aimpoint Micro T2🔭. Få en solid og stilren montering i svart.

BCM® A/T™ Optic Mounts Capability in the face of the unexpected and catastrophic, the BCM A/T Mount is built in anticipation of a “no fail” shot that will save another human life. PERFORMANCE WITHOUT PEER Improving on Mil-Spec rail interfaces dating back over 30 years, the BCM A/T mount delivers unprecedented zero retention on a properly mounted red dot optic. Low profile and snag-free, BCM A/T Mounts are built with a minimal number of components - delivering a stronger component with less points of failure, ready to take on dynamic and adverse settings. Each A/T Mount features multiple integral recoil lugs to mitigate recoil and counter recoil to preserve your zero and ensure “no fail” shots are placed where intended by the trained rifleman. Starting at 2.15 oz, each 7075T6 billet mount is hard coat anodized per Mil-A-8625F. Additionally, both the steel alloy clamp and nut are hardened with Nitride coating. THE ANGLED TORQUE™ LOCK-UP A/T (Angled Torque) mounts employ angled torque through a patented* clamp which applies triangulating force to create a stronger and more reliable lock up of the mount onto the end user’s rail. To retain the hardware in field conditions, this system uses a serrated locking spring-washer to prevent the loss of torque on the shaft nut. With an equivalent load applied, the A/T Mount delivers approximately twice the clamping force at the picatinny rail, versus a legacy horizontal interface. * US Patent D973.826, and other patents pending THE FLEET The A/T fleet is built optimized for both a variety of missions and proven red dot optics. Aimpoint® T-2, T-1 and CompM5 series: The Marksman lower 1/3 co-witness The Close Combat 1.93” Trijicon® MRO® The Marksman lower 1/3 co-witness The Close Combat 1.93” MADE IN AMERICA All BCM components and accessories unite state of the art manufacturing with lightweight and durable materials to ensure components that last a lifetime, performing far beyond performance requirements established nearly six decades ago. Aimpoint, T-2, T-1, CompM5 trademarks are property of Aimpoint Inc. Trijicon, MRO trademarks are property of Trijicon Inc.
Tilbake til toppen