Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

BREEK ARMS
AR 308 WAHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE

812296030919 430107002
The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits 308 AR Variants – See List Below Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses No gunsmith required Made in America COMPATIBLE WITH- Aero M5, DPMS Gen1 High and Low, Knights Armament SR25, STAG-10, Armalite AR10, Daniel Defense DD5 V3, V4, V5, and many others using DPMS Gen1 or Armalite AR10 platform. NOT COMPATIBLE WITH- SIG716, Savage MSR10, Smith and Wesson M&P10, DPMS R-25 Gen II, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE AR-10/.308 or others using a DPMS Gen2 style upper.  
1199 1299 4 NOK
Produktnr.: 430107002
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE BLK
Produsentnr.: BRK557 812296030919
1299 NOK 31 kr 1 299,00 *
Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA
Spesifikasjoner: Finish: Black Hand: Ambidextrous Make: AR .308 Style: Short

Attributes

Finish: Black Hand: Ambidextrous Make: AR .308 Style: Short Leveringsvekt: 0,082kg Frakthøyde: 32mm Fraktbredde: 80mm Fraktlengde: 229mm UPC : 812296030919

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x



Produktnr.: 430107003
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE FDE
Produsentnr.: BRK557-FDE 812296030926
1299 NOK 22 kr 1 299,00 *
Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA
Spesifikasjoner: Finish: Flat Dark Earth Hand: Ambidextrous Make: AR .308 Style: Short
Produktnr.: 430107004
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE GRY
Produsentnr.: BRK557-MGRAY 812296030933
1199 NOK 34 kr 1 199,00 *
Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA
Spesifikasjoner: Finish: Gray Hand: Ambidextrous Make: AR .308 Style: Short
Produktnr.: 430107005
BREEK ARMS AR 308 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE ODG
Produsentnr.: BRK557-RGREEN 812296030940
1199 NOK 34 kr 1 199,00 *
Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA
Spesifikasjoner: Finish: O.D. Green Hand: Ambidextrous Make: AR .308 Style: Short

Oppdag den AR 308 Warhammer Micro Mod2 ambidextrous charging handle fra Breek Arms! ⚙️ Perfekt for alle AR .308 entusiaster.

The WARHAMMER is an incredibly affordable upgrade compared to other 308 charging handles in the market without sacrificing the quality that Breek Arms is proud of. The Warhammer will substantially increase the use of your .308 / 7.62 AR as an easy drop in upgrade. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits 308 AR Variants – See List Below Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses No gunsmith required Made in America COMPATIBLE WITH- Aero M5, DPMS Gen1 High and Low, Knights Armament SR25, STAG-10, Armalite AR10, Daniel Defense DD5 V3, V4, V5, and many others using DPMS Gen1 or Armalite AR10 platform. NOT COMPATIBLE WITH- SIG716, Savage MSR10, Smith and Wesson M&P10, DPMS R-25 Gen II, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762, POF ROGUE AR-10/.308 or others using a DPMS Gen2 style upper.  
0
På lager
kr 1 049,00
0
På lager
kr 549,00
Tilbake til toppen