Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

M4 SKINNY STYLE CARBINE HANDGUARD

841348100201 100004515

Rugged, Drop-In Replacement For M4-Style Factory Handguard

Snap-on USGI-type replacement for your carbine’s factory-original handguard is made of tough, fiberglass-reinforced, injection-molded polymer that delivers superior impact and abrasion resistance. The ridged gripping surface and top/bottom vent holes retain the weapon’s authentic military look, while an internal heat shield of lightweight aluminum protects your hand from barrel heat. Skinny models have standard-issue single-layer heat shield on upper and lower handguard. Skinny M4 model has narrower diameter for operators who prefer a minimal bulk handguard. Fits AR-15/M16/M4 with carbine-length gas system.

SPECS: Fiberglass-reinforced polymer, matte black. 6½” (16.5cm) long. Skinny – Approx. 2¼” O.D. at rear tapering to 2” (5.1cm) O.D. at front. Single heat shield only.

Mer...

Robust, plug-and-play-erstatning for M4-stil fabrikk forskjefte

Snap-on USGI-type erstatning for din karabins fabrikkoriginale forskjefte er laget av robust, fiberglass-forsterket, sprøytestøpt polymer som gir overlegen støt- og slitasjemotstand. Det riflete gripeflaten og ventilasjonshullene øverst/nederst beholder våpenets autentiske militære utseende, mens et internt varmeskjold av lettvekts aluminium beskytter hånden din mot løpsvarme. Skinny-modeller har standard enkeltlags varmeskjold på øvre og nedre forskjefte. Skinny M4-modellen har en smalere diameter for operatører som foretrekker et forskjefte med minimal størrelse. Passer AR-15/M16/M4 med karabinlengde gassystem.

SPECS: Fiberglass-forsterket polymer, matt svart. 6½” (16.5cm) lang. Skinny – Omtrentlig 2¼” O.D. bak som smalner til 2” (5.1cm) O.D. foran. Enkelt varmeskjold kun.

Mer...

Kundevurderinger for DOUBLE STAR SKINNY M4 CARBINE HANDGUARD

Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 5

I would buy these again (11.05.2013)

Good Quality,color matched my rifle perfect,fit with no triming,I would buy these again and recomend them to customers

Highly Recommended (05.07.2013)

Simple - it fits, it looks good, it feels good and the price can't be beat !!! Thanks Brownells

For a better small hand fit (28.05.2014)

These grips are perfect for people like me that have smaller hands The feel is just right. They come in handy for younger shooters too who feel more comfortable being able to wrap more of their hands around them. They really do give better control. Have them on all of my AR style rifles. Lastly, they go on real easy.

Great handguards (21.04.2015)

Used these to replace the factory handguards on my Ruger AR-556 so I could add a rail and foregrip. Worked great and looks nice, too. Very happy!

<img width="500" src='/userdocs/reviewimages/791c1e79-8272-4ac8-b7eb-5982a9c71a2b.jpg' alt=''>

Great replacement handguard (05.10.2015)

Excellent replacement for oversized, double-heatshield handguards now used on Colt CAR-15s. These are a near perfect match for the original slim handguards that used to come standard on Colt CAR rifles. They are much easier to grip than the larger style. Great quality.

Great product but does not fit Bushmaste (03.11.2015)

I noted that one of the reviewers talked bout fitness issue for Bushmaster. But, I still placed order and received the product within only 3 business days. Fast delivery, great quality, beautiful appearance, it does not fit Bushmaster directly on the large end. But, it is not a big deal. I spent only one hour with basic hand tools modifying the lip structure slightly. Then, it fitted in almost perfectly without any noticeable issue. Satisfied completely. I am very handy, but I still believe anybody can get the project done with maybe a little longer time.

Excellent - will buy again (20.07.2016)

Tight, solid fit. Seams line up perfectly. Doesn't flex, move or give when handled. I purchased one because I needed it. After that I purchased two more just to replace a couple of cheapy ones I was using. Highly recommend, excellent. I'm going to keep my eye on this brand as I look for other items.

Great Handguard, with a little fitting (28.06.2017)

Had to sand down ever so slightly the end that went into the delta ring. After install, was good snug fit. Looks great on my two LMTs

Worth Much More ! (18.06.2018)

I have a PSA A4 upper that came with PSA's hand guards which are odd at best. They are oval in shape, not round, and are quite large (fat). I ordered these skinny hand guards, but to be honest I wasn't expecting much due to the low cost. I'm glad I took the chance because they popped on with zero issues or difficulty. They seem quite well made, no squeak/wiggle etc. I plan on ordering another pair to keep on the shelf for a future build.

Great and unbelievable low price (04.07.2018)

Never put one on before. Had top rotated a little and didn't notice. Seemed to fit about 95% but after looking at it, a slight 1/16" twist let it lock into place perfectly. Looks great on my Colt 6720 and if you didn't have my 6721 or Lightweight Sporter there beside it, you'd not notice any difference from OEM. Way better than the double heat shield stock unit.

Les 10 flere anmeldelser fra brownells.com

299 299 1 NOK

Produktnr.: 100004515
DOUBLE STAR SKINNY M4 CARBINE HANDGUARD
Produsentnr.: AR414 841348100201 Snap-on USGI-type erstatning for din karabins fabrikkoriginale forskjefte er laget av robust, fiberglass-forsterket, sprøytestøpt polymer som gir overlegen støt- og slitasjemotstand. Det riflete gripeflaten og ventilasjonshullene øverst/nederst beholder våpenets autentiske militære utseende, mens et internt varmeskjold av lettvekts aluminium beskytter hånden din mot løpsvarme. Skinny-modeller har standard enkeltlags varmeskjold på øvre og nedre forskjefte. Skinny M4-modellen har en smalere diameter for operatører som foretrekker et forskjefte med minimal størrelse. Passer AR-15/M16/M4 med karabinlengde gassystem.

299 NOK 117 kr 299,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Farge: Black Lengde: 6 Make: AR-15 Material: Polymer Style: Smooth Type: Drop-In

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Robust erstatningsforskjefte laget av fiberglass-forsterket polymer med overlegen støt- og slitasjemotstand.
Skinny-modell med smalere diameter og enkeltlags varmeskjold, ideell for operatører som foretrekker minimal størrelse.
Passer AR-15/M16/M4 med karabinlengde gassystem, og gir et autentisk militært utseende med riflete gripeflate og ventilasjonshull.

Attributes

Farge: Black Length: 6 Make: AR-15 Material: Polymer Style: Smooth Type: Drop-In Leveringsvekt: 0,136kg Frakthøyde: 58mm Fraktbredde: 58mm Fraktlengde: 185mm UPC : 841348100201

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.y.1

Oppgrader din AR-15 med Double Star Skinny Style Carbine Handguard! 💪 Laget av robust polymer for overlegen holdbarhet og stil.

Rugged, Drop-In Replacement For M4-Style Factory Handguard

SPECS: Fiberglass-reinforced polymer, matte black. 6½” (16.5cm) long. Skinny – Approx. 2¼” O.D. at rear tapering to 2” (5.1cm) O.D. at front. Single heat shield only.

Mer...

Robust, plug-and-play-erstatning for M4-stil fabrikk forskjefte

SPECS: Fiberglass-forsterket polymer, matt svart. 6½” (16.5cm) lang. Skinny – Omtrentlig 2¼” O.D. bak som smalner til 2” (5.1cm) O.D. foran. Enkelt varmeskjold kun.

Mer...