Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

M4 BUTTSTOCK TOOL

050806107236 080000291

One Tool For Disassembling & Reassembling Buttstocks

Our handy, compact tool is uniquely designed to combine several tools into one. It has a spanner wrench that fits the receiver extension castle nut on M4-style collapsible buttstocks, with interchangeable pins to fit nuts with both old (round) and new (square) teeth, so you're ready for whatever type of nut is on the gun in front of you. Pins for both styles are included and easily changed by loosening a hex screw in the tool. For fixed rifle buttstocks, there's a screwdriver blade to remove the buttplate screws and a wrench for the nut on the receiver extension (buffer) tube. There's even a ½" square opening for a torque wrench, and even a hole for hanging the tool on your peg-board. Fits easily in a range bag or in your pocket for use outside the shop.

SPECS: Steel, black. 7" (17.8cm) long. Includes pins for old- and new-style stock ring retainers.

Mer...

Ett verktøy for demontering & montering av kolber

Vårt hendige, kompakte verktøy er unikt designet for å kombinere flere verktøy i ett. Det har en skiftenøkkel som passer til mottakerforlengerens slottsmutter på M4-stil sammenleggbare kolber, med utskiftbare pinner for å passe muttere med både gamle (runde) og nye (kvadratiske) tenner, slik at du er forberedt på hvilken som helst type mutter som er på våpenet foran deg. Pinner for begge stiler er inkludert og enkelt byttet ved å løsne en sekskantskrue på verktøyet. For faste riflekolber er det et skrutrekkerblad for å fjerne skruene på kolbeplaten og en nøkkel for mutteren på mottakerforlengerens (buffer) rør. Det er til og med en ½" kvadratåpning for en momentnøkkel, og til og med et hull for å henge verktøyet på din verkstedstavle. Passer lett i en skyteveske eller i lommen for bruk utenfor verkstedet.

SPECS: Stål, svart. 7" (17.8cm) lang. Inkluderer pinner for gamle og nye typer lager ringfester.

Mer...

Kundevurderinger for BROWNELLS AR-15/M16/M4 BUTTSTOCK TOOL

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 5

Great tool (16.09.2009)

This is a solid and effective tool for its stated purpose.

Awsome (16.09.2011)

This wrench is awsome, perfict fit, works great..

Spend the money to get great tools not cheap ones!

Very nice tool (29.02.2012)

This one works as advertised. It's very durable and functional, though a bit pricey. But you get what you pay for...

Solid Tool! Worth the Price! (23.02.2014)

This wrench is solid! The replacable pin is a great feature. My only recommendation would be to machine a place somewhere on the wrench to store the other pin when not in use.

M16/M4 Buttstock Tool by BROWNELLS (15.03.2014)

If you want the best this is the one to get . Fit, feel and finish is second to none. Well worth the money.

Well made. Inspired confidence. (01.04.2014)

I purchased this tool with some concern. I have an older AR-15 that had a 2 position collapsible stock with the 2 round holes instead of the normal castle nut and were well staked in place. I had been told how difficult some staked castle nuts were to remove. A friend who has built several AR-15's suggested just cutting the castle nut with a dremel which would likely destroy the tube as well. I wanted to remove the parts but retain them for collectors purposes and switch them out for a current 6 position stock tube. I just clamped the lower receiver in a vise using Brownells rubber faced vise jaws and was able to remove the ring without damage to the lower or the castle nut. I did tap the wrench with a plastic mallet several times before attempting to loosen the castle nut. This tool worked like a charm and I have already told several other people how well it worked. Brownells guarantee gave me the confidence to try it myself instead of paying someone else to remove the stock nut for me.

Great tool, just one hiccup (22.11.2015)

So I gave this 5 stars, despite my hiccup.

This tool is great, it's really well made and feels incredibly sturdy.

My hiccup occurred because I used it on a barrel nut, not a buttstock. If you're using this for your buttstock, no need to read any further...

The Centurion CMR handguard does not come with a tool. Centurion says that you should use a buttstock tool to install the barrel nut since it is the same diameter as the castlenut on a carbine stock. The problem is that you have to use a tool that has one "nub" on it, not three like most others have. These "nubs" aren't meant to torque a barrel nut to 30ft/lbs.

I used my generic amazon AR15 tool to install the barrel nut and caused the "nub" to break off. I bought this thinking it may work for me. This tool has a small replaceable pin (as pictured), which bent and became unusable almost instantly. Luckily, I was able to use a 1/8in punch in the hole perfectly fine.

I'm still 100% happy with this tool, the pin broke because it wasn't designed for the torque but luckily it has a great design where you can replace the pin.

Obviously, the only thing I would change about this is tool is for it to come with a stronger pin. However, if you're building an AR15 you should already have an assortment of punches, which you can use with this tool.

Les 7 flere anmeldelser fra brownells.com

1099 1099 1 NOK

Produktnr.: 080000291
BROWNELLS AR-15/M16/M4 BUTTSTOCK TOOL 050806107236 Vårt hendige, kompakte verktøy er unikt designet for å kombinere flere verktøy i ett. Det har en skiftenøkkel som passer til mottakerforlengerens slottsmutter på M4-stil sammenleggbare kolber, med utskiftbare pinner for å passe muttere med både gamle (runde) og nye (kvadratiske) tenner, slik at du er forberedt på hvilken som helst type mutter som er på våpenet foran deg. Pinner for begge stiler er inkludert og enkelt byttet ved å løsne en sekskantskrue på verktøyet. For faste riflekolber er det et skrutrekkerblad for å fjerne skruene på kolbeplaten og en nøkkel for mutteren på mottakerforlengerens (buffer) rør. Det er til og med en ½" kvadratåpning for en momentnøkkel, og til og med et hull for å henge verktøyet på din verkstedstavle. Passer lett i en skyteveske eller i lommen for bruk utenfor verkstedet.

1099 NOK 0 kr 1 099,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Verktøyet kombinerer flere funksjoner, inkludert en skiftenøkkel for slottsmuttere på M4-stil kolber og skrutrekkerblad for faste riflekolber.
Inkluderer utskiftbare pinner for både gamle (runde) og nye (kvadratiske) tenner, som enkelt byttes med en sekskantskrue.
Inneholder en ½" kvadratåpning for momentnøkkel og et hull for å henge verktøyet, og er kompakt nok til å passe i en skyteveske eller lomme.

Attributes

Make: AR-15 Leveringsvekt: 0,181kg Frakthøyde: 5mm Fraktbredde: 66mm Fraktlengde: 229mm UPC : 050806107236

Elementdetaljer

Made in USA

Oppdag BROWNELLS AR-15/M16/M4 BUTTSTOCK TOOL 🛠️, et kompakt verktøy for enkel justering av riflekolber med utskiftbare pinner!

One Tool For Disassembling & Reassembling Buttstocks

SPECS: Steel, black. 7" (17.8cm) long. Includes pins for old- and new-style stock ring retainers.

Mer...

Ett verktøy for demontering & montering av kolber

SPECS: Stål, svart. 7" (17.8cm) lang. Inkluderer pinner for gamle og nye typer lager ringfester.

Mer...

Kundevurderinger for BROWNELLS AR-15/M16/M4 BUTTSTOCK TOOL

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 5

Great tool (16.09.2009)

This is a solid and effective tool for its stated purpose.

Awsome (16.09.2011)

This wrench is awsome, perfict fit, works great..

Spend the money to get great tools not cheap ones!

Very nice tool (29.02.2012)

This one works as advertised. It's very durable and functional, though a bit pricey. But you get what you pay for...

Solid Tool! Worth the Price! (23.02.2014)

This wrench is solid! The replacable pin is a great feature. My only recommendation would be to machine a place somewhere on the wrench to store the other pin when not in use.

M16/M4 Buttstock Tool by BROWNELLS (15.03.2014)

If you want the best this is the one to get . Fit, feel and finish is second to none. Well worth the money.

Well made. Inspired confidence. (01.04.2014)