Extra Power For Smoother, Quieter, More Reliable Cycling
Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability. Outer-diameter is ground and polished for smooth, quiet movement in the buffer tube. Rifle fits fixed stock rifles with A1/A2 buffer tube. Carbine fits collapsible M4-type carbine-length buffer tube. 308 Rifle – Fits AR10 and 308 AR fixed stock rifles with an A1/A2 buffer tube. 308 Carbine – fits AR10 and 308 AR carbine buffer tubes. JP Enterprises recommends the use of JP Tuned and Polished 308 Buffer Springs when using the JP 308 Low Mass Bolt Carrier Group
Ekstra kraft for mykere, stillere og mer pålitelig sykling
Presisjonsslipte og polerte driftsfjærer gir en mykere og stillere drift i AR buffer-rør. Forbedret impulsfølelse resulterer i raskere siktegjenoppretting og økt pålitelighet. Ytre diameter er slipt og polert for jevn, stille bevegelse i buffer-røret. Rifle passer faste skjefterifler med A1/A2 buffer-rør. Karabin passer sammenleggbare M4-type karabinlengde buffer-rør. 308 Rifle – Passer AR10 og 308 AR faste skjefterifler med et A1/A2 buffer-rør. 308 Karabin – passer AR10 og 308 AR karabin buffer-rør. JP Enterprises anbefaler bruk av JP Tuned and Polished 308 Buffer Springs ved bruk av JP 308 Low Mass Bolt Carrier Group
Kundevurderinger for J P ENTERPRISES TUNED AND POLISHED BUFFER SPRING, 308 RIFLE
Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 4,9
IT WORKS!(28.04.2017)
Built an AR308 with a standard 308 carbine buffer spring in a Magpul CTR stock. Would only lock back the bolt carrier about 50% of the time after the last round. Installed this spring and now get lock back after the last round 100%. Used a standard 3.7oz buffer both times. Problem solved!
308 Rifle Flat-Wire Buffer Spring(22.03.2014)
I replaced the factory round buffer spring in a new Remington R-25, 7MM-08 with this buffer spring because of multiple feeding and extraction problems. I fired 100 rounds, fast and slow, without any malfunctions what-so-ever.
Excellent Product(20.02.2012)
In Canada, we can buy Norinco AR's. Although well built, the finer points are missed. One of those is final fit/finish/quality on some things. Gun worked great, but adding this, smooth consistent cycling, and the brass all went in the same area. It did minimize the buffer tube noise as well.
No more ringing sound at all - amazing(03.04.2012)
Installed this spring with a tiny bit of grease for lubrication, and it works amazing. Just as promised. Gun feels nice and solid when I shoot it, and I don't feel or hear any of the spring action anymore. I ran this with a spikes heavy buffer.
Nice!(18.11.2013)
I've used this spring in multiple carbine builds and a pistol; both in conjunction with standard, H2 and Spike's T2 buffers. Never had any issue with cycling. A top quality upgrade.
Great part(26.03.2015)
Great product, great price. Highly recommended.
Works well, but short life.(16.07.2018)
Very nice part, but low life expectancy. Did not see anything on JP's site or anyone mention on here, but on the card I got with the spring the recommended replacement is only 5,000 rds. I don't consider my self to shoot much, but 5k rds comes quick and was disappointed to see that after I got it. That said it works very comparably to the flat springs I have and have yet to hear any spring noise when firing.
Great Spring(04.04.2012)
I use this spring with the AR-Restor buffer. It has tamed my .50 Beowulf more than I thought possible!
Great buy(04.02.2014)
Excellent spring, takes alot of the "chung" out of the action. The extra power of this spring really drives the bolt home.
These work(31.01.2016)
Have used these springs in my own rifles, installed in customers rifles, never had a complaint. Just ordered a couple more to have them in stock.
Quiet (24.08.2016)
I have liked shooting AR's, but always hated the "boing" and rattle. When I built my own, I decided to eliminate those noises. Between the Spikes Tactical tungsten buffer and a JP Enterprises tuned spring, the only mechanical noise is from the bolt movement. Pure joy!
Produktnr.: 452000151 J P ENTERPRISES TUNED AND POLISHED BUFFER SPRING, 308 RIFLE Produsentnr.: JPS-OSR.308812872020914 Presisjonsslipte og polerte driftsfjærer gir en mykere og stillere drift i AR buffer-rør. Forbedret impulsfølelse resulterer i raskere siktegjenoppretting og økt pålitelighet. Ytre diameter er slipt og polert for jevn, stille bevegelse i buffer-røret. Rifle passer faste skjefterifler med A1/A2 buffer-rør. Karabin passer sammenleggbare M4-type karabinlengde buffer-rør. 308 Rifle – Passer AR10 og 308 AR faste skjefterifler med et A1/A2 buffer-rør. 308 Karabin – passer AR10 og 308 AR karabin buffer-rør. JP Enterprises anbefaler bruk av JP Tuned and Polished 308 Buffer Springs ved bruk av JP 308 Low Mass Bolt Carrier Group
599NOK0kr 599,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Produktnr.: 452000119 J P ENTERPRISES TUNED BUFFER SPRING, CARBINE Produsentnr.: JPS-OSC812872020921 Presisjonsslipte og polerte driftsfjærer gir en mykere og stillere drift i AR buffer-rør. Forbedret impulsfølelse resulterer i raskere siktegjenoppretting og økt pålitelighet. Ytre diameter er slipt og polert for jevn, stille bevegelse i buffer-røret. Rifle passer faste skjefterifler med A1/A2 buffer-rør. Karabin passer sammenleggbare M4-type karabinlengde buffer-rør. 308 Rifle – Passer AR10 og 308 AR faste skjefterifler med et A1/A2 buffer-rør. 308 Karabin – passer AR10 og 308 AR karabin buffer-rør. JP Enterprises anbefaler bruk av JP Tuned and Polished 308 Buffer Springs ved bruk av JP 308 Low Mass Bolt Carrier Group
549NOK10kr 549,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 452000152 J P ENTERPRISES TUNED AND POLISHED BUFFER SPRING, 308 CARBINE Produsentnr.: JPS-OSC.308812872020938 Presisjonsslipte og polerte driftsfjærer gir en mykere og stillere drift i AR buffer-rør. Forbedret impulsfølelse resulterer i raskere siktegjenoppretting og økt pålitelighet. Ytre diameter er slipt og polert for jevn, stille bevegelse i buffer-røret. Rifle passer faste skjefterifler med A1/A2 buffer-rør. Karabin passer sammenleggbare M4-type karabinlengde buffer-rør. 308 Rifle – Passer AR10 og 308 AR faste skjefterifler med et A1/A2 buffer-rør. 308 Karabin – passer AR10 og 308 AR karabin buffer-rør. JP Enterprises anbefaler bruk av JP Tuned and Polished 308 Buffer Springs ved bruk av JP 308 Low Mass Bolt Carrier Group
599NOK3kr 599,00
*
Leveringstid ca. 14-21 dager. 3 stk. på lageret i USA
Produktnr.: 452000118 J P ENTERPRISES TUNED BUFFER SPRING, RIFLE Produsentnr.: JPS-OSR812872020907 Presisjonsslipte og polerte driftsfjærer gir en mykere og stillere drift i AR buffer-rør. Forbedret impulsfølelse resulterer i raskere siktegjenoppretting og økt pålitelighet. Ytre diameter er slipt og polert for jevn, stille bevegelse i buffer-røret. Rifle passer faste skjefterifler med A1/A2 buffer-rør. Karabin passer sammenleggbare M4-type karabinlengde buffer-rør. 308 Rifle – Passer AR10 og 308 AR faste skjefterifler med et A1/A2 buffer-rør. 308 Karabin – passer AR10 og 308 AR karabin buffer-rør. JP Enterprises anbefaler bruk av JP Tuned and Polished 308 Buffer Springs ved bruk av JP 308 Low Mass Bolt Carrier Group
549NOK0kr 549,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Extra Power For Smoother, Quieter, More Reliable Cycling
Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability. Outer-diameter is ground and polished for smooth, quiet movement in the buffer tube. Rifle fits fixed stock rifles with A1/A2 buffer tube. Carbine fits collapsible M4-type carbine-length buffer tube. 308 Rifle – Fits AR10 and 308 AR fixed stock rifles with an A1/A2 buffer tube. 308 Carbine – fits AR10 and 308 AR carbine buffer tubes. JP Enterprises recommends the use of JP Tuned and Polished 308 Buffer Springs when using the JP 308 Low Mass Bolt Carrier Group
Ekstra kraft for mykere, stillere og mer pålitelig sykling
Presisjonsslipte og polerte driftsfjærer gir en mykere og stillere drift i AR buffer-rør. Forbedret impulsfølelse resulterer i raskere siktegjenoppretting og økt pålitelighet. Ytre diameter er slipt og polert for jevn, stille bevegelse i buffer-røret. Rifle passer faste skjefterifler med A1/A2 buffer-rør. Karabin passer sammenleggbare M4-type karabinlengde buffer-rør. 308 Rifle – Passer AR10 og 308 AR faste skjefterifler med et A1/A2 buffer-rør. 308 Karabin – passer AR10 og 308 AR karabin buffer-rør. JP Enterprises anbefaler bruk av JP Tuned and Polished 308 Buffer Springs ved bruk av JP 308 Low Mass Bolt Carrier Group
Kundevurderinger for J P ENTERPRISES TUNED AND POLISHED BUFFER SPRING, 308 RIFLE
Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 4,9
IT WORKS!(28.04.2017)
Built an AR308 with a standard 308 carbine buffer spring in a Magpul CTR stock. Would only lock back the bolt carrier about 50% of the time after the last round. Installed this spring and now get lock back after the last round 100%. Used a standard 3.7oz buffer both times. Problem solved!
308 Rifle Flat-Wire Buffer Spring(22.03.2014)
I replaced the factory round buffer spring in a new Remington R-25, 7MM-08 with this buffer spring because of multiple feeding and extraction problems. I fired 100 rounds, fast and slow, without any malfunctions what-so-ever.
Excellent Product(20.02.2012)
In Canada, we can buy Norinco AR's. Although well built, the finer points are missed. One of those is final fit/finish/quality on some things. Gun worked great, but adding this, smooth consistent cycling, and the brass all went in the same area. It did minimize the buffer tube noise as well.
No more ringing sound at all - amazing(03.04.2012)
Installed this spring with a tiny bit of grease for lubrication, and it works amazing. Just as promised. Gun feels nice and solid when I shoot it, and I don't feel or hear any of the spring action anymore. I ran this with a spikes heavy buffer.
Nice!(18.11.2013)
I've used this spring in multiple carbine builds and a pistol; both in conjunction with standard, H2 and Spike's T2 buffers. Never had any issue with cycling. A top quality upgrade.
Great part(26.03.2015)
Great product, great price. Highly recommended.
Works well, but short life.(16.07.2018)
Very nice part, but low life expectancy. Did not see anything on JP's site or anyone mention on here, but on the card I got with the spring the recommended replacement is only 5,000 rds. I don't consider my self to shoot much, but 5k rds comes quick and was disappointed to see that after I got it. That said it works very comparably to the flat springs I have and have yet to hear any spring noise when firing.
Great Spring(04.04.2012)
I use this spring with the AR-Restor buffer. It has tamed my .50 Beowulf more than I thought possible!
Great buy(04.02.2014)
Excellent spring, takes alot of the "chung" out of the action. The extra power of this spring really drives the bolt home.
These work(31.01.2016)
Have used these springs in my own rifles, installed in customers rifles, never had a complaint. Just ordered a couple more to have them in stock.
Quiet (24.08.2016)
I have liked shooting AR's, but always hated the "boing" and rattle. When I built my own, I decided to eliminate those noises. Between the Spikes Tactical tungsten buffer and a JP Enterprises tuned spring, the only mechanical noise is from the bolt movement. Pure joy!