Match-Grade Pull From A Rugged, Reliable Drop-In Module
Drop-in trigger module fits any mil-spec small-pin AR-15 and delivers a light, superbly crisp trigger pull right from the box, with no adjustment or fine-tuning. Crisp, 4-lb. pull is safe enough for tactical operations and combat, yet light enough to ensure an ultra-clean break that’s closer to a bolt action than a typical tactical rifle. Exceptionally short, positive reset gets you back on target and ready to take the next shot almost instantly. Unique hammer geometry keeps weight to a minimum for ultra-fast lock time, yet provides plenty of kick to ensure reliable ignition, even on hard military primers. A secondary “rescue” sear grabs the hammer if the primary sear fails when the weapon is dropped or severely jarred—meets military specifications for drop safety. CNC-machined, hardened tool steel hammer, sear, and trigger body with precision-ground contact surfaces are built to run hard in competition or combat, all contained in the rugged machined aluminum housing. TR-TTU - Single-stage pull has zero take-up and an ultra-clean break. TR-TTU-M2 - “Semi” two-stage, match-grade trigger has an abbreviated initial stage that establishes sear engagement for safe, reliable operation in high-stress tactical environments, followed by a clean second-stage release. TR-TTU-3G- Wilson Combat engineers have enhanced the TTU-3G trigger with a smooth, rolling, creep-free 3.5-4# break that is ideal for shooting rapid double-taps on the move from your high-performance AR-15. The 3.5# - 4# pound pull breaks with the extreme smoothness of finely tuned target-pistol trigger and has tactile feedback that gives a shooter the confidence to prep the trigger face during quick target transitions. The TTU-3G also has an enhanced, lightning-fast trigger reset that will make fast follow up shots a breeze and eliminate "trigger freeze" during the heat of competition or tactical shooting.
SPECS: Trigger/Hammer/Sear – Hardened tool steel, matte gray finish. Housing – Aluminum, anodized, matte black. Fits AR-15 with .154” trigger and hammer pins. Includes two .154” pins and installation instructions.
Mer...
Match-Grade Avtrekk Fra En Robust, Pålitelig Drop-In Modul
Drop-in avtrekkermodul passer enhver mil-spec små-pin AR-15 og leverer en lett, eksepsjonelt skarp avtrekksfølelse rett fra esken, uten justering eller fininnstilling. Skarp, 4-lb. avtrekk er sikkert nok for taktiske operasjoner og kamp, men lett nok til å sikre en ultra-ren brudd som er nærmere en boltrifle enn et typisk taktisk gevær. Eksepsjonelt kort, positiv tilbakestilling får deg tilbake på målet og klar til å ta det neste skuddet nesten umiddelbart. Unik hammergeometri holder vekten til et minimum for ultra-rask låsetid, men gir nok kraft til å sikre pålitelig tenning, selv på harde militære tennhetter. En sekundær «redning» sikring griper hammeren hvis den primære sikringen svikter når våpenet er sluppet eller kraftig rystet – møter militære spesifikasjoner for fallsikkerhet. CNC-maskinert, herdet verktøy stål hammer, sikring og avtrekkerkropp med presisjonsslipte kontaktoverflater er bygget for å tåle hard bruk i konkurranse eller kamp, alt inneholdt i det robuste maskinerte aluminiumshuset. TR-TTU - En-trinns avtrekk har null forspill og en ultra-ren brudd. TR-TTU-M2 - «Semi» to-trinns, match-grad avtrekker har en forkortet første fase som etablerer sikringsengasjement for sikker, pålitelig drift i høy-stress taktiske miljøer, etterfulgt av en ren andre-fase utløsning. TR-TTU-3G- Wilson Combat ingeniører har forbedret TTU-3G avtrekkeren med en glatt, rullende, krypfri 3.5-4# brudd som er ideell for å skyte raske dobbelt-tap på farten fra din høy-ytelse AR-15. 3.5# - 4# pund avtrekk bryter med den ekstreme glattheten av finjustert konkurransepistol avtrekker og har taktile tilbakemeldinger som gir en skytter tilliten til å forberede avtrekkerflaten under raske mål overganger. TTU-3G har også en forbedret, lynrask avtrekker tilbakestilling som vil gjøre raske oppfølgingsskudd en bris og eliminere "avtrekker frys" under varmen av konkurranse eller taktisk skyting.
SPECS: Avtrekker/Hammer/Sikring – Herdet verktøy stål, matt grå finish. Hus – Aluminium, anodisert, matt svart. Passer AR-15 med .154” avtrekker- og hammerstifter. Inkluderer to .154” stifter og installasjonsinstruksjoner.
Mer...
Kundevurderinger for WILSON COMBAT TR-TTU TACTICAL TRIGGER UNIT
Antall vurderinger: 19
Fra brownells.com: 19
Gjennomsnittsvurdering: 4,1
As Good as a Geissele :)(21.11.2014)
Had mine installed 5 months ago and This Is 1 of my favorite short resetting triggers w/ a pull weight around 3.5 lbs, its Is a Very controllable trigger compared to the Geissele Super 3 Gun which always gave me an uneasy feeling I might bump fire it! I have used this trigger for bench and even semi long range shots and I am Always Still Able to control the trigger and in Rapid Fire this trigger Kicks Butt! Only trigger that Might be better is the New Rapid Fire trigger by Geissele which Im buying for my next AR!!!
Simply the finest trigger out there!(17.04.2017)
WAS a big Ge...... fan until they flip flopped on their warranty
using their triggers in the Sig MCX/MPX(all over the forums). Youtube is full of Ge....... videos but not many for the Wilson. The break of this trigger is absolutely unbelievable. The build quality is impeccable as well. Worth every penny. Try one and you will want to replace all your triggers with this one!
Ok, But has some problems(16.10.2011)
Drop in fit and finish is great. The weight of pull is good for many uses. The trigger has fast locktime and is easy to shoot quick.
Thats where the good ends and the bad starts. The trigger has a real bad habbit of doubling if you let off slow. As soon as the main sear engages on let off the weight of the pull drasticly drops to around 2-3Lbs. If your used to the 5ish lbs and let off slow it will fire unexpectidly.
This trigger is marketed for LEO/MIL roles offering a improved trigger pull over most stock triggers. In the process of this they missed the mark.
To be fair this may be more of a argument back to a two stage trigger. I am going to try the Geissele SSA
Good Defensive Pull Weight, Solid Break(30.11.2016)
Removed the stock Colt M4 trigger group and installed this WC self contained trigger unit, MIL version. Installation was almost too easy to install and took around three minutes.
It is a solid unit in hand and there are no loose parts in this group; everything is solid and put together nicely.
The pull weight advertised is from 5 1/2-5 3/4 lbs. I would say this is correct, as it is slightly less then the stock Colt # of 7+ lbs.
What makes this trigger exceptional is the clean break of the single stage pull. It will take a few rounds of getting used to the break, however, once it is established, you will know exactly where it is at. I found no creep whatsoever in this single stage.
This is an exceptional trigger group, geared toward LE/Military/Defensive rolls. I would not consider this a target trigger, as you will need to apply deliberate pressure for the release. However, for what this group is geared to, it is an exceptional trigger build with a very crisp break and solid, audible, quick reset. You will mean to pull the trigger when it goes off.
If defensive rolls are what you are using your rifle for, although expensive, you should consider this trigger group for its build quality and characteristics.
Hands Down, the best by far I've tried(22.08.2011)
Switched all my Timney triggers with this. Not to brag but I was able to perform 15 shots in 2.11 sec. Soft and Crisp. I wish they would trim down the trigger a little bit. I'd like the trigger lever width to be in-between the one it has now and the AR Gold Trigger. But still, super excellent trigger.
Outstanding(11.05.2013)
Have this trigger in my Colt LE6920 and used it for a recent .308 AR build. Short smooth takeup, super light and crisp break. It's fantastic to shoot with and is probably the best trigger I've ever tried. Install is as easy as it gets.
Love this trigger!(20.11.2009)
True 5 minute installation and absolutely crisp break with fast reset and zero creep or crunchiness.
Easy to Install, Confidence Inspiring...(09.01.2010)
The WC trigger was a snap to install....and I'm not that mechanically inclined. It has a very crisp break, very positive reset, and smacks primers HARD. Whats not to love......I'll buy another.
Completely Satisfied(23.04.2010)
A snap to install, no creep, breaks like a glass rod. A bit pricey, but the quality and lack of required fitting make this unit worth every penny.
unsure(08.08.2010)
Easy install. Unfortunately, I seem to have gotten a dud, as the trigger will not reset without some "help"...... disappointing...
Simple easy install & I love it!!(13.08.2010)
I have been shooting my AR for several years with several extras added and didnt think the trigger was an issue. WOW! Was I wrong! This trigger was easy to install and the crisp, clean pull is unbelievable! The pull is smother than many of my custom pistols. You would be foolish not to want this tactical trigger!
Great Carbine Upgrade(30.11.2010)
Trigger was installed in a Bushmaster with little to no effort, the difference is night and day. Incredibly smooth break and much more fluid than the factory trigger. I highly recommend this item and am anticipating installing another one in a new carbine very soon. Excellent product.
Sweeeeeeet Trigger(13.01.2011)
Breaks clean,crisp. Big improvement from standard Bushmaster trigger. Installed literally in minutes, tests as per instructions flawless. Positive primer strike. Wilson has always made top quality parts and the price...well worth it.
Super Crisp and Consistent AR Trigger(25.03.2011)
This is by far the best AR trigger I've ever used. I've installed many AR15 stock mil-spec triggers, from Lower Parts kits; DMPS, Rock River Arms, Bushmaster, etc.. This installs very easily and is worlds different from what any stock trigger can do, even if it were polished up and re-springed. Wilson Combat has a reputation for quality, and this part is no different. It works as advertised, and I just bought my second unit this morning for another AR15 Build. I have three AR15's and wish I had my third with this unit. They are pricey. But if you are on the fence about it. You will NOT be disappointed once this is installed.
Follow up to previous review(05.05.2011)
I sent the original trigger back to Wilson and they sent a new trigger. This one seems to work fine. I would rate 5 star but want to see if any long term problems develop. The pull(feel) of the trigger is excellent. Very easy to install.
Lock up Problem(29.05.2011)
Trigger is very clean and easy to install. Problem is the hammer doesn't always lock into place. This is not a problem you can aford to have in a gun you trust your life to.
Crisp break free trigger.(28.09.2011)
After seeing some of the reviews I really put this trigger though some rough use. I went through smooth, slow firing to jerky, as fast as I could pull, bump firing, and then back to slow firing. I tried to get this trigger to misfire to include violent slam fire and could not get it to misfire at all. Always positive lock and fire.
Could be better(13.10.2012)
WOW !!! That Brownells service is OUTSTANDING,I ordered the trigger late Thursday and had it in the gun Saturday before noon. Only 5 minutes to install, I think Wilson did a good job on this trigger, pull seems a little heavy for my liking,No creep clean break a tad over travel but all in all 100% better than the stock Sig M400 8# and more creep than a barn full of Zombies. the intended use... By the way home defence including critters... And some tactical shooting.
Very expensive, and poor operation(30.03.2014)
Thought I would try one and I was very disappointed the holes for the anti rotation pins very hard to line up. Even when the triggers hammer is not cocked back you can put the safety on, than charge the weapon and the reset on the trigger does not work correctly. I will stick to CMC triggers from now on.
Produktnr.: 965000071 WILSON COMBAT TR-TTU TACTICAL TRIGGER UNIT Produsentnr.: TR-TTU874218005054 Drop-in avtrekkermodul passer enhver mil-spec små-pin AR-15 og leverer en lett, eksepsjonelt skarp avtrekksfølelse rett fra esken, uten justering eller fininnstilling. Skarp, 4-lb. avtrekk er sikkert nok for taktiske operasjoner og kamp, men lett nok til å sikre en ultra-ren brudd som er nærmere en boltrifle enn et typisk taktisk gevær. Eksepsjonelt kort, positiv tilbakestilling får deg tilbake på målet og klar til å ta det neste skuddet nesten umiddelbart. Unik hammergeometri holder vekten til et minimum for ultra-rask låsetid, men gir nok kraft til å sikre pålitelig tenning, selv på harde militære tennhetter. En sekundær «redning» sikring griper hammeren hvis den primære sikringen svikter når våpenet er sluppet eller kraftig rystet – møter militære spesifikasjoner for fallsikkerhet. CNC-maskinert, herdet verktøy stål hammer, sikring og avtrekkerkropp med presisjonsslipte kontaktoverflater er bygget for å tåle hard bruk i konkurranse eller kamp, alt inneholdt i det robuste maskinerte aluminiumshuset. TR-TTU - En-trinns avtrekk har null forspill og en ultra-ren brudd. TR-TTU-M2 - «Semi» to-trinns, match-grad avtrekker har en forkortet første fase som etablerer sikringsengasjement for sikker, pålitelig drift i høy-stress taktiske miljøer, etterfulgt av en ren andre-fase utløsning. TR-TTU-3G- Wilson Combat ingeniører har forbedret TTU-3G avtrekkeren med en glatt, rullende, krypfri 3.5-4# brudd som er ideell for å skyte raske dobbelt-tap på farten fra din høy-ytelse AR-15. 3.5# - 4# pund avtrekk bryter med den ekstreme glattheten av finjustert konkurransepistol avtrekker og har taktile tilbakemeldinger som gir en skytter tilliten til å forberede avtrekkerflaten under raske mål overganger. TTU-3G har også en forbedret, lynrask avtrekker tilbakestilling som vil gjøre raske oppfølgingsskudd en bris og eliminere "avtrekker frys" under varmen av konkurranse eller taktisk skyting.
3899NOK5kr 3 899,00
*
Leveringstid ca. 14-21 dager. 5 stk. på lageret i USA
Spesifikasjoner:Make: AR .308, AR-15Style: Match Grade
Drop-in avtrekkermodul som passer enhver mil-spec små-pin AR-15, med lett 4-lb. avtrekk og ultra-ren brudd, ideell for både taktiske operasjoner og kamp.
Unik hammergeometri og sekundær «redning» sikring sikrer pålitelig tenning og møter militære spesifikasjoner for fallsikkerhet.
Tilgjengelig i tre varianter: en-trinns TR-TTU, semi to-trinns TR-TTU-M2, og TTU-3G med glatt, krypfri 3.5-4# brudd for raske oppfølgingsskudd.
Attributes
Make:
AR .308,AR-15
Style:
Match Grade
Leveringsvekt: 0,113kgFrakthøyde: 33mmFraktbredde: 84mmFraktlengde: 168mm
UPC
: 874218005054
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 965000088 WILSON COMBAT TR-TTU-M2 TACTICAL TRIGGER UNIT Produsentnr.: TR-TTU-M2874218005146 Drop-in avtrekkermodul passer enhver mil-spec små-pin AR-15 og leverer en lett, eksepsjonelt skarp avtrekksfølelse rett fra esken, uten justering eller fininnstilling. Skarp, 4-lb. avtrekk er sikkert nok for taktiske operasjoner og kamp, men lett nok til å sikre en ultra-ren brudd som er nærmere en boltrifle enn et typisk taktisk gevær. Eksepsjonelt kort, positiv tilbakestilling får deg tilbake på målet og klar til å ta det neste skuddet nesten umiddelbart. Unik hammergeometri holder vekten til et minimum for ultra-rask låsetid, men gir nok kraft til å sikre pålitelig tenning, selv på harde militære tennhetter. En sekundær «redning» sikring griper hammeren hvis den primære sikringen svikter når våpenet er sluppet eller kraftig rystet – møter militære spesifikasjoner for fallsikkerhet. CNC-maskinert, herdet verktøy stål hammer, sikring og avtrekkerkropp med presisjonsslipte kontaktoverflater er bygget for å tåle hard bruk i konkurranse eller kamp, alt inneholdt i det robuste maskinerte aluminiumshuset. TR-TTU - En-trinns avtrekk har null forspill og en ultra-ren brudd. TR-TTU-M2 - «Semi» to-trinns, match-grad avtrekker har en forkortet første fase som etablerer sikringsengasjement for sikker, pålitelig drift i høy-stress taktiske miljøer, etterfulgt av en ren andre-fase utløsning. TR-TTU-3G- Wilson Combat ingeniører har forbedret TTU-3G avtrekkeren med en glatt, rullende, krypfri 3.5-4# brudd som er ideell for å skyte raske dobbelt-tap på farten fra din høy-ytelse AR-15. 3.5# - 4# pund avtrekk bryter med den ekstreme glattheten av finjustert konkurransepistol avtrekker og har taktile tilbakemeldinger som gir en skytter tilliten til å forberede avtrekkerflaten under raske mål overganger. TTU-3G har også en forbedret, lynrask avtrekker tilbakestilling som vil gjøre raske oppfølgingsskudd en bris og eliminere "avtrekker frys" under varmen av konkurranse eller taktisk skyting.
3899NOK2kr 3 899,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Spesifikasjoner:Make: AR .308, AR-15Style: Match Grade
Drop-in avtrekkermodul som passer enhver mil-spec små-pin AR-15, med en lett, eksepsjonelt skarp avtrekksfølelse uten behov for justering.
TR-TTU-M2 er en «Semi» to-trinns avtrekker med en forkortet første fase og en ren andre-fase utløsning, ideell for høy-stress taktiske miljøer.
Bygget med CNC-maskinert, herdet verktøy stål og anodisert aluminium, for å tåle hard bruk i konkurranse eller kamp.
Attributes
Make:
AR .308,AR-15
Style:
Match Grade
Leveringsvekt: 0,091kgFrakthøyde: 36mmFraktbredde: 84mmFraktlengde: 168mm
UPC
: 874218005146
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 965000179 WILSON COMBAT TR-TTU-3G TACTICAL TRIGGER UNIT 3 GUN Produsentnr.: TR-TTU-3G874218006532 Drop-in avtrekkermodul passer enhver mil-spec små-pin AR-15 og leverer en lett, eksepsjonelt skarp avtrekksfølelse rett fra esken, uten justering eller fininnstilling. Skarp, 4-lb. avtrekk er sikkert nok for taktiske operasjoner og kamp, men lett nok til å sikre en ultra-ren brudd som er nærmere en boltrifle enn et typisk taktisk gevær. Eksepsjonelt kort, positiv tilbakestilling får deg tilbake på målet og klar til å ta det neste skuddet nesten umiddelbart. Unik hammergeometri holder vekten til et minimum for ultra-rask låsetid, men gir nok kraft til å sikre pålitelig tenning, selv på harde militære tennhetter. En sekundær «redning» sikring griper hammeren hvis den primære sikringen svikter når våpenet er sluppet eller kraftig rystet – møter militære spesifikasjoner for fallsikkerhet. CNC-maskinert, herdet verktøy stål hammer, sikring og avtrekkerkropp med presisjonsslipte kontaktoverflater er bygget for å tåle hard bruk i konkurranse eller kamp, alt inneholdt i det robuste maskinerte aluminiumshuset. TR-TTU - En-trinns avtrekk har null forspill og en ultra-ren brudd. TR-TTU-M2 - «Semi» to-trinns, match-grad avtrekker har en forkortet første fase som etablerer sikringsengasjement for sikker, pålitelig drift i høy-stress taktiske miljøer, etterfulgt av en ren andre-fase utløsning. TR-TTU-3G- Wilson Combat ingeniører har forbedret TTU-3G avtrekkeren med en glatt, rullende, krypfri 3.5-4# brudd som er ideell for å skyte raske dobbelt-tap på farten fra din høy-ytelse AR-15. 3.5# - 4# pund avtrekk bryter med den ekstreme glattheten av finjustert konkurransepistol avtrekker og har taktile tilbakemeldinger som gir en skytter tilliten til å forberede avtrekkerflaten under raske mål overganger. TTU-3G har også en forbedret, lynrask avtrekker tilbakestilling som vil gjøre raske oppfølgingsskudd en bris og eliminere "avtrekker frys" under varmen av konkurranse eller taktisk skyting.
3899NOK1kr 3 899,00
*
Leveringstid ca. 14-21 dager. 1 stk. på lageret i USA
Spesifikasjoner:Make: AR .308, AR-15Style: Match Grade
Drop-in avtrekkermodul for AR-15 som gir en lett, skarp avtrekksfølelse uten behov for justering.
En-trinns og semi to-trinns alternativer med ultra-ren brudd og rask tilbakestilling, ideell for konkurranse og taktisk skyting.
Bygget med herdet verktøy stål og anodisert aluminium for pålitelighet og holdbarhet i høy-stress miljøer.
Attributes
Make:
AR .308,AR-15
Style:
Match Grade
Leveringsvekt: 0,068kgFrakthøyde: 36mmFraktbredde: 84mmFraktlengde: 168mm
UPC
: 874218006532
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Oppgrader din AR-15 med Wilson Combat TR-TTU avtrekkeren! ⚙️ Nyt en lett, skarp avtrekksfølelse uten justering. Perfekt for taktiske operasjoner.
Match-Grade Pull From A Rugged, Reliable Drop-In Module
Drop-in trigger module fits any mil-spec small-pin AR-15 and delivers a light, superbly crisp trigger pull right from the box, with no adjustment or fine-tuning. Crisp, 4-lb. pull is safe enough for tactical operations and combat, yet light enough to ensure an ultra-clean break that’s closer to a bolt action than a typical tactical rifle. Exceptionally short, positive reset gets you back on target and ready to take the next shot almost instantly. Unique hammer geometry keeps weight to a minimum for ultra-fast lock time, yet provides plenty of kick to ensure reliable ignition, even on hard military primers. A secondary “rescue” sear grabs the hammer if the primary sear fails when the weapon is dropped or severely jarred—meets military specifications for drop safety. CNC-machined, hardened tool steel hammer, sear, and trigger body with precision-ground contact surfaces are built to run hard in competition or combat, all contained in the rugged machined aluminum housing. TR-TTU - Single-stage pull has zero take-up and an ultra-clean break. TR-TTU-M2 - “Semi” two-stage, match-grade trigger has an abbreviated initial stage that establishes sear engagement for safe, reliable operation in high-stress tactical environments, followed by a clean second-stage release. TR-TTU-3G- Wilson Combat engineers have enhanced the TTU-3G trigger with a smooth, rolling, creep-free 3.5-4# break that is ideal for shooting rapid double-taps on the move from your high-performance AR-15. The 3.5# - 4# pound pull breaks with the extreme smoothness of finely tuned target-pistol trigger and has tactile feedback that gives a shooter the confidence to prep the trigger face during quick target transitions. The TTU-3G also has an enhanced, lightning-fast trigger reset that will make fast follow up shots a breeze and eliminate "trigger freeze" during the heat of competition or tactical shooting.
SPECS: Trigger/Hammer/Sear – Hardened tool steel, matte gray finish. Housing – Aluminum, anodized, matte black. Fits AR-15 with .154” trigger and hammer pins. Includes two .154” pins and installation instructions.
Mer...
Match-Grade Avtrekk Fra En Robust, Pålitelig Drop-In Modul
Drop-in avtrekkermodul passer enhver mil-spec små-pin AR-15 og leverer en lett, eksepsjonelt skarp avtrekksfølelse rett fra esken, uten justering eller fininnstilling. Skarp, 4-lb. avtrekk er sikkert nok for taktiske operasjoner og kamp, men lett nok til å sikre en ultra-ren brudd som er nærmere en boltrifle enn et typisk taktisk gevær. Eksepsjonelt kort, positiv tilbakestilling får deg tilbake på målet og klar til å ta det neste skuddet nesten umiddelbart. Unik hammergeometri holder vekten til et minimum for ultra-rask låsetid, men gir nok kraft til å sikre pålitelig tenning, selv på harde militære tennhetter. En sekundær «redning» sikring griper hammeren hvis den primære sikringen svikter når våpenet er sluppet eller kraftig rystet – møter militære spesifikasjoner for fallsikkerhet. CNC-maskinert, herdet verktøy stål hammer, sikring og avtrekkerkropp med presisjonsslipte kontaktoverflater er bygget for å tåle hard bruk i konkurranse eller kamp, alt inneholdt i det robuste maskinerte aluminiumshuset. TR-TTU - En-trinns avtrekk har null forspill og en ultra-ren brudd. TR-TTU-M2 - «Semi» to-trinns, match-grad avtrekker har en forkortet første fase som etablerer sikringsengasjement for sikker, pålitelig drift i høy-stress taktiske miljøer, etterfulgt av en ren andre-fase utløsning. TR-TTU-3G- Wilson Combat ingeniører har forbedret TTU-3G avtrekkeren med en glatt, rullende, krypfri 3.5-4# brudd som er ideell for å skyte raske dobbelt-tap på farten fra din høy-ytelse AR-15. 3.5# - 4# pund avtrekk bryter med den ekstreme glattheten av finjustert konkurransepistol avtrekker og har taktile tilbakemeldinger som gir en skytter tilliten til å forberede avtrekkerflaten under raske mål overganger. TTU-3G har også en forbedret, lynrask avtrekker tilbakestilling som vil gjøre raske oppfølgingsskudd en bris og eliminere "avtrekker frys" under varmen av konkurranse eller taktisk skyting.
SPECS: Avtrekker/Hammer/Sikring – Herdet verktøy stål, matt grå finish. Hus – Aluminium, anodisert, matt svart. Passer AR-15 med .154” avtrekker- og hammerstifter. Inkluderer to .154” stifter og installasjonsinstruksjoner.
Mer...
Kundevurderinger for WILSON COMBAT TR-TTU TACTICAL TRIGGER UNIT
Antall vurderinger: 19
Fra brownells.com: 19
Gjennomsnittsvurdering: 4,1
As Good as a Geissele :)(21.11.2014)
Had mine installed 5 months ago and This Is 1 of my favorite short resetting triggers w/ a pull weight around 3.5 lbs, its Is a Very controllable trigger compared to the Geissele Super 3 Gun which always gave me an uneasy feeling I might bump fire it! I have used this trigger for bench and even semi long range shots and I am Always Still Able to control the trigger and in Rapid Fire this trigger Kicks Butt! Only trigger that Might be better is the New Rapid Fire trigger by Geissele which Im buying for my next AR!!!
Simply the finest trigger out there!(17.04.2017)
WAS a big Ge...... fan until they flip flopped on their warranty
using their triggers in the Sig MCX/MPX(all over the forums). Youtube is full of Ge....... videos but not many for the Wilson. The break of this trigger is absolutely unbelievable. The build quality is impeccable as well. Worth every penny. Try one and you will want to replace all your triggers with this one!
Ok, But has some problems(16.10.2011)
Drop in fit and finish is great. The weight of pull is good for many uses. The trigger has fast locktime and is easy to shoot quick.
Thats where the good ends and the bad starts. The trigger has a real bad habbit of doubling if you let off slow. As soon as the main sear engages on let off the weight of the pull drasticly drops to around 2-3Lbs. If your used to the 5ish lbs and let off slow it will fire unexpectidly.
This trigger is marketed for LEO/MIL roles offering a improved trigger pull over most stock triggers. In the process of this they missed the mark.
To be fair this may be more of a argument back to a two stage trigger. I am going to try the Geissele SSA
Good Defensive Pull Weight, Solid Break(30.11.2016)
Removed the stock Colt M4 trigger group and installed this WC self contained trigger unit, MIL version. Installation was almost too easy to install and took around three minutes.
It is a solid unit in hand and there are no loose parts in this group; everything is solid and put together nicely.
The pull weight advertised is from 5 1/2-5 3/4 lbs. I would say this is correct, as it is slightly less then the stock Colt # of 7+ lbs.
What makes this trigger exceptional is the clean break of the single stage pull. It will take a few rounds of getting used to the break, however, once it is established, you will know exactly where it is at. I found no creep whatsoever in this single stage.
This is an exceptional trigger group, geared toward LE/Military/Defensive rolls. I would not consider this a target trigger, as you will need to apply deliberate pressure for the release. However, for what this group is geared to, it is an exceptional trigger build with a very crisp break and solid, audible, quick reset. You will mean to pull the trigger when it goes off.
If defensive rolls are what you are using your rifle for, although expensive, you should consider this trigger group for its build quality and characteristics.
Hands Down, the best by far I've tried(22.08.2011)
Switched all my Timney triggers with this. Not to brag but I was able to perform 15 shots in 2.11 sec. Soft and Crisp. I wish they would trim down the trigger a little bit. I'd like the trigger lever width to be in-between the one it has now and the AR Gold Trigger. But still, super excellent trigger.
Outstanding(11.05.2013)
Have this trigger in my Colt LE6920 and used it for a recent .308 AR build. Short smooth takeup, super light and crisp break. It's fantastic to shoot with and is probably the best trigger I've ever tried. Install is as easy as it gets.
Love this trigger!(20.11.2009)
True 5 minute installation and absolutely crisp break with fast reset and zero creep or crunchiness.
Easy to Install, Confidence Inspiring...(09.01.2010)
The WC trigger was a snap to install....and I'm not that mechanically inclined. It has a very crisp break, very positive reset, and smacks primers HARD. Whats not to love......I'll buy another.
Completely Satisfied(23.04.2010)
A snap to install, no creep, breaks like a glass rod. A bit pricey, but the quality and lack of required fitting make this unit worth every penny.
unsure(08.08.2010)
Easy install. Unfortunately, I seem to have gotten a dud, as the trigger will not reset without some "help"...... disappointing...
Simple easy install & I love it!!(13.08.2010)
I have been shooting my AR for several years with several extras added and didnt think the trigger was an issue. WOW! Was I wrong! This trigger was easy to install and the crisp, clean pull is unbelievable! The pull is smother than many of my custom pistols. You would be foolish not to want this tactical trigger!
Great Carbine Upgrade(30.11.2010)
Trigger was installed in a Bushmaster with little to no effort, the difference is night and day. Incredibly smooth break and much more fluid than the factory trigger. I highly recommend this item and am anticipating installing another one in a new carbine very soon. Excellent product.
Sweeeeeeet Trigger(13.01.2011)
Breaks clean,crisp. Big improvement from standard Bushmaster trigger. Installed literally in minutes, tests as per instructions flawless. Positive primer strike. Wilson has always made top quality parts and the price...well worth it.
Super Crisp and Consistent AR Trigger(25.03.2011)
This is by far the best AR trigger I've ever used. I've installed many AR15 stock mil-spec triggers, from Lower Parts kits; DMPS, Rock River Arms, Bushmaster, etc.. This installs very easily and is worlds different from what any stock trigger can do, even if it were polished up and re-springed. Wilson Combat has a reputation for quality, and this part is no different. It works as advertised, and I just bought my second unit this morning for another AR15 Build. I have three AR15's and wish I had my third with this unit. They are pricey. But if you are on the fence about it. You will NOT be disappointed once this is installed.
Follow up to previous review(05.05.2011)
I sent the original trigger back to Wilson and they sent a new trigger. This one seems to work fine. I would rate 5 star but want to see if any long term problems develop. The pull(feel) of the trigger is excellent. Very easy to install.
Lock up Problem(29.05.2011)
Trigger is very clean and easy to install. Problem is the hammer doesn't always lock into place. This is not a problem you can aford to have in a gun you trust your life to.
Crisp break free trigger.(28.09.2011)
After seeing some of the reviews I really put this trigger though some rough use. I went through smooth, slow firing to jerky, as fast as I could pull, bump firing, and then back to slow firing. I tried to get this trigger to misfire to include violent slam fire and could not get it to misfire at all. Always positive lock and fire.
Could be better(13.10.2012)
WOW !!! That Brownells service is OUTSTANDING,I ordered the trigger late Thursday and had it in the gun Saturday before noon. Only 5 minutes to install, I think Wilson did a good job on this trigger, pull seems a little heavy for my liking,No creep clean break a tad over travel but all in all 100% better than the stock Sig M400 8# and more creep than a barn full of Zombies. the intended use... By the way home defence including critters... And some tactical shooting.
Very expensive, and poor operation(30.03.2014)
Thought I would try one and I was very disappointed the holes for the anti rotation pins very hard to line up. Even when the triggers hammer is not cocked back you can put the safety on, than charge the weapon and the reset on the trigger does not work correctly. I will stick to CMC triggers from now on.