Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

DOUBLE STAR
AR-15/M16 SLING ADAPTER END PLATE

841348100454 100004532

Increases Sling-Attachment Versatility On Collapsible-Stock Rifles & Carbines

Machined steel replacement for the factory receiver plate gives an AR fitted with an M4-type collapsible buttstock a convenient, low-profile attachment point for clip-on, single-point slings. Precision machined from 1018 carbon steel for superior strength and an exact fit, with a durable manganese phosphate Parkerized finish that resists surface abrasion and corrosion, and matches the finish on mil-spec anodized receivers. Available in single-loop Right-Hand (RH) as well as a convenient, versatile Ambidextrous configuration that lets you swap the sling from one side of the receiver to the other. An adapter that is designated as a right hand (RH) adapter is for right handed shooters and will be mounted on the left side of the gun. Photos are of viewing the sling adapter from the rear.

SPECS: 1018 steel, Parkerized, matte black finish. Fits AR-15/M16/M4 and clones fitted with M4-style collapsible buttstock.

Mer...

Øker Versatiliteten for Slyngefeste På Rifler & Karabiner Med Sammenleggbar Kolbe

Maskinert stål erstatning for fabrikkens mottakerplate gir en AR utstyrt med en M4-type sammenleggbar kolbe et praktisk, lavprofil festepunkt for klips-on, enkeltpunkts slynger. Presisjonsmaskinert fra 1018 karbonstål for overlegen styrke og en eksakt passform, med en slitesterk manganfosfat Parkerisert finish som motstår overflateabrasjon og korrosjon, og matcher finishen på mil-spec anodiserte mottakere. Tilgjengelig i enkelt-løkke Høyre-Hand (RH) samt en praktisk, allsidig Ambidextrous konfigurasjon som lar deg bytte slyngen fra den ene siden av mottakeren til den andre. En adapter som er betegnet som en høyre hand (RH) adapter er for høyrehendte skyttere og vil bli montert på venstre side av våpenet. Bildene viser slyngeadapteren fra baksiden.

SPECS: 1018 stål, Parkerisert, matt svart finish. Passer til AR-15/M16/M4 og kloner utstyrt med M4-stil sammenleggbar kolbe.

Mer...

Kundevurderinger for DOUBLE STAR AMBIDEXTROUS SLING ADAPTER PLATE

Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 3,4

Solid (18.03.2010)

Purchased two Right hand sets to complete Aero Precision lowers. They are thicker than standard receiver plates and seem like a nice addition for a single point sling set up. The lower sections and loop are a bit too "squared" and don't fully compliment its attachment to lower receiver.Just a small disappointment to an otherwise solid product at a great price.

Good product (04.02.2011)

Recently purchased 50 of these to outfit department's new Patrol Rifles. With the exception of two, they fit the mil-spec diameter buffer tubes. The remaining two only required minor adjustment of the indexing stud with a file. They do their job at an excellent price.

Worth every penny (19.04.2011)

Own 6 AR15s now, and have customized literally HUNDREDS of them for friends. ANY of them with colapsable stocks get this modification. for a few bucks, why NOT, add to it a inexpensive single point sling and your ready to go, wether its hunting, competative shooting, or just for the comfort of carry. Im sold on them !!

Flawless Install (25.10.2011)

Just installed this on my TROY MOD 1 M14/M1A build. Installs flawlessly and is really sturdy!

Great Product (06.11.2011)

Works great with the 1 1/4" HK-Style Sling Snap Hook (product 080-000-797). Solid and silent. It's all you need for the right price!

Cheap for a reason (24.12.2011)

Cheap steel. the single point sling i have dug into the steel of the end plate easily no matter how it was configured. Don't buy, you will just have to buy another one.

Poor fit for a mil-spec Armalite tube (08.06.2012)

I tried to fit this end plate on the mil-spec tube that came with my Armalite rifle, but it would not fit over the threads.

Okay (11.05.2013)

It works for single point slings HK style hooks real well. It looks to be cheaply made, and unfortunately I had to file it a bit to get it to fit on my buffer tube alignment notch. I tried 3 different tubes I had and it wouldn't slip over and align with the notch on the tubes until I filed it only just a little bit. It does not fit with certain pistol grips like the Magpul MIAD or others that have the bit that extends over the lower receiver.

works on pistol buffer tube (12.03.2016)

i needed an ambi single pt adapter for an AR pistol buffer tube setup. no one talks about fit for the pistol buffer tubes. this worked like a champ with minor modification - filling down the notch - which coincidentally makes the notch look like receiver plate that came with the pistol setup. the steel is soft enough that a hand file was sufficient to the task in a matter of minutes; so it may not last, but the price was good and it appears to working for now. i am buying more for other builds. it does not get in the way of the charging handle or forward assist.

Functional at a good price (26.06.2017)

I purchased this item for a carbine rifle build. The item is constructed well and fits nicely. It came packed with no instructions on how to install, which for me was not a problem, but someone who does not know what they are doing it might pose an issue. I am a certified AR-15 / M-16 Armorer and I am the police department armorer I use a single point sling on my rifle and this item will be utilized and works well for my law enforcement job.

Not Good is too high of a rating (22.11.2010)

I installed 150 of these on our departments rifles. Within 45 days the slings had wore through the sling mount and we had rifles falling to the floor. 1018 steel is too weak. Do not buy this product.

Les 11 flere anmeldelser fra brownells.com

289 339 2 NOK

Produktnr.: 100004532
DOUBLE STAR AMBIDEXTROUS SLING ADAPTER PLATE
Produsentnr.: JT345 841348100454 Maskinert stål erstatning for fabrikkens mottakerplate gir en AR utstyrt med en M4-type sammenleggbar kolbe et praktisk, lavprofil festepunkt for klips-on, enkeltpunkts slynger. Presisjonsmaskinert fra 1018 karbonstål for overlegen styrke og en eksakt passform, med en slitesterk manganfosfat Parkerisert finish som motstår overflateabrasjon og korrosjon, og matcher finishen på mil-spec anodiserte mottakere. Tilgjengelig i enkelt-løkke Høyre-Hand (RH) samt en praktisk, allsidig Ambidextrous konfigurasjon som lar deg bytte slyngen fra den ene siden av mottakeren til den andre. En adapter som er betegnet som en høyre hand (RH) adapter er for høyrehendte skyttere og vil bli montert på venstre side av våpenet. Bildene viser slyngeadapteren fra baksiden.

289 NOK 26 kr 289,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Farge: Black Material: Steel Style: Rifle Sling Adapter

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Maskinert stål erstatning for fabrikkens mottakerplate gir en AR med M4-type sammenleggbar kolbe et lavprofil festepunkt for enkeltpunkts slynger.
Presisjonsmaskinert fra 1018 karbonstål med slitesterk manganfosfat Parkerisert finish som motstår abrasjon og korrosjon.
Tilgjengelig i enkelt-løkke Høyre-Hand (RH) og ambidextrous konfigurasjon for fleksibel bruk.

Attributes

Farge: Black Material: Steel Style: Rifle Sling Adapter Leveringsvekt: 0,039kg Frakthøyde: 2mm Fraktbredde: 108mm Fraktlengde: 146mm UPC : 841348100454

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Produktnr.: 100004533
DOUBLE STAR RH SLING ADAPTER PLATE
Produsentnr.: JT345R 841348100478 Maskinert stål erstatning for fabrikkens mottakerplate gir en AR utstyrt med en M4-type sammenleggbar kolbe et praktisk, lavprofil festepunkt for klips-on, enkeltpunkts slynger. Presisjonsmaskinert fra 1018 karbonstål for overlegen styrke og en eksakt passform, med en slitesterk manganfosfat Parkerisert finish som motstår overflateabrasjon og korrosjon, og matcher finishen på mil-spec anodiserte mottakere. Tilgjengelig i enkelt-løkke Høyre-Hand (RH) samt en praktisk, allsidig Ambidextrous konfigurasjon som lar deg bytte slyngen fra den ene siden av mottakeren til den andre. En adapter som er betegnet som en høyre hand (RH) adapter er for høyrehendte skyttere og vil bli montert på venstre side av våpenet. Bildene viser slyngeadapteren fra baksiden.

339 NOK 1 kr 339,00 *

Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA

Spesifikasjoner: Farge: Black Material: Steel Style: Rifle Sling Adapter

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppgrader AR-15 med vår ambidextrous sling adapter plate! 💪 Slitesterk, presisjonsmaskinert stål for optimal ytelse og enkel montering.

Increases Sling-Attachment Versatility On Collapsible-Stock Rifles & Carbines

SPECS: 1018 steel, Parkerized, matte black finish. Fits AR-15/M16/M4 and clones fitted with M4-style collapsible buttstock.

Mer...

Øker Versatiliteten for Slyngefeste På Rifler & Karabiner Med Sammenleggbar Kolbe

SPECS: 1018 stål, Parkerisert, matt svart finish. Passer til AR-15/M16/M4 og kloner utstyrt med M4-stil sammenleggbar kolbe.

Mer...

Kundevurderinger for DOUBLE STAR AMBIDEXTROUS SLING ADAPTER PLATE

Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 3,4

Solid (18.03.2010)

Good product (04.02.2011)

Worth every penny (19.04.2011)

Flawless Install (25.10.2011)

Just installed this on my TROY MOD 1 M14/M1A build. Installs flawlessly and is really sturdy!

Great Product (06.11.2011)

Works great with the 1 1/4" HK-Style Sling Snap Hook (product 080-000-797). Solid and silent. It's all you need for the right price!

Cheap for a reason (24.12.2011)

Cheap steel. the single point sling i have dug into the steel of the end plate easily no matter how it was configured. Don't buy, you will just have to buy another one.

Poor fit for a mil-spec Armalite tube (08.06.2012)

I tried to fit this end plate on the mil-spec tube that came with my Armalite rifle, but it would not fit over the threads.

Okay (11.05.2013)

works on pistol buffer tube (12.03.2016)

Functional at a good price (26.06.2017)

Not Good is too high of a rating (22.11.2010)

I installed 150 of these on our departments rifles. Within 45 days the slings had wore through the sling mount and we had rifles falling to the floor. 1018 steel is too weak. Do not buy this product.

Les 11 flere anmeldelser fra brownells.com