Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

BROWNELLS
AR-15/M16 HANDGUARD ALIGNMENT TOOL

050806005990 080000368

Maintains Precise Handguard Alignment While Tightening The Locking Ring

Eyeballing a railed, free-float handguard for perfect alignment with your flattop receiver is only half the battle. Keeping it from going cockeyed as you tighten the locking ring is another story. Talk about frustrating! Avoid the hassle with this handy jig that aligns the top handguard rail with the receiver rail and keeps it there. Just slide the jig on the rails, secure its setscrews, and tighten the locking ring you re done! With the time it saves, this tool will pay for itself the first few times you use it. A must for maintaining handguard alignment to ensure night vision devices, vertical grips, flip-up front sights, and other add-on accessories are also properly aligned. Precision machined from high-quality 6061 billet aluminum, then hardcoat anodized for extra strength and years of wear resistance. Designed for use with railed, free-float tubes that have a locking ring.

SPECS: Aluminum, hardcoat anodized, black. 3½" (8.9cm) long, 1" (2.5cm) wide, 1½" (3.8cm) high.

Mer...

Opprettholder Nøyaktig Justering av Håndbeskyttelse Mens Låseringen Strammes

Å justere en skinnemontert, fritt svevende håndbeskyttelse for perfekt justering med din flattop-mottaker er bare halve kampen. Å holde den fra å bli skjev mens du strammer låseringen er en annen historie. Snakk om frustrerende! Unngå bryet med denne hendige malen som justerer toppskinne på håndbeskyttelsen med mottakerskinnen og holder den der. Bare skyv malen på skinnene, sikre dens sett skruer, og stram låseringen - du er ferdig! Med tiden det sparer, vil dette verktøyet betale for seg selv de første gangene du bruker det. Et must for å opprettholde justeringen av håndbeskyttelsen for å sikre at nattsynsinnretninger, vertikale grep, flip-up frontsikter og andre tilleggsutstyr også er riktig justert. Presisjonsmaskinert fra høykvalitets 6061 billet aluminium, deretter hardcoat anodisert for ekstra styrke og årevis med motstand mot slitasje. Designet for bruk med skinnemonterte, fritt svevende rør som har en låsering.

SPECS: Aluminium, hardcoat anodisert, sort. 3½" (8,9 cm) lang, 1" (2,5 cm) bred, 1½" (3,8 cm) høy.

Mer...

Kundevurderinger for BROWNELLS HANDGUARD ALIGNMENT TOOL

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 2,1

Super Easy To Use (30.06.2009)

Does exactly what they claim. It makes getting your rail perfectly aligned with your flattop receiver a breeze. If you're going to invest [$] in a top of the line rail system it just makes good sense to make sure it's lined up As close to perfectly as humanly possible.Just be careful. Mine had a slight burr that would have scratched the finish if I hadn't caught it.

May be good for some, not others. (24.11.2010)

Found that this tool does not do a good job for screw on free float tubes such as thoses made by DPMS or Yankee Hill (Ones that screw onto a barrel nut that is provided with the tube.) Simply put, it does help line up the rails; however you will not be able to exert enough torque on the jam nut to securely hold the tube. Found out that I had to remove the tool and use a strap wrench and eyeball it as I had always done. It may help with the free float tubes that clamp onto the standard barrel retaining nuts; however, many of these index with the teeth on the nut. If they are not positioned exactly center of the rail when the barrel is installed, the tube will be off as well. Perhaps it was not designed for it, but it does not work on most free float tubes I have experence with. It may work if you are attempting to install a picatinny rail section to a standard round free float tube or some other custom application.

Well Worth The Money (03.02.2012)

I used this tool to install a YHM handguard and completed the job in less than ten minutes. It sure beats trying to keep everything aligned with a ruler while tightening the jam nut.

Hit and miss (03.04.2013)

This product does work - HOWEVER; The design requires that the tool be "slid" down the rail to get it into position and is VERY tight on most rails I've used it with. This COULD cause scratches or marring - nothing that will affect proper function of the completed system but if it's a customers' rifle or one you don't want to scratch/mar, then you'll end up not using this and line up the rails without it.... If both sections were bolt-on instead.... Just sayin'

Worthless (25.09.2014)

The tool that received does not fit on the rails at all. The fit was so tight, all it did was end up scratching up the rails. I finally gave up trying to make it fit. Worthless.

Poor Choice (16.01.2017)

Well, I normally would not have purchased this because of the reviews, but I figured âwhy notâ try it. Now that I have tried it, itâs nothing more than an expensive paperweight. It doesnât work on any handguard or receiver I own. It will damage your finish because itâs toooo tight. It was a nice thought to have two adjustment screws on the larger block, but they serve no useful purpose. Would recommend, if Brownells desires, to at least enable the two adjustment screws to be able to tighten around the rails. Overall, just a mistake and would not recommend to anyone.

It will damage upper. (05.05.2017)

Nice idea, but needs serious redesign. Does not fit all rails. Can scar and/or scrape surfaces.

Les 7 flere anmeldelser fra brownells.com

1099 1099 1 NOK

Produktnr.: 080000368
BROWNELLS HANDGUARD ALIGNMENT TOOL 050806005990 Å justere en skinnemontert, fritt svevende håndbeskyttelse for perfekt justering med din flattop-mottaker er bare halve kampen. Å holde den fra å bli skjev mens du strammer låseringen er en annen historie. Snakk om frustrerende! Unngå bryet med denne hendige malen som justerer toppskinne på håndbeskyttelsen med mottakerskinnen og holder den der. Bare skyv malen på skinnene, sikre dens sett skruer, og stram låseringen - du er ferdig! Med tiden det sparer, vil dette verktøyet betale for seg selv de første gangene du bruker det. Et must for å opprettholde justeringen av håndbeskyttelsen for å sikre at nattsynsinnretninger, vertikale grep, flip-up frontsikter og andre tilleggsutstyr også er riktig justert. Presisjonsmaskinert fra høykvalitets 6061 billet aluminium, deretter hardcoat anodisert for ekstra styrke og årevis med motstand mot slitasje. Designet for bruk med skinnemonterte, fritt svevende rør som har en låsering.

1099 NOK 0 kr 1 099,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Dette verktøyet sikrer perfekt justering av håndbeskyttelsen med flattop-mottakeren og forhindrer skjevhet under stramming av låseringen.
Presisjonsmaskinert fra høykvalitets 6061 billet aluminium og hardcoat anodisert for ekstra styrke og langvarig motstand mot slitasje.
Designet for bruk med skinnemonterte, fritt svevende rør, og er essensielt for korrekt justering av nattsynsinnretninger, vertikale grep og andre tilleggsutstyr.

Attributes

Make: AR-15 Leveringsvekt: 0,249kg Frakthøyde: 58mm Fraktbredde: 61mm Fraktlengde: 122mm UPC : 050806005990

Elementdetaljer

Made in USA

Optimaliser justeringen av håndbeskyttelsen din med AR-15 håndbeskyttelsesverktøy fra BROWNELLS. 💪 Presis, holdbar og enkel å bruke!

Maintains Precise Handguard Alignment While Tightening The Locking Ring

SPECS: Aluminum, hardcoat anodized, black. 3½" (8.9cm) long, 1" (2.5cm) wide, 1½" (3.8cm) high.

Mer...

Opprettholder Nøyaktig Justering av Håndbeskyttelse Mens Låseringen Strammes

SPECS: Aluminium, hardcoat anodisert, sort. 3½" (8,9 cm) lang, 1" (2,5 cm) bred, 1½" (3,8 cm) høy.

Mer...

Kundevurderinger for BROWNELLS HANDGUARD ALIGNMENT TOOL

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 2,1

Super Easy To Use (30.06.2009)

May be good for some, not others. (24.11.2010)

Well Worth The Money (03.02.2012)

I used this tool to install a YHM handguard and completed the job in less than ten minutes. It sure beats trying to keep everything aligned with a ruler while tightening the jam nut.

Hit and miss (03.04.2013)

Worthless (25.09.2014)

The tool that received does not fit on the rails at all. The fit was so tight, all it did was end up scratching up the rails. I finally gave up trying to make it fit. Worthless.

Poor Choice (16.01.2017)

It will damage upper. (05.05.2017)

Nice idea, but needs serious redesign. Does not fit all rails. Can scar and/or scrape surfaces.

Les 7 flere anmeldelser fra brownells.com

BROWNELLS
AR-15/M16 HANDGUARD ALIGNMENT TOOL

Kundevurderinger for BROWNELLS HANDGUARD ALIGNMENT TOOL

Top takeaways

Attributes

Elementdetaljer

Kundevurderinger for BROWNELLS HANDGUARD ALIGNMENT TOOL

Koble til

Sikre betalingsmåter

Bransjeorganisasjoner

Velkommen!

BROWNELLS AR-15/M16 HANDGUARD ALIGNMENT TOOL

Kundevurderinger for BROWNELLS HANDGUARD ALIGNMENT TOOL

Top takeaways

Attributes

Elementdetaljer

Kundevurderinger for BROWNELLS HANDGUARD ALIGNMENT TOOL

Koble til

Sikre betalingsmåter

Bransjeorganisasjoner

Velkommen!

BROWNELLS
AR-15/M16 HANDGUARD ALIGNMENT TOOL