Put the zing back into the rifle you thought was past its prime. Manufactured to precise tolerances, these high quality, replacement springs help keep your AR-15 functioning properly. Great for emergency spares or for assembling a parts rifle. Available singly, or in 3-paks.
SPECS: Materials and finish at least equal to OEM parts. Chrome silicon springs indicated by (CS).
Mer...
Gi nytt liv til riflen du trodde var over sin storhetstid. Produsert med presise toleranser, hjelper disse høykvalitets, erstatningsfjærene med å holde din AR-15 i riktig funksjon. Flotte for nødreserver eller for å sette sammen en deler-rifle. Tilgjengelig enkeltvis, eller i 3-pakker.
SPECS: Materialer og finish minst like gode som OEM-deler. Fjærer i krom-silisium er indikert med (CS).
Mer...
Kundevurderinger for BROWNELLS AR-15 EXTRACTOR SPRING (CS)
Antall vurderinger: 2
Fra brownells.com: 2
Gjennomsnittsvurdering: 5
Great value(07.09.2012)
These are made to the original M16 rifle specification and are not of the newer "heavy coil" designs. Use these with a mil-spec viton O-ring and a black spring insert for maximum life and reliability. You can also use a Defender D-ring instead of the O-ring.
If used with the insert and the O-ring, these can be used to the same effect as the newer "XP" extractor springs. CS is great for very high temperature tolerance.
Excellent quality. Excellent value(19.11.2012)
This spring is made to the original M16 rifle size specification and is not of the newer "heavy coil" XP-designs. However, these are Chrome Silicon steel, which is perfect for use in the hgih temp, high stress bolt assembly. Regular spring steel can have its temper/strength affected as low as a few hundred degrees Fahrenheit. CS steel can maintain its strength up to ~800 degrees with no damage to its temper. This spring will also outlast your original extractor spring by an order of magnitude. Use this spring with a mil-spec viton O-ring and a black spring insert for maximum life and reliability. You can also use a Defender D-ring instead of the O-ring.
If used with the insert and the O-ring, this spring can be used to the same effect as the newer "XP" extractor springs. This spring is a great value. An even greater value in the 3-pack. I hand these out as Christmas gifts to friends. Nothing says "Merry Christmas" like "I hope you stay alive in a gunfight." ;)
Produktnr.: 078101125 BROWNELLS AR-15 EXTRACTOR SPRING (CS)050806004689 Gi nytt liv til riflen du trodde var over sin storhetstid. Produsert med presise toleranser, hjelper disse høykvalitets, erstatningsfjærene med å holde din AR-15 i riktig funksjon. Flotte for nødreserver eller for å sette sammen en deler-rifle. Tilgjengelig enkeltvis, eller i 3-pakker.
249NOK3kr 249,00
*
Leveringstid ca. 14-21 dager. 3 stk. på lageret i USA
Produktnr.: 078000086 BROWNELLS AR-15 EXTRACTOR SPRING 3 PACK050806003378 Gi nytt liv til riflen du trodde var over sin storhetstid. Produsert med presise toleranser, hjelper disse høykvalitets, erstatningsfjærene med å holde din AR-15 i riktig funksjon. Flotte for nødreserver eller for å sette sammen en deler-rifle. Tilgjengelig enkeltvis, eller i 3-pakker.
319NOK34kr 319,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 078000104 BROWNELLS AR-15 EXTRACTOR SPRING (CS) 3 PACK050806003507 Gi nytt liv til riflen du trodde var over sin storhetstid. Produsert med presise toleranser, hjelper disse høykvalitets, erstatningsfjærene med å holde din AR-15 i riktig funksjon. Flotte for nødreserver eller for å sette sammen en deler-rifle. Tilgjengelig enkeltvis, eller i 3-pakker.
299NOK17kr 299,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Put the zing back into the rifle you thought was past its prime. Manufactured to precise tolerances, these high quality, replacement springs help keep your AR-15 functioning properly. Great for emergency spares or for assembling a parts rifle. Available singly, or in 3-paks.
SPECS: Materials and finish at least equal to OEM parts. Chrome silicon springs indicated by (CS).
Mer...
Gi nytt liv til riflen du trodde var over sin storhetstid. Produsert med presise toleranser, hjelper disse høykvalitets, erstatningsfjærene med å holde din AR-15 i riktig funksjon. Flotte for nødreserver eller for å sette sammen en deler-rifle. Tilgjengelig enkeltvis, eller i 3-pakker.
SPECS: Materialer og finish minst like gode som OEM-deler. Fjærer i krom-silisium er indikert med (CS).
Mer...
Kundevurderinger for BROWNELLS AR-15 EXTRACTOR SPRING (CS)
Antall vurderinger: 2
Fra brownells.com: 2
Gjennomsnittsvurdering: 5
Great value(07.09.2012)
These are made to the original M16 rifle specification and are not of the newer "heavy coil" designs. Use these with a mil-spec viton O-ring and a black spring insert for maximum life and reliability. You can also use a Defender D-ring instead of the O-ring.
If used with the insert and the O-ring, these can be used to the same effect as the newer "XP" extractor springs. CS is great for very high temperature tolerance.
Excellent quality. Excellent value(19.11.2012)
This spring is made to the original M16 rifle size specification and is not of the newer "heavy coil" XP-designs. However, these are Chrome Silicon steel, which is perfect for use in the hgih temp, high stress bolt assembly. Regular spring steel can have its temper/strength affected as low as a few hundred degrees Fahrenheit. CS steel can maintain its strength up to ~800 degrees with no damage to its temper. This spring will also outlast your original extractor spring by an order of magnitude. Use this spring with a mil-spec viton O-ring and a black spring insert for maximum life and reliability. You can also use a Defender D-ring instead of the O-ring.
If used with the insert and the O-ring, this spring can be used to the same effect as the newer "XP" extractor springs. This spring is a great value. An even greater value in the 3-pack. I hand these out as Christmas gifts to friends. Nothing says "Merry Christmas" like "I hope you stay alive in a gunfight." ;)