Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

TANGODOWN
PICATINNY STANDARD VERTICAL GRIP

855727000303 071000038

Tough, Combat-Tested Grips With Built-In Utility Features

Quick-release, dual locking bars provide a rock-solid mounting interface to Mil-Std 1913 rails. Large diameter, ribbed grip helps prevent hand fatigue and cramping during long periods in the ready position. Oversized storage compartment is large enough for spare batteries or parts, including a complete M4/M16 bolt assembly. O-ring on cap forms a waterproof seal down to 66 ft. deep. Remove side filler panel to mount a light/laser remote pressure switch in the integral switch pocket.

SPECS: Resin polymer, black or dark earth. 4¾" (12.1cm) long.

Mer...

Robuste, kamp-testede grep med innebygde nyttefunksjoner

Hurtigutløsende, doble låsestenger gir et steinhardt monteringsgrensesnitt til Mil-Std 1913 skinner. Stor diameter, riflet grep hjelper med å forhindre håndtretthet og kramper under lange perioder i beredskapsposisjon. Overdimensjonert oppbevaringsrom er stort nok for ekstra batterier eller deler, inkludert en komplett M4/M16 boltsamling. O-ring på lokket danner en vanntett forsegling ned til 20 meter dypt. Fjern sidefyllingspanelet for å montere en lys/laser fjerntrykksbryter i det integrerte bryterlommen.

SPECS: Resinharpolymer, svart eller mørk jord. 4¾" (12.1cm) lang.

Mer...

Kundevurderinger for TANGODOWN PICATINNY STANDARD VERTICAL GRIP POLYMER DARK EARTH

Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 3,7

"Too much whiz and not enough bang" (16.01.2010)

Def. not a bang for my [$], doesnt benefit from spring locks and when I called the company they said might be my rail, "not really" I mount all different kinds of forend grips no prob, I think the spring lock design is the problem. Def gonna use my 30 dollar polymer grip over this one, rock solid with that one.

Good product, but tough to put on (25.01.2010)

I recently purchased the BGV-MK46 battle grip and put it on my patrol rifle. So far it has been great other than the fact it was quite difficult to install, but once I got it in place there is absolutely no movement. It is in fact rock solid. Might have gone with the quick release model instead for ease of installing / removal and its ability to adjust to different sized rails if you're not sure if your rails are Mil-Std 1913 or not.

awesome grip (02.02.2010)

This grip is solid, very nicely made. It is somewhat difficult to get on but definitely doable by yourself, and to get it off by yourself is really difficult in all honesty. Flimsy? No freaking way!!!!!!!!! If you're looking to mount it and leave it, this is great. If for some odd reason you want to take it on and off, get the qd model.

Solid but bulky (18.08.2010)

This grip can be tough to install unless you use the zipties to hold down the locking bars. Once on, it is very sturdy and could take a beating. It is however one of the larger grips on the market and hangs down quite low. The switch pocket will only fit older style surefire switches so make sure your switch will fit. Overall feels nice, but may be a little overkill for an AR15, and the limited switch fitment is frustrating.

dont like it (02.08.2012)

thing is huge and very wobbly once mounted. oh its solid and rugged but it has a ton of play on the rail. do not like the mounting system at all

Rock solid grip; worth every penny (20.01.2016)

After reading some of the mixed reviews,I was questioning whether or not I wanted to buy this grip. I took a chance and can't be happier with the grip. Well made and was able to install by myself onto a 4" section of Samson Evolution Rail. Tango Down also now provides "grip chips" to help in pulling down the tabs while installing the grip. Once mounted, the locking tabs popped into the rail grooves and I had ZERO movement or wiggle on my rail. Anyone that has Samson rails and was curious about this grip; it has a very snug fit.

Les 6 flere anmeldelser fra brownells.com

1849 1899 2 NOK

Produktnr.: 071000038
TANGODOWN PICATINNY STANDARD VERTICAL GRIP POLYMER DARK EARTH
Produsentnr.: BGV-MK46 FDE 855727000303 Hurtigutløsende, doble låsestenger gir et steinhardt monteringsgrensesnitt til Mil-Std 1913 skinner. Stor diameter, riflet grep hjelper med å forhindre håndtretthet og kramper under lange perioder i beredskapsposisjon. Overdimensjonert oppbevaringsrom er stort nok for ekstra batterier eller deler, inkludert en komplett M4/M16 boltsamling. O-ring på lokket danner en vanntett forsegling ned til 20 meter dypt. Fjern sidefyllingspanelet for å montere en lys/laser fjerntrykksbryter i det integrerte bryterlommen.

1899 NOK 9 kr 1 899,00 *

Leveringstid ca. 14-21 dager.
9 stk. på lageret i USA

Spesifikasjoner: Attachment: Picatinny Farge: Dark Earth Make: AR-15 Material: Polymer

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Hurtigutløsende, doble låsestenger gir et steinhardt monteringsgrensesnitt til Mil-Std 1913 skinner.
Overdimensjonert oppbevaringsrom stort nok for ekstra batterier eller deler, inkludert en komplett M4/M16 boltsamling.
O-ring på lokket danner en vanntett forsegling ned til 20 meter dypt.

Attributes

Attachment: Picatinny Farge: Dark Earth Make: AR-15 Material: Polymer Leveringsvekt: 0,136kg Frakthøyde: 51mm Fraktbredde: 145mm Fraktlengde: 201mm UPC : 855727000303

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.y.1

Produktnr.: 071000034
TANGODOWN PICATINNY STANDARD VERTICAL GRIP POLYMER BLACK
Produsentnr.: BGV-MK46 BLK 855727000129 Hurtigutløsende, doble låsestenger gir et steinhardt monteringsgrensesnitt til Mil-Std 1913 skinner. Stor diameter, riflet grep hjelper med å forhindre håndtretthet og kramper under lange perioder i beredskapsposisjon. Overdimensjonert oppbevaringsrom er stort nok for ekstra batterier eller deler, inkludert en komplett M4/M16 boltsamling. O-ring på lokket danner en vanntett forsegling ned til 20 meter dypt. Fjern sidefyllingspanelet for å montere en lys/laser fjerntrykksbryter i det integrerte bryterlommen.

1849 NOK 8 kr 1 849,00 *

Leveringstid ca. 14-21 dager.
8 stk. på lageret i USA

Spesifikasjoner: Attachment: Picatinny Farge: Black Make: AR-15 Material: Polymer

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Hurtigutløsende, doble låsestenger gir et steinhardt monteringsgrensesnitt til Mil-Std 1913 skinner.
Stor diameter, riflet grep hjelper med å forhindre håndtretthet og kramper under lange perioder i beredskapsposisjon.
Overdimensjonert oppbevaringsrom stort nok for ekstra batterier eller deler, inkludert en komplett M4/M16 boltsamling, med vanntett forsegling ned til 20 meter dypt.

Attributes

Attachment: Picatinny Farge: Black Make: AR-15 Material: Polymer Leveringsvekt: 0,068kg Frakthøyde: 10mm Fraktbredde: 145mm Fraktlengde: 201mm UPC : 855727000129