Molded rubber covers snap over exposed portions of accessory rails to form a positive gripping surface for a comfortable, non-slip hand hold and improved weapon control. Protects your hands from the exposed rail edges and provides a soft cushion to help prevent damage to the rails during storage or transport. Low-profile, flexible guard snaps neatly into the cross-slots on Picatinny rails.
SPECS: Synthetic rubber polymer, black or O.D. green. 6-7⁄8" (17.5cm) long x 1” (2.5cm) wide.
Støpte gummideksler som klikkes på over eksponerte deler av tilbehørsskinner for å danne en positiv gripeflate for et komfortabelt, sklisikkert håndtak og forbedret våpenkontroll. Beskytter hendene dine fra de eksponerte kantene på skinnene og gir en myk pute som hjelper med å forhindre skader på skinnene under lagring eller transport. Lavprofil, fleksibel beskyttelse som klikkes pent inn i tverrslissene på Picatinny-skinner.
SPECS: Syntetisk gummipolymer, svart eller O.D. grønn. 6-7⁄8" (17,5cm) lang x 1” (2,5cm) bred.
Mer...
Kundevurderinger for ERGO GRIPS LOWPRO RAIL GUARD PICATINNY POLYMER BLACK 6"
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 4,7
Not Bad(18.12.2010)
Fit perfectly, and looks great as a two tone on the black and is a camo kinda too boot. only thing i did not like is that these are a harder plastic than others and the jury is still out on whether that is good or bad , a little more slippery than the rubbery ones but they do not stick or drag on your clothing either? Happy hunting....
Good rail cover(07.03.2010)
I wanted a cover that will hopefully keep my rail float tube the same diameter as a M4 rail with the knight's armament covers on it so it will fit in the same mount. These go on very easily and don't move at all. I have to use something to pry it up with. Once I get it started then I can peel it up, so I know it's not going anywhere. These are also surprising at how smooth they make the rail system, it really does smooth it out like the hard covers but with a much lower profile. My only complaint is the cost, it is after all a piece of rubber, can't you sell it for under $5? Or an assortment that would cover mid-length rails for $20?
The Best Rail Guard on the Market!(27.07.2010)
These Rail Guards are fantastic. They fit really tight to the rail and clip on nice. They will not fall off, get ripped off, or snagged. You can trim them easy. They are well made and a quality item. You can grip your weapon up front by wraping your hand around like it was a normal forend without the rails diggin into your hands. I have been back three times to purchase more for all my rails. I am replacing GTC covers on my other weapons with these rail guards.
Best Designed Rail Guards(20.08.2010)
These are the best designed rail guards on the market. They stay in place, don't snag on clothing or brush and end up on the ground or lost like the shorter products. Best of all, they don't add significantly to the diameter of the hand-guards, an extra plus if you have shorter fingers or are wear cold weather gloves. Another great feature is being able to easily trim them to size to accommodate accessories already in place.
Awesome(12.09.2011)
These ladder rail covers are low profile, easy to cut, simple to install and remove, and comfortable.
Perfect!
Perfect fit to keep rails in shape.(25.01.2012)
I bought these to cover the unused portions of picatinny rail on my Walther G22. They fit great, provide protection, & look factory. Nicely made & finished. Not some cheap plastic part! I may purchase more for my other guns...
Produktnr.: 573000028 ERGO GRIPS LOWPRO RAIL GUARD PICATINNY POLYMER BLACK 6" Produsentnr.: 4373BLK874748007467 Støpte gummideksler som klikkes på over eksponerte deler av tilbehørsskinner for å danne en positiv gripeflate for et komfortabelt, sklisikkert håndtak og forbedret våpenkontroll. Beskytter hendene dine fra de eksponerte kantene på skinnene og gir en myk pute som hjelper med å forhindre skader på skinnene under lagring eller transport. Lavprofil, fleksibel beskyttelse som klikkes pent inn i tverrslissene på Picatinny-skinner.
269NOK19kr 269,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Lavprofil gummideksel som klikkes på Picatinny-skinner for komfortabelt, sklisikkert grep og forbedret våpenkontroll.
Beskytter hendene mot eksponerte kanter og forhindrer skader på skinnene under lagring eller transport.
Laget av syntetisk gummipolymer, tilgjengelig i svart eller O.D. grønn, med en lengde på 6-7⁄8" (17,5cm) og bredde på 1” (2,5cm).
Attributes
Farge:
Black
Length:
6 in
Make:
AR-15
Material:
Polymer
Style:
Picatinny
Leveringsvekt: 0,014kgFrakthøyde: 5mmFraktbredde: 58mmFraktlengde: 224mm
UPC
: 874748007467
Elementdetaljer
Made in USA
Produktnr.: 573000029 ERGO GRIPS LOWPRO RAIL GUARD PICATINNY POLYMER O.D. GREEN 6" Produsentnr.: 4373GRN874748007504 Støpte gummideksler som klikkes på over eksponerte deler av tilbehørsskinner for å danne en positiv gripeflate for et komfortabelt, sklisikkert håndtak og forbedret våpenkontroll. Beskytter hendene dine fra de eksponerte kantene på skinnene og gir en myk pute som hjelper med å forhindre skader på skinnene under lagring eller transport. Lavprofil, fleksibel beskyttelse som klikkes pent inn i tverrslissene på Picatinny-skinner.
269NOK22kr 269,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Molded rubber covers snap over exposed portions of accessory rails to form a positive gripping surface for a comfortable, non-slip hand hold and improved weapon control. Protects your hands from the exposed rail edges and provides a soft cushion to help prevent damage to the rails during storage or transport. Low-profile, flexible guard snaps neatly into the cross-slots on Picatinny rails.
SPECS: Synthetic rubber polymer, black or O.D. green. 6-7⁄8" (17.5cm) long x 1” (2.5cm) wide.
Støpte gummideksler som klikkes på over eksponerte deler av tilbehørsskinner for å danne en positiv gripeflate for et komfortabelt, sklisikkert håndtak og forbedret våpenkontroll. Beskytter hendene dine fra de eksponerte kantene på skinnene og gir en myk pute som hjelper med å forhindre skader på skinnene under lagring eller transport. Lavprofil, fleksibel beskyttelse som klikkes pent inn i tverrslissene på Picatinny-skinner.
SPECS: Syntetisk gummipolymer, svart eller O.D. grønn. 6-7⁄8" (17,5cm) lang x 1” (2,5cm) bred.
Mer...
Kundevurderinger for ERGO GRIPS LOWPRO RAIL GUARD PICATINNY POLYMER BLACK 6"
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 4,7
Not Bad(18.12.2010)
Fit perfectly, and looks great as a two tone on the black and is a camo kinda too boot. only thing i did not like is that these are a harder plastic than others and the jury is still out on whether that is good or bad , a little more slippery than the rubbery ones but they do not stick or drag on your clothing either? Happy hunting....
Good rail cover(07.03.2010)
I wanted a cover that will hopefully keep my rail float tube the same diameter as a M4 rail with the knight's armament covers on it so it will fit in the same mount. These go on very easily and don't move at all. I have to use something to pry it up with. Once I get it started then I can peel it up, so I know it's not going anywhere. These are also surprising at how smooth they make the rail system, it really does smooth it out like the hard covers but with a much lower profile. My only complaint is the cost, it is after all a piece of rubber, can't you sell it for under $5? Or an assortment that would cover mid-length rails for $20?
The Best Rail Guard on the Market!(27.07.2010)
These Rail Guards are fantastic. They fit really tight to the rail and clip on nice. They will not fall off, get ripped off, or snagged. You can trim them easy. They are well made and a quality item. You can grip your weapon up front by wraping your hand around like it was a normal forend without the rails diggin into your hands. I have been back three times to purchase more for all my rails. I am replacing GTC covers on my other weapons with these rail guards.
Best Designed Rail Guards(20.08.2010)
These are the best designed rail guards on the market. They stay in place, don't snag on clothing or brush and end up on the ground or lost like the shorter products. Best of all, they don't add significantly to the diameter of the hand-guards, an extra plus if you have shorter fingers or are wear cold weather gloves. Another great feature is being able to easily trim them to size to accommodate accessories already in place.
Awesome(12.09.2011)
These ladder rail covers are low profile, easy to cut, simple to install and remove, and comfortable.
Perfect!
Perfect fit to keep rails in shape.(25.01.2012)
I bought these to cover the unused portions of picatinny rail on my Walther G22. They fit great, provide protection, & look factory. Nicely made & finished. Not some cheap plastic part! I may purchase more for my other guns...