M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto M-LOK compatible systems. These M-LOK Covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function. The contact surfaces on these covers are textured using the Magpul TSP texture for additional grip, adding slightly more than 1/8” from the mounting surface, these covers also feature a beveled contour to minimize potential snagging. The locking tab is pre-scored down the center to allow the user to snap off sections and mix and match colors for a more custom look. Includes six panels. Each covering one M-LOK slot.
SPECS: Fits- M-LOK Handguards.
Mer...
M-LOK Type 2 Rail Covers er lavprofilerte, todelte deksler som monteres direkte på M-LOK kompatible systemer. Disse M-LOK-dekslene er ikke orienteringsspesifikke, noe som gjør at brukeren kan montere dem i hvilken som helst retning uten å påvirke funksjonen. Kontaktoverflatene på disse dekslene er teksturert med Magpul TSP-tekstur for ekstra grep, og legger til litt mer enn 1/8 tomme fra monteringsoverflaten. Dekslene har også en avrundet kontur for å minimere potensiell hekting. Låsefanen er forhåndspreget ned langs midten for å tillate brukeren å knekke av seksjoner og blande og matche farger for et mer personlig utseende. Inkluderer seks paneler. Hver dekker ett M-LOK spor.
SPECS: Passer til- M-LOK Håndbeskyttere.
Mer...
Kundevurderinger for MAGPUL RAIL COVER TYPE 2 M-LOK POLYMER 1.5" FOR AR-15 FDE 6/PACK
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 5
Light, durable, enhanced grip!(22.09.2018)
These look great, don't add much weight, and do add a lot of nice grip surface area on your M-Lok handguard. Overall very inexpensive and item adds a lot to the rifle. Well worth the cost and minimal time to install.
Magpul Shines(03.10.2016)
I use these in conjunction with the M-Lock hand stop to help protect against heat. They work great.
Must-Have for Metal Handguards(04.10.2016)
These are proving indispensable for a metal rail. Not only do they wedge securely into position (a weakness of the pop-in Type 1), but their relative thickness and tendency to suspend your hand between rows of them (instead of letting skin settle between them and contact metal) makes for excellent heat protection. Their studded texture is likely to be a little sharp for some hands, but it really lends traction, and the flat center gives the hand a good surface to rest against. Realize that these bear little resemblance to the broad, curvy, even slippery XTM Picatinny panel - they're trim and rough, perfect for modern rails. They also couldn't be easier to install, and removal is pretty painless. And if you buy them in different colors, the bases and centers can be mixed and matched in various patterns, either for camouflage or just for flair. All told, I couldn't recommend them more.
Surprised and extremely pleased (15.07.2017)
I ordered these somewhat hesitantly because the older pic-rail covers from Magpul are substandard in my experience. These are excellent, however. Extremely secure and very grippy. There is absolutely no movement and nothing loose about these when installed. I like the feel of the rubbery type m-lok covers, but none that I've tried seat properly and stay that way. An added bonus of these type 2 covers is the slight overhang of the panel creates a perfect spot to retain any tape switches for lights and lasers in the gap between the 12:00 rail and the 9:00 cover panel.
Its like non skid(11.08.2017)
The texture on these covers remind me of non skid, very grippy. If you ever been on a ship, you'll know what I'm talking about. I ordered these to give my rail a little more thickness and added ruggedness as well. Once you snap these in place they can be a pain to remove so make sure you know where you want them on your rail. The center inserts fit very tight (I had to use my rubber mallet to tap these into place), you can easily brake the insert if you're trying to remove them if you're not careful. These are very affordable as you get 6 covers for 12 bucks. I think that is a more then fair price for these and of course its Magpul so you know its quality.
Items snap into unused M-LOK slots on your handguard and add color + semi-aggressive grip texture. They look & feel great - work well with or without gloves. Low cost, light weight, and functional. Very simple & usable product.
Produktnr.: 100016546 MAGPUL RAIL COVER TYPE 2 M-LOK POLYMER 1.5" FOR AR-15 FDE 6/PACK Produsentnr.: MAG603-FDE873750005973 M-LOK Type 2 Rail Covers er lavprofilerte, todelte deksler som monteres direkte på M-LOK kompatible systemer. Disse M-LOK-dekslene er ikke orienteringsspesifikke, noe som gjør at brukeren kan montere dem i hvilken som helst retning uten å påvirke funksjonen. Kontaktoverflatene på disse dekslene er teksturert med Magpul TSP-tekstur for ekstra grep, og legger til litt mer enn 1/8 tomme fra monteringsoverflaten. Dekslene har også en avrundet kontur for å minimere potensiell hekting. Låsefanen er forhåndspreget ned langs midten for å tillate brukeren å knekke av seksjoner og blande og matche farger for et mer personlig utseende. Inkluderer seks paneler. Hver dekker ett M-LOK spor.
349NOK304kr 349,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Spesifikasjoner:Farge: Flat Dark EarthLengde: 1.5 inMake: AR-15Material: PolymerStyle: M-LOK
Produktnr.: 100016548 MAGPUL RAIL COVER TYPE 2 M-LOK POLYMER 1.5" FOR AR-15 ODG 6/PACK Produsentnr.: MAG603-ODG873750005997 M-LOK Type 2 Rail Covers er lavprofilerte, todelte deksler som monteres direkte på M-LOK kompatible systemer. Disse M-LOK-dekslene er ikke orienteringsspesifikke, noe som gjør at brukeren kan montere dem i hvilken som helst retning uten å påvirke funksjonen. Kontaktoverflatene på disse dekslene er teksturert med Magpul TSP-tekstur for ekstra grep, og legger til litt mer enn 1/8 tomme fra monteringsoverflaten. Dekslene har også en avrundet kontur for å minimere potensiell hekting. Låsefanen er forhåndspreget ned langs midten for å tillate brukeren å knekke av seksjoner og blande og matche farger for et mer personlig utseende. Inkluderer seks paneler. Hver dekker ett M-LOK spor.
349NOK190kr 349,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 100016545 MAGPUL RAIL COVER TYPE 2 M-LOK POLYMER 1.5" FOR AR-15 BLACK 6/PACK Produsentnr.: MAG603-BLK873750005966 M-LOK Type 2 Rail Covers er lavprofilerte, todelte deksler som monteres direkte på M-LOK kompatible systemer. Disse M-LOK-dekslene er ikke orienteringsspesifikke, noe som gjør at brukeren kan montere dem i hvilken som helst retning uten å påvirke funksjonen. Kontaktoverflatene på disse dekslene er teksturert med Magpul TSP-tekstur for ekstra grep, og legger til litt mer enn 1/8 tomme fra monteringsoverflaten. Dekslene har også en avrundet kontur for å minimere potensiell hekting. Låsefanen er forhåndspreget ned langs midten for å tillate brukeren å knekke av seksjoner og blande og matche farger for et mer personlig utseende. Inkluderer seks paneler. Hver dekker ett M-LOK spor.
349NOK253kr 349,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 100016547 MAGPUL RAIL COVER TYPE 2 M-LOK POLYMER 1.5" FOR AR-15 GRAY 6/PACK Produsentnr.: MAG603-GRY873750005980 M-LOK Type 2 Rail Covers er lavprofilerte, todelte deksler som monteres direkte på M-LOK kompatible systemer. Disse M-LOK-dekslene er ikke orienteringsspesifikke, noe som gjør at brukeren kan montere dem i hvilken som helst retning uten å påvirke funksjonen. Kontaktoverflatene på disse dekslene er teksturert med Magpul TSP-tekstur for ekstra grep, og legger til litt mer enn 1/8 tomme fra monteringsoverflaten. Dekslene har også en avrundet kontur for å minimere potensiell hekting. Låsefanen er forhåndspreget ned langs midten for å tillate brukeren å knekke av seksjoner og blande og matche farger for et mer personlig utseende. Inkluderer seks paneler. Hver dekker ett M-LOK spor.
349NOK216kr 349,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto M-LOK compatible systems. These M-LOK Covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function. The contact surfaces on these covers are textured using the Magpul TSP texture for additional grip, adding slightly more than 1/8” from the mounting surface, these covers also feature a beveled contour to minimize potential snagging. The locking tab is pre-scored down the center to allow the user to snap off sections and mix and match colors for a more custom look. Includes six panels. Each covering one M-LOK slot.
SPECS: Fits- M-LOK Handguards.
Mer...
M-LOK Type 2 Rail Covers er lavprofilerte, todelte deksler som monteres direkte på M-LOK kompatible systemer. Disse M-LOK-dekslene er ikke orienteringsspesifikke, noe som gjør at brukeren kan montere dem i hvilken som helst retning uten å påvirke funksjonen. Kontaktoverflatene på disse dekslene er teksturert med Magpul TSP-tekstur for ekstra grep, og legger til litt mer enn 1/8 tomme fra monteringsoverflaten. Dekslene har også en avrundet kontur for å minimere potensiell hekting. Låsefanen er forhåndspreget ned langs midten for å tillate brukeren å knekke av seksjoner og blande og matche farger for et mer personlig utseende. Inkluderer seks paneler. Hver dekker ett M-LOK spor.
SPECS: Passer til- M-LOK Håndbeskyttere.
Mer...
Kundevurderinger for MAGPUL RAIL COVER TYPE 2 M-LOK POLYMER 1.5" FOR AR-15 FDE 6/PACK
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 5
Light, durable, enhanced grip!(22.09.2018)
These look great, don't add much weight, and do add a lot of nice grip surface area on your M-Lok handguard. Overall very inexpensive and item adds a lot to the rifle. Well worth the cost and minimal time to install.
Magpul Shines(03.10.2016)
I use these in conjunction with the M-Lock hand stop to help protect against heat. They work great.
Must-Have for Metal Handguards(04.10.2016)
These are proving indispensable for a metal rail. Not only do they wedge securely into position (a weakness of the pop-in Type 1), but their relative thickness and tendency to suspend your hand between rows of them (instead of letting skin settle between them and contact metal) makes for excellent heat protection. Their studded texture is likely to be a little sharp for some hands, but it really lends traction, and the flat center gives the hand a good surface to rest against. Realize that these bear little resemblance to the broad, curvy, even slippery XTM Picatinny panel - they're trim and rough, perfect for modern rails. They also couldn't be easier to install, and removal is pretty painless. And if you buy them in different colors, the bases and centers can be mixed and matched in various patterns, either for camouflage or just for flair. All told, I couldn't recommend them more.
Surprised and extremely pleased (15.07.2017)
I ordered these somewhat hesitantly because the older pic-rail covers from Magpul are substandard in my experience. These are excellent, however. Extremely secure and very grippy. There is absolutely no movement and nothing loose about these when installed. I like the feel of the rubbery type m-lok covers, but none that I've tried seat properly and stay that way. An added bonus of these type 2 covers is the slight overhang of the panel creates a perfect spot to retain any tape switches for lights and lasers in the gap between the 12:00 rail and the 9:00 cover panel.
Its like non skid(11.08.2017)
The texture on these covers remind me of non skid, very grippy. If you ever been on a ship, you'll know what I'm talking about. I ordered these to give my rail a little more thickness and added ruggedness as well. Once you snap these in place they can be a pain to remove so make sure you know where you want them on your rail. The center inserts fit very tight (I had to use my rubber mallet to tap these into place), you can easily brake the insert if you're trying to remove them if you're not careful. These are very affordable as you get 6 covers for 12 bucks. I think that is a more then fair price for these and of course its Magpul so you know its quality.
Items snap into unused M-LOK slots on your handguard and add color + semi-aggressive grip texture. They look & feel great - work well with or without gloves. Low cost, light weight, and functional. Very simple & usable product.