This 5.56 NATO AR-15 lower receiver parts kit is made of all high quality, Made in the USA, Mil-spec parts. This kit does not contain a fire control group or pistol grip. Each part is well made, durable and packaged in color coded bags for easy installation. This kit is an excellent choice for building or rebuilding an AR-15 rifle. Contains: Takedown Pin, Receiver Pivot Pin, Takedown Pin Detent (2), Takedown Pin Detent Spring (2), Bolt Catch, Bolt Catch Plunger, Bolt Catch Spring Pin, Bolt Catch Spring, Buffer Retainer, Buffer Retainer Spring, Magazine Catch, Magazine Catch Spring, Magazine Catch Button, Trigger Guard Assembly, Trigger Guard Pivot Spring Pin, Safety Selector, Selector Detent, Selector Detent Spring, Grip Screw Washer, Grip Screw.
SPECS: Fits standard 5.56 NATO AR-15 lower receivers, Mil-Spec.
Mer...
Dette 5.56 NATO AR-15 nedre mottakerdelssettet er laget av alle høykvalitetsdeler, produsert i USA, Mil-Spec. Dette settet inneholder ikke en ildkontrollgruppe eller pistolgrep. Hver del er godt laget, holdbar og pakket i fargekodede poser for enkel installasjon. Dette settet er et utmerket valg for å bygge eller gjenoppbygge et AR-15 gevær. Inneholder: Demonteringsstift, Mottakerpivåstift, Demonteringsstift Detent (2), Demonteringsstift Detentfjær (2), Sluttstyrefangst, Sluttstyrefangstplunger, Sluttstyrefangstfjærstift, Sluttstyrefangstfjær, Bufferholder, Bufferholderfjær, Magasinfangst, Magasinfangstfjær, Magasinfangstknapp, Avtrekkervakt Samling, Avtrekkervakt Pivåfjærstift, Sikkerhetsvelger, Velger Detent, Velger Detentfjær, Grepskruevasker, Grepskrue.
SPECS: Passer standard 5.56 NATO AR-15 nedre mottakere, Mil-Spec.
Mer...
Kundevurderinger for BROWNELLS AR-15 LOWER PARTS KIT 5.56 NO FIRE CONTROL GRP/PISTOL GRIP
Antall vurderinger: 21
Fra brownells.com: 21
Gjennomsnittsvurdering: 2,9
Exactly what I needed and nothing more.(29.07.2016)
I decided to do a featureless build with a Thordsen stock (for California compliance) and this kit was perfect for what I was doing. The kit was well organized and it all went together as planned.
Ok parts kit (02.08.2016)
Trigger guard shinny glossy not the proper matte finish.
Detents for take down pins over sized. Take down pins not so good . Nice mage Release. Nice safety nice bolt catch.
POOR FINISH(04.08.2016)
Finish on the roll pins is very thin so you will get shinny spots from driving the pins in, trigger guard is shinny/glossy, take down pins are poor quality, mag release okay, bolt catch okay, I used some of the parts to assemble a new lower on my day off, but some parts were very low quality and I regretted buying the kit.
Roll pins oversized(04.08.2016)
Both the roll pin for the bolt stop and the trigger guard were oversized to the point that I should have sent them back.
Very poor quality(29.08.2016)
I have gotten quality parts from Brownells for years but this is an exception. The finish appears to be a shinny paint. The safety selector would not fit in the 3/8" hole. I had to sand selector to make it fit. After it was installed the detent was rough and the pointer was off. The detent Spring was bent. I take pride in my rifles and this kit is junk.
Spotty Quality(05.10.2016)
Used to complete an Aero lower. Everything fit and functioned but finish on mag release and trigger guard looked like cheap spray paint. Hammer and trigger pins were both undersized and a sloppy fit. I threw the trigger and hammer pins in the garbage, and have ordered Colt trigger guard and mag release. Really disappointed that Brownells put their name on this junk. Maybe saved me money in the long run as I will be much more skeptical of Brownells branded merchandise.
Worked for me(06.10.2016)
Exactly what I needed. Liked the color coded parts packets. Loved the steel (not brass) retainers for takedown and pivot pins, magnet retrieval when they fly away. I'll order again. My sixth AR build.
Poor Quality, Very Disappointed (17.11.2016)
Bought two of these kits, and had problems with both. Safety detents did not move freely in the lowers, and damaged the detent and safety selector. Had a take down pin that was not machined correctly, so the slot for the detent was not lined up correctly. And the Bolt catch roll pins are a very tight fit, one would not install all the way. Only Brownells product i would not recommend. Save yourself the trouble and get an Anderson or DPMS kit.
Brownells AR-15 lower parts kit(29.01.2017)
Poor quality, everything worked and fit, but roll pins were very tight, finish was inconsistent. Biggest thing was the pivot pin wasn't milled straight and when pushed home it took a chunk out of the corner of my lower, it's not going to hurt anything but to ding up a brand new rifle is a bummer.
Be forewarned!(13.06.2017)
I installed the mag release and bolt catch without incident, then proceeded to the pivot pin installation. Installation was no problem, but the pin would not release and slide open. I had to hammer like crazy to get it to finally release. I opened a second package to try a different pivot pin, spring and detent. Same thing happened with that package. I had to hammer like crazy and actually damaged the lower! I pulled a rifle out of the safe and pulled out the parts to compare. The detents in these LPKs are definitely a smaller circumference. They would go deep into the holes in the detent pin and would not properly release. Beware!
Takedown/pivot pins are crap!!!(01.07.2017)
The pivot pin and takedown pin isn't long enough to fit my Aero lower.
Poor Quality/Missing Part(12.09.2017)
Bought this kit some time ago & finally tried to use on a PSA lower. The trigger guard is very glossy-black, a mis-match to the matte lower and other parts, so I took one from a spare PSA kit. The trigger guard roll pin was simply too large to be hammered in, so I took one from the PSA kit. The bolt catch spring was missing, so back to the PSA kit for that. The take down pin was larger toward the head, and would not go all the way in...so another part had to be cannibalized from the PSA kit. Pivot pin worked but the detent groove is rough and was actually rusty. Other parts were acceptable, but this kit is a waste of money in my opinion. Shame on Brownells for putting their name on a kit of this poor quality.
Missing parts, low quality(20.01.2018)
Product shipped was incomplete, missing magazine catch button and catch spring, as well as roll pin for trigger guard.
safety selector detent required hand fitting with file.
This is a good kind of kit to sell, but if you're going to sell it, have quality control go over it.
Very well put together(31.01.2018)
I dont know what everyone else's deal is, I had no issues what so ever and this was used in my first ever AR build. Love the color coded packets.
Good Value(01.03.2018)
Good value if you plan to upgrade the fire control parts. Everything fits as should.
good quality great price(01.03.2018)
I had a grip and trigger so this was a perfect idea. Fast shipping. Great quality parts. All the parts listed were included, and fit perfectly. I will probably purchase another one of these kits seeing that triggers and grips are usually one of those things that you upgrade.
Good parts for me(01.05.2018)
I don't understand all the 1 star reviews. I've installed four of these into RRA lowers and I've had no problems at all. Fit and finish is very good. Will be buying more soon
DO NOT BUY(05.06.2018)
Half the parts were rusty and the other half were so poorly machined that I didnt wsnt to use them. Ended up scrapping the trigger guard for really sharp edges, take down pins for being out of spec so they take alot of wiggling to work, and the trigger and hammer pins were completely rusty so I didnt use those either. I've used lots of Aero kits in the past, should have done the same with this build.
Seamless(02.09.2018)
Well organized in color coded packets. All parts fit smoothly and quickly into an Aero lower.
Pretty Good(09.09.2018)
Nice packaging and good quality especially for the price. love the sturdiness of the trigger guard since it's not some polymer piece like a lot of lower kits. Only two issues I had that may be my fault is that the trigger guard pin was a huge pain to install because it was too tight and the grip screw got worn out and needs to be replaced because it was also too tight and I'm an idiot who kept threading it. Probably just issues with my lower specifically but just a heads up.
Nice lower parts kit(22.09.2018)
I didn't run into any machining or rust issues with this kit. All items were included, and surprisingly very well packaged and easily identified. Various parts (trigger, safety, mag release) were all bagged and grouped together in color coded bags.
Have purchased other lower kits previously - nothing stuck out as large differences between this and the other kits.
With Brownell's warranty I didn't hesitate to purchase and wasn't disappointed.
Produktnr.: 078000330 BROWNELLS AR-15 LOWER PARTS KIT 5.56 NO FIRE CONTROL GRP/PISTOL GRIP Produsentnr.: LPK5-027XXX050806111714 Dette 5.56 NATO AR-15 nedre mottakerdelssettet er laget av alle høykvalitetsdeler, produsert i USA, Mil-Spec. Dette settet inneholder ikke en ildkontrollgruppe eller pistolgrep. Hver del er godt laget, holdbar og pakket i fargekodede poser for enkel installasjon. Dette settet er et utmerket valg for å bygge eller gjenoppbygge et AR-15 gevær. Inneholder: Demonteringsstift, Mottakerpivåstift, Demonteringsstift Detent (2), Demonteringsstift Detentfjær (2), Sluttstyrefangst, Sluttstyrefangstplunger, Sluttstyrefangstfjærstift, Sluttstyrefangstfjær, Bufferholder, Bufferholderfjær, Magasinfangst, Magasinfangstfjær, Magasinfangstknapp, Avtrekkervakt Samling, Avtrekkervakt Pivåfjærstift, Sikkerhetsvelger, Velger Detent, Velger Detentfjær, Grepskruevasker, Grepskrue.
Made in USA
US eksport klassifisering: 0A501.y.1
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Bygg ditt AR-15 med vårt 5.56 nedre deler kit fra BROWNELLS! 🛠️ Høykvalitetsdeler for enkel installasjon og holdbarhet.
This 5.56 NATO AR-15 lower receiver parts kit is made of all high quality, Made in the USA, Mil-spec parts. This kit does not contain a fire control group or pistol grip. Each part is well made, durable and packaged in color coded bags for easy installation. This kit is an excellent choice for building or rebuilding an AR-15 rifle. Contains: Takedown Pin, Receiver Pivot Pin, Takedown Pin Detent (2), Takedown Pin Detent Spring (2), Bolt Catch, Bolt Catch Plunger, Bolt Catch Spring Pin, Bolt Catch Spring, Buffer Retainer, Buffer Retainer Spring, Magazine Catch, Magazine Catch Spring, Magazine Catch Button, Trigger Guard Assembly, Trigger Guard Pivot Spring Pin, Safety Selector, Selector Detent, Selector Detent Spring, Grip Screw Washer, Grip Screw.
SPECS: Fits standard 5.56 NATO AR-15 lower receivers, Mil-Spec.
Mer...
Dette 5.56 NATO AR-15 nedre mottakerdelssettet er laget av alle høykvalitetsdeler, produsert i USA, Mil-Spec. Dette settet inneholder ikke en ildkontrollgruppe eller pistolgrep. Hver del er godt laget, holdbar og pakket i fargekodede poser for enkel installasjon. Dette settet er et utmerket valg for å bygge eller gjenoppbygge et AR-15 gevær. Inneholder: Demonteringsstift, Mottakerpivåstift, Demonteringsstift Detent (2), Demonteringsstift Detentfjær (2), Sluttstyrefangst, Sluttstyrefangstplunger, Sluttstyrefangstfjærstift, Sluttstyrefangstfjær, Bufferholder, Bufferholderfjær, Magasinfangst, Magasinfangstfjær, Magasinfangstknapp, Avtrekkervakt Samling, Avtrekkervakt Pivåfjærstift, Sikkerhetsvelger, Velger Detent, Velger Detentfjær, Grepskruevasker, Grepskrue.
SPECS: Passer standard 5.56 NATO AR-15 nedre mottakere, Mil-Spec.
Mer...
Kundevurderinger for BROWNELLS AR-15 LOWER PARTS KIT 5.56 NO FIRE CONTROL GRP/PISTOL GRIP
Antall vurderinger: 21
Fra brownells.com: 21
Gjennomsnittsvurdering: 2,9
Exactly what I needed and nothing more.(29.07.2016)
I decided to do a featureless build with a Thordsen stock (for California compliance) and this kit was perfect for what I was doing. The kit was well organized and it all went together as planned.
Ok parts kit (02.08.2016)
Trigger guard shinny glossy not the proper matte finish.
Detents for take down pins over sized. Take down pins not so good . Nice mage Release. Nice safety nice bolt catch.
POOR FINISH(04.08.2016)
Finish on the roll pins is very thin so you will get shinny spots from driving the pins in, trigger guard is shinny/glossy, take down pins are poor quality, mag release okay, bolt catch okay, I used some of the parts to assemble a new lower on my day off, but some parts were very low quality and I regretted buying the kit.
Roll pins oversized(04.08.2016)
Both the roll pin for the bolt stop and the trigger guard were oversized to the point that I should have sent them back.
Very poor quality(29.08.2016)
I have gotten quality parts from Brownells for years but this is an exception. The finish appears to be a shinny paint. The safety selector would not fit in the 3/8" hole. I had to sand selector to make it fit. After it was installed the detent was rough and the pointer was off. The detent Spring was bent. I take pride in my rifles and this kit is junk.
Spotty Quality(05.10.2016)
Used to complete an Aero lower. Everything fit and functioned but finish on mag release and trigger guard looked like cheap spray paint. Hammer and trigger pins were both undersized and a sloppy fit. I threw the trigger and hammer pins in the garbage, and have ordered Colt trigger guard and mag release. Really disappointed that Brownells put their name on this junk. Maybe saved me money in the long run as I will be much more skeptical of Brownells branded merchandise.
Worked for me(06.10.2016)
Exactly what I needed. Liked the color coded parts packets. Loved the steel (not brass) retainers for takedown and pivot pins, magnet retrieval when they fly away. I'll order again. My sixth AR build.
Poor Quality, Very Disappointed (17.11.2016)
Bought two of these kits, and had problems with both. Safety detents did not move freely in the lowers, and damaged the detent and safety selector. Had a take down pin that was not machined correctly, so the slot for the detent was not lined up correctly. And the Bolt catch roll pins are a very tight fit, one would not install all the way. Only Brownells product i would not recommend. Save yourself the trouble and get an Anderson or DPMS kit.
Brownells AR-15 lower parts kit(29.01.2017)
Poor quality, everything worked and fit, but roll pins were very tight, finish was inconsistent. Biggest thing was the pivot pin wasn't milled straight and when pushed home it took a chunk out of the corner of my lower, it's not going to hurt anything but to ding up a brand new rifle is a bummer.
Be forewarned!(13.06.2017)
I installed the mag release and bolt catch without incident, then proceeded to the pivot pin installation. Installation was no problem, but the pin would not release and slide open. I had to hammer like crazy to get it to finally release. I opened a second package to try a different pivot pin, spring and detent. Same thing happened with that package. I had to hammer like crazy and actually damaged the lower! I pulled a rifle out of the safe and pulled out the parts to compare. The detents in these LPKs are definitely a smaller circumference. They would go deep into the holes in the detent pin and would not properly release. Beware!
Takedown/pivot pins are crap!!!(01.07.2017)
The pivot pin and takedown pin isn't long enough to fit my Aero lower.
Poor Quality/Missing Part(12.09.2017)
Bought this kit some time ago & finally tried to use on a PSA lower. The trigger guard is very glossy-black, a mis-match to the matte lower and other parts, so I took one from a spare PSA kit. The trigger guard roll pin was simply too large to be hammered in, so I took one from the PSA kit. The bolt catch spring was missing, so back to the PSA kit for that. The take down pin was larger toward the head, and would not go all the way in...so another part had to be cannibalized from the PSA kit. Pivot pin worked but the detent groove is rough and was actually rusty. Other parts were acceptable, but this kit is a waste of money in my opinion. Shame on Brownells for putting their name on a kit of this poor quality.
Missing parts, low quality(20.01.2018)
Product shipped was incomplete, missing magazine catch button and catch spring, as well as roll pin for trigger guard.
safety selector detent required hand fitting with file.
This is a good kind of kit to sell, but if you're going to sell it, have quality control go over it.
Very well put together(31.01.2018)
I dont know what everyone else's deal is, I had no issues what so ever and this was used in my first ever AR build. Love the color coded packets.
Good Value(01.03.2018)
Good value if you plan to upgrade the fire control parts. Everything fits as should.
good quality great price(01.03.2018)
I had a grip and trigger so this was a perfect idea. Fast shipping. Great quality parts. All the parts listed were included, and fit perfectly. I will probably purchase another one of these kits seeing that triggers and grips are usually one of those things that you upgrade.
Good parts for me(01.05.2018)
I don't understand all the 1 star reviews. I've installed four of these into RRA lowers and I've had no problems at all. Fit and finish is very good. Will be buying more soon
DO NOT BUY(05.06.2018)
Half the parts were rusty and the other half were so poorly machined that I didnt wsnt to use them. Ended up scrapping the trigger guard for really sharp edges, take down pins for being out of spec so they take alot of wiggling to work, and the trigger and hammer pins were completely rusty so I didnt use those either. I've used lots of Aero kits in the past, should have done the same with this build.
Seamless(02.09.2018)
Well organized in color coded packets. All parts fit smoothly and quickly into an Aero lower.
Pretty Good(09.09.2018)
Nice packaging and good quality especially for the price. love the sturdiness of the trigger guard since it's not some polymer piece like a lot of lower kits. Only two issues I had that may be my fault is that the trigger guard pin was a huge pain to install because it was too tight and the grip screw got worn out and needs to be replaced because it was also too tight and I'm an idiot who kept threading it. Probably just issues with my lower specifically but just a heads up.
Nice lower parts kit(22.09.2018)
I didn't run into any machining or rust issues with this kit. All items were included, and surprisingly very well packaged and easily identified. Various parts (trigger, safety, mag release) were all bagged and grouped together in color coded bags.
Have purchased other lower kits previously - nothing stuck out as large differences between this and the other kits.
With Brownell's warranty I didn't hesitate to purchase and wasn't disappointed.
Hjelp og kontakt
(0) 
Nyhetsbrev
Klassisk visning
Mobilvisning