Advanced Warfighter Magazines (AWM) fill the gap between the current metal and polymer magazine designs. These lightweight molded polymer magazines stand up to rough handling and extreme conditions of tactical operations, including heat and impact of sustained full-auto fire. Permanently attached, wrap-around feed lips are made from a single piece of precision formed, hardened steel that is PTFE coated for corrosion resistance. They help promote smooth ammo movement and will not deform when the magazine is stored fully loaded over a long period of time. Tested to withstand temperature extremes of -50 degrees F to +180 degrees F and a 5 foot drop fully loaded, onto concrete without impairment of function. Non-reflective exterior has molded-in ridges and enhanced texturing that improve the structural strength and provide a solid grasping surface. Drops free from mil-spec magwells; load to full capacity and insert into weapons with bolt closed. 30-round model fits pouches designed for standard US-GI-spec magazines. Anti-tilt follower and constant-radius body curve helps ensure smooth, snag-free feeding. Hard polymer base plate provides a positive gripping surface for extracting mag from tight-fitting pouches and removes easily for disassembly and cleaning.
Mer...
Avanserte Warfighter Magazines (AWM) fyller gapet mellom dagens metall- og polymermagasindesign. Disse lette støpte polymermagasinene tåler røff håndtering og ekstreme forhold ved taktiske operasjoner, inkludert varme og påvirkning fra vedvarende full-auto ild. Permanent festet, omsluttende mating lepper er laget av et enkelt stykke presisjonsformet, herdet stål som er PTFE-belagt for korrosjonsmotstand. De bidrar til å fremme jevn ammunisjonsbevegelse og vil ikke deformeres når magasinet er lagret fullt lastet over en lang periode. Testet for å tåle temperaturer fra -50 grader F til +180 grader F og et 5 fot fall fullt lastet, på betong uten funksjonsnedsettelse. Ikke-reflekterende eksteriør har støpte riller og forbedret teksturering som forbedrer den strukturelle styrken og gir et solid grep. Magasinet faller fritt fra mil-spec magbrønner; last til full kapasitet og sett inn i våpen med lukket sluttstykke. 30-runds modellen passer i lommer designet for standard US-GI-spec magasiner. Anti-kantfølger og konstant-radius kroppskurve bidrar til å sikre jevn, snag-fri mating. Hard polymerbunnplate gir en positiv gripeflate for å trekke magasinet ut av tettsittende lommer og fjernes enkelt for demontering og rengjøring.
Mer...
Kundevurderinger for LANCER SYSTEMS AR-15 L5AWM MAGAZINE 223/5.56 30RD POLYMER SMOKE GRAY
Antall vurderinger: 14
Fra brownells.com: 12
Gjennomsnittsvurdering: 4,4
Good product, solid construction.(13.05.2020)
+metal feedlips, good spring, followers don't hang up even when i try to make it happen, transparent, cheapish. -looser in my magwell than pmags (stag15) still no mag related issues. Just a little more expencive than pmags(imo worth it) Would reccomend.
Great magazine for AR platform(23.09.2011)
Bought 5 of the AWM to use in a SIG 556 SWAT. Loading the magazine was a breeze and the ability to see round count was a plus. All magazines functioned with out any problems and the last round locked the bolt to the rear. If you want an alternative to MAGPUL try this magazine I highly recommend it.
Now the best AR Mag on the market(26.10.2011)
I still like Magpul Pmags, but these are even better. Sturdier feed lips, nice aggressive texture to grip, and the translucent plastic allow you to check your round count with a quick glance.
You gotta at least buy one!(03.11.2011)
Extremely durable/reliable! Easy to maintain! Being fully transparent from all around makes it easier to see the remaining ammunition. We ran it over, dropped it on the feedlips numerous times, parked an H2 on it for 10 minutes and it still worked.
The New standard for polymer magazines(10.01.2012)
I don't say this lightly: the AWM is better than a PMAG in ever single way.
It's just as resilient, has stronger feed lips, can be left loaded indefinitely (read: years) with ZERO feed lip spread, slides in and out of magwells faster than PMAG (reloads are as quick as aluminum mags), and it has a true anti-tilt follower (almost as good as magpul enhanced follower and WAY better than the green milspec follower).
Mag spring is VERY strong; it feels like an XP spring...great for reliability in SBRs and over-gassed carbines like Bushmaster and DPMS.
I highly recommend the AWM's without reservation. I go on patrol with these.
Also, these are no longer affected by DEET like the old Lancer L5's.
Smooth Magazines(07.03.2012)
These new lancer magazines are even smoother than the original L5's. They are so easily inserted into the mag well and there is absolutely no play in the follower. Permanent steel feedlips definitely give them an advantage over the Pmags, in my opinion.
Great magazine with one huge flaw(19.04.2012)
I really wanted to like these magazine. I bought both the Translucent 30 rounder, and the black 30 rounder when they first came out. The manufacturing date on my mags are 02/11 and 03/11. The feed lips are great, they're easy to load, the follower and spring both work as they should. The issue I have is that neither one locks the bolt to the rear after the last round.
If I insert an empty magazine on a closed bolt, and pull the bolt back, 50% of the time it'll lock the bolt back, but once I press the bolt release and let the bolt ride home and try it again, it will not work.
Same with when shooting. I went through about 200 rounds in each mag, and every time, the bolt rode home after the last round.
I've heard other people haven't had this issue, but since it's happened to me in the translucent and black mag, I won't be buying anymore.
Great range toys, but I'll stick with my magazines that completely work, instead of mostly work.
Best mag yet(07.06.2012)
The 20 and 30 AWM's survived the Noveske 3 gun class and Larue multigun 2012. They were used for every stage in the heat, rain, and dust of central Texas. Loved the fact that I could visually inspect the number of rounds without having to press check the mag. Monopodded off the base with no issues. Locked back consistently with my rifle. Like them better than PMAGs for overall design.
Best AR Mag Ever(26.03.2016)
Bought 8 of these. Brilliant design, lives up to all the hype. Love the hardened steel feed lips. Love the the look of my shiny brass reloads peeking through the translucent smoke polymer. For just a couple bucks more than a Pmag - totally worth it.
Completely Dependable(26.08.2016)
I have been trying out a couple of these magazines for the past few years and recently bought 6 of the translucent mags for duty use. I just completed a week long LE shooting course and used these mags throughout. No malfunctions. Not one ever. This course included plenty of dirt and mud work and the magazines remained completely reliable, no matter how dirty they got. I have left one magazine loaded more or less continually for 4 years, always with the round on the right side, with no feed lip deformation or body swelling. These mags have proven to be as reliable as other polymer mags without the feedlip susceptibility/brittleness in the cold.
These are the best all around mags!! (27.11.2016)
Being from both a Military as well as Law Enforcement background, I've seen the best, as well as worst equipment. I received two prototypes from Lancer when they first came out- they are yellow in color, and are the L5 version, however, they worked!!
They are still working several years later, and have been paired with my old, trusted, Bushy. The AWF Magazines have proven themselves time and again, and even though I have many mags of different types, and several ranging in capacity from 60-100 rds, if the stuff hits the rotating wind machine, it'll be my Lancer AWF mags in MY bug out bag. To the three star rater, I make an observation. As I've built, repaired, and upgraded many hundreds of these rifles, my suspicion is that it's your BCG causing the failure, not the magazine. Though some mags will work, many out of spec BCG units will act up with some mags. I also recommend checking your bolt catch, as not all are identical. In my builds are the best quality BCG's and bolt catches I can obtain within the budget. Try replacement of these critical components and you'll have the same results as everyone else. Good shooting, everyone!!
Great mags(17.02.2017)
These work perfectly with my SIG 556xi
jam after jam(10.04.2017)
its so pretty... have not shot 1 shot without a jam.
Fungerer bra.(08.01.2017)
Harde å få i med sluttstykket lukket når dem er fulle, men det er bare å demontere magasinet (veldig enkelt!) og kappe av bunnstopperen slik at man kan få i 31 patroner og vips så er magasinet veldig bra å bruke med 30 patroner i!
Produktnr.: 100008531 LANCER SYSTEMS AR-15 L5AWM MAGAZINE 223/5.56 30RD POLYMER SMOKE GRAY Produsentnr.: 999-000-2320-01738435615000 Avanserte Warfighter Magazines (AWM) fyller gapet mellom dagens metall- og polymermagasindesign. Disse lette støpte polymermagasinene tåler røff håndtering og ekstreme forhold ved taktiske operasjoner, inkludert varme og påvirkning fra vedvarende full-auto ild. Permanent festet, omsluttende mating lepper er laget av et enkelt stykke presisjonsformet, herdet stål som er PTFE-belagt for korrosjonsmotstand. De bidrar til å fremme jevn ammunisjonsbevegelse og vil ikke deformeres når magasinet er lagret fullt lastet over en lang periode. Testet for å tåle temperaturer fra -50 grader F til +180 grader F og et 5 fot fall fullt lastet, på betong uten funksjonsnedsettelse. Ikke-reflekterende eksteriør har støpte riller og forbedret teksturering som forbedrer den strukturelle styrken og gir et solid grep. Magasinet faller fritt fra mil-spec magbrønner; last til full kapasitet og sett inn i våpen med lukket sluttstykke. 30-runds modellen passer i lommer designet for standard US-GI-spec magasiner. Anti-kantfølger og konstant-radius kroppskurve bidrar til å sikre jevn, snag-fri mating. Hard polymerbunnplate gir en positiv gripeflate for å trekke magasinet ut av tettsittende lommer og fjernes enkelt for demontering og rengjøring.
459NOK58kr 459,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Krav til dokumentasjon ved kjøp av høykapasitetsmagasin(Original kjøpetillatelse må sendes pr post. Ordre blir ikke effektuert før kjøpetillatelse eller annen dokumentasjon foreligger)
Top takeaways
AWM-magasinet kombinerer styrken av metall med lettheten av polymer, og tåler ekstreme forhold og røff håndtering.
Presisjonsformede mating lepper i herdet stål med PTFE-belegg sikrer jevn ammunisjonsbevegelse og korrosjonsmotstand.
Magasinet er testet for temperaturer fra -50°F til +180°F og tåler et 5 fots fall på betong uten funksjonsnedsettelse.
Made in USA
US eksport klassifisering: 0A501.d
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 100022993 LANCER SYSTEMS AR-15 L5AWM MAGAZINE 223/5.56 30RD POLYMER SMOKE GRAY Avanserte Warfighter Magazines (AWM) fyller gapet mellom dagens metall- og polymermagasindesign. Disse lette støpte polymermagasinene tåler røff håndtering og ekstreme forhold ved taktiske operasjoner, inkludert varme og påvirkning fra vedvarende full-auto ild. Permanent festet, omsluttende mating lepper er laget av et enkelt stykke presisjonsformet, herdet stål som er PTFE-belagt for korrosjonsmotstand. De bidrar til å fremme jevn ammunisjonsbevegelse og vil ikke deformeres når magasinet er lagret fullt lastet over en lang periode. Testet for å tåle temperaturer fra -50 grader F til +180 grader F og et 5 fot fall fullt lastet, på betong uten funksjonsnedsettelse. Ikke-reflekterende eksteriør har støpte riller og forbedret teksturering som forbedrer den strukturelle styrken og gir et solid grep. Magasinet faller fritt fra mil-spec magbrønner; last til full kapasitet og sett inn i våpen med lukket sluttstykke. 30-runds modellen passer i lommer designet for standard US-GI-spec magasiner. Anti-kantfølger og konstant-radius kroppskurve bidrar til å sikre jevn, snag-fri mating. Hard polymerbunnplate gir en positiv gripeflate for å trekke magasinet ut av tettsittende lommer og fjernes enkelt for demontering og rengjøring.
3649NOK5kr 3 649,00
*
Leveringstid ca. 14-21 dager. 5 stk. på lageret i USA
AWM magasiner kombinerer fordeler fra metall- og polymerdesign, med PTFE-belagt stål for korrosjonsmotstand og jevn ammunisjonsbevegelse.
Magasinet tåler ekstreme temperaturer og røff håndtering, inkludert et 5 fot fall på betong uten funksjonsnedsettelse.
30-runds kapasitetsmagasin med anti-kantfølger og konstant-radius kroppskurve for jevn mating, og en hard polymerbunnplate for enkel demontering og rengjøring.
Attributes
Cartridge:
223 Remington,5.56 mm NATO
Finish:
Translucent Smoke Grey
Kapasitet:
30-Round
Make:
AR-15
Material:
Polymer
Antall: 10 Leveringsvekt: 1,134kg
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.d
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 100023490 LANCER SYSTEMS AR-15 L5AWM MAGAZINE 223/5.56 30RD POLYMER SMOKE GRAY 5/PACK Avanserte Warfighter Magazines (AWM) fyller gapet mellom dagens metall- og polymermagasindesign. Disse lette støpte polymermagasinene tåler røff håndtering og ekstreme forhold ved taktiske operasjoner, inkludert varme og påvirkning fra vedvarende full-auto ild. Permanent festet, omsluttende mating lepper er laget av et enkelt stykke presisjonsformet, herdet stål som er PTFE-belagt for korrosjonsmotstand. De bidrar til å fremme jevn ammunisjonsbevegelse og vil ikke deformeres når magasinet er lagret fullt lastet over en lang periode. Testet for å tåle temperaturer fra -50 grader F til +180 grader F og et 5 fot fall fullt lastet, på betong uten funksjonsnedsettelse. Ikke-reflekterende eksteriør har støpte riller og forbedret teksturering som forbedrer den strukturelle styrken og gir et solid grep. Magasinet faller fritt fra mil-spec magbrønner; last til full kapasitet og sett inn i våpen med lukket sluttstykke. 30-runds modellen passer i lommer designet for standard US-GI-spec magasiner. Anti-kantfølger og konstant-radius kroppskurve bidrar til å sikre jevn, snag-fri mating. Hard polymerbunnplate gir en positiv gripeflate for å trekke magasinet ut av tettsittende lommer og fjernes enkelt for demontering og rengjøring.
1899NOK11kr 1 899,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Krav til dokumentasjon ved kjøp av høykapasitetsmagasin(Original kjøpetillatelse må sendes pr post. Ordre blir ikke effektuert før kjøpetillatelse eller annen dokumentasjon foreligger)
Top takeaways
AWM-magasiner er laget av lett støpt polymer som tåler ekstreme forhold og røff håndtering, inkludert full-auto ild.
Permanent festede mating lepper av herdet stål, PTFE-belagt for korrosjonsmotstand, sikrer jevn ammunisjonsbevegelse.
Testet for temperaturer fra -50°F til +180°F og et 5 fot fall fullt lastet, med anti-kantfølger og konstant-radius kroppskurve for jevn mating.
Made in USA
US eksport klassifisering: 0A501.d
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Oppdag AR-15 L5AWM 30-RD magasin i Smoke Gray. 🌫️ Lettvekt, robust design og pålitelig ytelse for taktiske operasjoner.
Advanced Warfighter Magazines (AWM) fill the gap between the current metal and polymer magazine designs. These lightweight molded polymer magazines stand up to rough handling and extreme conditions of tactical operations, including heat and impact of sustained full-auto fire. Permanently attached, wrap-around feed lips are made from a single piece of precision formed, hardened steel that is PTFE coated for corrosion resistance. They help promote smooth ammo movement and will not deform when the magazine is stored fully loaded over a long period of time. Tested to withstand temperature extremes of -50 degrees F to +180 degrees F and a 5 foot drop fully loaded, onto concrete without impairment of function. Non-reflective exterior has molded-in ridges and enhanced texturing that improve the structural strength and provide a solid grasping surface. Drops free from mil-spec magwells; load to full capacity and insert into weapons with bolt closed. 30-round model fits pouches designed for standard US-GI-spec magazines. Anti-tilt follower and constant-radius body curve helps ensure smooth, snag-free feeding. Hard polymer base plate provides a positive gripping surface for extracting mag from tight-fitting pouches and removes easily for disassembly and cleaning.
Mer...
Avanserte Warfighter Magazines (AWM) fyller gapet mellom dagens metall- og polymermagasindesign. Disse lette støpte polymermagasinene tåler røff håndtering og ekstreme forhold ved taktiske operasjoner, inkludert varme og påvirkning fra vedvarende full-auto ild. Permanent festet, omsluttende mating lepper er laget av et enkelt stykke presisjonsformet, herdet stål som er PTFE-belagt for korrosjonsmotstand. De bidrar til å fremme jevn ammunisjonsbevegelse og vil ikke deformeres når magasinet er lagret fullt lastet over en lang periode. Testet for å tåle temperaturer fra -50 grader F til +180 grader F og et 5 fot fall fullt lastet, på betong uten funksjonsnedsettelse. Ikke-reflekterende eksteriør har støpte riller og forbedret teksturering som forbedrer den strukturelle styrken og gir et solid grep. Magasinet faller fritt fra mil-spec magbrønner; last til full kapasitet og sett inn i våpen med lukket sluttstykke. 30-runds modellen passer i lommer designet for standard US-GI-spec magasiner. Anti-kantfølger og konstant-radius kroppskurve bidrar til å sikre jevn, snag-fri mating. Hard polymerbunnplate gir en positiv gripeflate for å trekke magasinet ut av tettsittende lommer og fjernes enkelt for demontering og rengjøring.
Mer...
Kundevurderinger for LANCER SYSTEMS AR-15 L5AWM MAGAZINE 223/5.56 30RD POLYMER SMOKE GRAY
Antall vurderinger: 14
Fra brownells.com: 12
Gjennomsnittsvurdering: 4,4
Good product, solid construction.(13.05.2020)
+metal feedlips, good spring, followers don't hang up even when i try to make it happen, transparent, cheapish. -looser in my magwell than pmags (stag15) still no mag related issues. Just a little more expencive than pmags(imo worth it) Would reccomend.
Great magazine for AR platform(23.09.2011)
Bought 5 of the AWM to use in a SIG 556 SWAT. Loading the magazine was a breeze and the ability to see round count was a plus. All magazines functioned with out any problems and the last round locked the bolt to the rear. If you want an alternative to MAGPUL try this magazine I highly recommend it.
Now the best AR Mag on the market(26.10.2011)
I still like Magpul Pmags, but these are even better. Sturdier feed lips, nice aggressive texture to grip, and the translucent plastic allow you to check your round count with a quick glance.
You gotta at least buy one!(03.11.2011)
Extremely durable/reliable! Easy to maintain! Being fully transparent from all around makes it easier to see the remaining ammunition. We ran it over, dropped it on the feedlips numerous times, parked an H2 on it for 10 minutes and it still worked.
The New standard for polymer magazines(10.01.2012)
I don't say this lightly: the AWM is better than a PMAG in ever single way.
It's just as resilient, has stronger feed lips, can be left loaded indefinitely (read: years) with ZERO feed lip spread, slides in and out of magwells faster than PMAG (reloads are as quick as aluminum mags), and it has a true anti-tilt follower (almost as good as magpul enhanced follower and WAY better than the green milspec follower).
Mag spring is VERY strong; it feels like an XP spring...great for reliability in SBRs and over-gassed carbines like Bushmaster and DPMS.
I highly recommend the AWM's without reservation. I go on patrol with these.
Also, these are no longer affected by DEET like the old Lancer L5's.
Smooth Magazines(07.03.2012)
These new lancer magazines are even smoother than the original L5's. They are so easily inserted into the mag well and there is absolutely no play in the follower. Permanent steel feedlips definitely give them an advantage over the Pmags, in my opinion.
Great magazine with one huge flaw(19.04.2012)
I really wanted to like these magazine. I bought both the Translucent 30 rounder, and the black 30 rounder when they first came out. The manufacturing date on my mags are 02/11 and 03/11. The feed lips are great, they're easy to load, the follower and spring both work as they should. The issue I have is that neither one locks the bolt to the rear after the last round.
If I insert an empty magazine on a closed bolt, and pull the bolt back, 50% of the time it'll lock the bolt back, but once I press the bolt release and let the bolt ride home and try it again, it will not work.
Same with when shooting. I went through about 200 rounds in each mag, and every time, the bolt rode home after the last round.
I've heard other people haven't had this issue, but since it's happened to me in the translucent and black mag, I won't be buying anymore.
Great range toys, but I'll stick with my magazines that completely work, instead of mostly work.
Best mag yet(07.06.2012)
The 20 and 30 AWM's survived the Noveske 3 gun class and Larue multigun 2012. They were used for every stage in the heat, rain, and dust of central Texas. Loved the fact that I could visually inspect the number of rounds without having to press check the mag. Monopodded off the base with no issues. Locked back consistently with my rifle. Like them better than PMAGs for overall design.
Best AR Mag Ever(26.03.2016)
Bought 8 of these. Brilliant design, lives up to all the hype. Love the hardened steel feed lips. Love the the look of my shiny brass reloads peeking through the translucent smoke polymer. For just a couple bucks more than a Pmag - totally worth it.
Completely Dependable(26.08.2016)
I have been trying out a couple of these magazines for the past few years and recently bought 6 of the translucent mags for duty use. I just completed a week long LE shooting course and used these mags throughout. No malfunctions. Not one ever. This course included plenty of dirt and mud work and the magazines remained completely reliable, no matter how dirty they got. I have left one magazine loaded more or less continually for 4 years, always with the round on the right side, with no feed lip deformation or body swelling. These mags have proven to be as reliable as other polymer mags without the feedlip susceptibility/brittleness in the cold.
These are the best all around mags!! (27.11.2016)
Being from both a Military as well as Law Enforcement background, I've seen the best, as well as worst equipment. I received two prototypes from Lancer when they first came out- they are yellow in color, and are the L5 version, however, they worked!!
They are still working several years later, and have been paired with my old, trusted, Bushy. The AWF Magazines have proven themselves time and again, and even though I have many mags of different types, and several ranging in capacity from 60-100 rds, if the stuff hits the rotating wind machine, it'll be my Lancer AWF mags in MY bug out bag. To the three star rater, I make an observation. As I've built, repaired, and upgraded many hundreds of these rifles, my suspicion is that it's your BCG causing the failure, not the magazine. Though some mags will work, many out of spec BCG units will act up with some mags. I also recommend checking your bolt catch, as not all are identical. In my builds are the best quality BCG's and bolt catches I can obtain within the budget. Try replacement of these critical components and you'll have the same results as everyone else. Good shooting, everyone!!
Great mags(17.02.2017)
These work perfectly with my SIG 556xi
jam after jam(10.04.2017)
its so pretty... have not shot 1 shot without a jam.
Fungerer bra.(08.01.2017)
Harde å få i med sluttstykket lukket når dem er fulle, men det er bare å demontere magasinet (veldig enkelt!) og kappe av bunnstopperen slik at man kan få i 31 patroner og vips så er magasinet veldig bra å bruke med 30 patroner i!