Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

682157948628 100044434
GBF (Gas Block Forward Controls) is a 0.750 gas journal gas block done FCD way: meticulously designed and machined, with thoughtful features throughout. Machined from heat treated 4140 bar stock, GBF is manganese phosphate coated, GBF holds rather tight tolerances to squeeze every bit of tight seal we can from the design.  GBF's gas tube hole can be described as semi blind hole, in that it has an access port just big enough to allow a 3/32 punch to go through.  This feature was suggested by the late Semper Paratus Arms owner and operator, Will Larson, its purpose is to minimize the gas tube hole as much as possible, while providing a means for users to use a punch to dislodge an recalcitrant gas tube that's been fixed in place by carbon. Other useful feature is the bosses on both sides of the GBF to give gunsmiths an easy reference point to pin the GBF to the barrel.  Both 5/32x5/8, and 1/8x5/8 pins can be used to pin the GBF to the barrel.   Its set screws are 0.450 apart, which is compatible with one of the set screw spacing options on the popular SLR Rifleworks's 750 dimpling jig. GBF isn't meant to be a lightweight gas block, they prefer strength and dependability over any ever-changing fad.  GBF's sleek appearance is the result of removing material that adds weight but doesn't contribute to the strength and reliability. A gas tube pin, two knurled set screws are included.  5/32x5/8, and 1/8x5/8 coiled pins are a no cost option. Proudly designed and made in the USA."    "Billet machined Heat treated Parkerized 0.750 AR15/M16 low profile gas block 3/32 punch access port in front Knurled set screws and gas tube pin included
1399 1399 1 NOK
Produktnr.: 100044434
FORWARD CONTROLS DESIGN AR-15 .750 GAS BLOCK STEEL
Produsentnr.: GBF (GAS BLOCK, 682157948628 GBF (Gas Block Forward Controls) er en 0.750 gas journal gasblokk utført på FCD-måten: nøye utformet og maskinert, med gjennomtenkte funksjoner gjennom hele designet. Maskinert fra varmebehandlet 4140 stangstål, er GBF belagt med manganfosfat, og holder ganske stramme toleranser for å klemme ut hver bit av tetning vi kan fra designet. GBF sin gassrørshull kan beskrives som et semi-blind hull, i det at det har en tilgangsport akkurat stor nok til å la en 3/32 stans gå gjennom. Denne funksjonen ble foreslått av avdøde Semper Paratus Arms eier og operatør, Will Larson, og formålet er å minimere gassrørshullet så mye som mulig, samtidig som det gir brukerne et middel til å bruke en stans for å løsne et gassrør som har satt seg fast på grunn av karbon. En annen nyttig funksjon er bossene på begge sider av GBF for å gi børsemakere et enkelt referansepunkt for å feste GBF til løpet. Både 5/32x5/8 og 1/8x5/8 pinner kan brukes for å feste GBF til løpet. Settskruene er 0.450 fra hverandre, som er kompatibelt med ett av settskrue avstandsvalgene på den populære SLR Rifleworks sin 750 dimpling jig. GBF er ikke ment å være en lettvekts gassblokk, de foretrekker styrke og pålitelighet over enhver stadig skiftende mote. GBFs slanke utseende er resultatet av å fjerne materiale som legger til vekt, men ikke bidrar til styrke og pålitelighet. En gassrørspinne, to riflete settskruer er inkludert. 5/32x5/8 og 1/8x5/8 spiralfjærpinner er et kostnadsfritt alternativ. Stolt designet og produsert i USA.
1399 NOK 2 kr 1 399,00 *
Leveringstid ca. 14-21 dager.
2 stk. på lageret i USA
Spesifikasjoner: Inside Diameter: .750 Make: AR-15 Material: Steel Style: Low-Profile

Top takeaways

  1. GBF er laget av varmebehandlet 4140 stangstål og belagt med manganfosfat for styrke og pålitelighet.
  2. Designet inkluderer et semi-blind gassrørshull for enkel fjerning av fastsittende gassrør med en 3/32 stans.
  3. Bossene på begge sider gir et enkelt referansepunkt for montering, og settsskruene er kompatible med SLR Rifleworks sin 750 dimpling jig.

Attributes

Inside Diameter: .750 Make: AR-15 Material: Steel Style: Low-Profile Leveringsvekt: 0,045kg Frakthøyde: 25mm Fraktbredde: 102mm Fraktlengde: 178mm UPC : 682157948628

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x




Oppdag AR-15 GAS BLOCK .750" fra FORWARD CONTROLS DESIGN. 💪 Slank, sterk og pålitelig, perfekt for ditt AR-15 prosjekt!

GBF (Gas Block Forward Controls) is a 0.750 gas journal gas block done FCD way: meticulously designed and machined, with thoughtful features throughout. Machined from heat treated 4140 bar stock, GBF is manganese phosphate coated, GBF holds rather tight tolerances to squeeze every bit of tight seal we can from the design.  GBF's gas tube hole can be described as semi blind hole, in that it has an access port just big enough to allow a 3/32 punch to go through.  This feature was suggested by the late Semper Paratus Arms owner and operator, Will Larson, its purpose is to minimize the gas tube hole as much as possible, while providing a means for users to use a punch to dislodge an recalcitrant gas tube that's been fixed in place by carbon. Other useful feature is the bosses on both sides of the GBF to give gunsmiths an easy reference point to pin the GBF to the barrel.  Both 5/32x5/8, and 1/8x5/8 pins can be used to pin the GBF to the barrel.   Its set screws are 0.450 apart, which is compatible with one of the set screw spacing options on the popular SLR Rifleworks's 750 dimpling jig. GBF isn't meant to be a lightweight gas block, they prefer strength and dependability over any ever-changing fad.  GBF's sleek appearance is the result of removing material that adds weight but doesn't contribute to the strength and reliability. A gas tube pin, two knurled set screws are included.  5/32x5/8, and 1/8x5/8 coiled pins are a no cost option. Proudly designed and made in the USA."    "Billet machined Heat treated Parkerized 0.750 AR15/M16 low profile gas block 3/32 punch access port in front Knurled set screws and gas tube pin included
Tilbake til toppen