Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

HAHN PRECISION
AR-15/M16 9MM DEDICATED CONVERSION BLOCK

100002321

Hahn Design Gives Reliable Function

Designed, manufactured, and field-tested specifically for law enforcement personnel who require an AR-15/M16 dedicated to 9mm ammo using Colt and modified Uzi-type magazines. Integral leg hooks over the top of the lower receiver to prevent accidental fall-out during actual combat situations where reliability is paramount. Two-piece, aluminum body features extra tight, mating surfaces to minimize the collection of carbon and brass buildup; scalloped hold-actuator allows unburned powder and other debris to pass through for uninterrupted cycling. Hold actuator is wire EDM-machined from high grade, 01 tool steel and functions with the standard 5.56mm bolt hold-open, which is strong, reliable and more readily available than the 9mm version. (Last round hold-open feature functions with Colt magazines only.) Ejector is of standard, Colt configuration for easy replacement by any department armorer. Funneled magazine well ensures smooth entry for rapid mag changes and limits rotational movement caused by variances in magazine taper. Spring-loaded roller maintains constant tension against the lower receiver well to prevent free play. Steel, feed ramp is heat-treated for extra strength and superior wear-resistance; provides consistent round delivery with most bullet types. Armorer installation recommended.

SPECS: Body 6061-T6 billet aluminum, Mil-Spec black anodized finish. Components Steel, parkerized finish. Fits all Mil-Spec AR-15/M16 receivers. Armorer installation recommended.

Mer...

Hahn Design Gir Pålitelig Funksjon

Designet, produsert og felttestet spesielt for politipersonell som krever en AR-15/M16 dedikert til 9mm ammunisjon som bruker Colt og modifiserte Uzi-type magasiner. Integrert ben kroker over toppen av nedre mottaker for å forhindre utilsiktet fall-ut under faktiske kamp situasjoner der pålitelighet er av største viktighet. To-delt aluminiumskropp har ekstra tette, sammenføyningsoverflater for å minimere samling av karbon og messingoppbygging; skalloperert hold-aktuator tillater uforbrent krutt og annet rusk å passere gjennom for uavbrutt sykling. Hold-aktuatoren er wire EDM-maskinert fra høykvalitets, 01 verktøystål og fungerer med den standard 5.56mm bolt hold-open, som er sterk, pålitelig og mer lett tilgjengelig enn 9mm-versjonen. (Siste runde hold-open funksjon virker kun med Colt magasiner.) Utkaster er av standard Colt konfigurasjon for enkel utskifting av enhver avdelings børsemaker. Traktet magasinbrønn sikrer jevn inngang for raske magasinbytter og begrenser roterende bevegelse forårsaket av variasjoner i magasinets taper. Fjærbelastet rulle opprettholder konstant spenning mot nedre mottakerbrønn for å forhindre fri spill. Stål, mating rampe er varmebehandlet for ekstra styrke og overlegen slitestyrke; gir konsistent rundelevering med de fleste kuletyper. Anbefales installert av børsemaker.

SPECS: Body 6061-T6 billet aluminium, Mil-Spec sort anodisert finish. Komponenter Stål, parkerisert finish. Passer alle Mil-Spec AR-15/M16 mottakere. Anbefales installert av børsemaker.

Mer...

Kundevurderinger for HAHN PRECISION DEDICATED 9MM CONVERSION BLOCK

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,9

Awesome product! (16.11.2009)

Just got my Hahn Dedicated 9mm conversion block. It is worth every penny. It doesnt get any better. This thing is awesome. Perfect fit in my lower. Made extremely well. I have had other conversion blocks and this one is by far the best. Bolt hold open works perectly. I am very impressed. Thank you Brownells.

Excellent Product (21.04.2010)

We used this block with the RRA upper assem. and it feeds,ejects and locks the bolt open every time with both metalform and c products mags. After more than a 1000 rounds that is something for a 9mm AR.

For the Serious 9mm AR-15 Shooter (04.06.2011)

Had not been impressed with performance of bottom loading and plastic blocks used by some of my shooting friends and was somewhat leary of them. This dedicated top loading conversion block is a semi permanent installation in your lower and not a quick change. The block can be removed but not as quickly as the bottom loaded units. Required very minor filing of the inside of my lower's mag well and removal and re-installation of the bolt catch. But, this is what makes this block as reliable as a dedicated 9mm lower receiver and it cannot fall out of the receiver! Functions flawlessly with the Metalform 20 round magazines and holds the bolt open after every last shot. Buy this one first and save money, you won't be disappointed. I am one happy 9mm Carbine shooter.

Worth it (27.08.2012)

Bought for a 9mm build on a generic CMC produced 5.56 lower, using a CMMG dedicated upper and CMMG buffer and Metalform Mags. Skeptical at purchase--but fit exceptionally well, and flawless in operation/function. The installation is benign--all you have to do is partially remove the bolt catch pin; temporarily remove the bolt catch long enough to slide the Hahn insert into the mag well from the top--then reverse the process. I think I spent 3 minutes on the whole deal. Bottom line: the quality and craftsmanship is recognized best when viewing and inspecting the device after installation. Precisely machined and finished. (Hence the brand name) And, Mag well has great machined tapers for mag fit. If you did not CLOSELY inspect, you might think this was a dedicated 9mm lower.
I like mine--zero malfunctions and over 600 rds.

Very happy purchase (11.02.2015)

Decided to build a 9mm AR, but initially balked at the cost of this unit and installed the ProMag unit instead. The Promag unit would not reliably load any type of ammunition I tried. Brownells accepted it back and I exchanged for this unit. I wish I would have started with it! The machining is perfect and it reliably loaded both 124 Grain and 147 Grain FMJ with no problems. Admittedly, have only fired 100 rounds through it using Brownells 32 rnd magazines, but had no failures. If you do not want to go with a dedicated receiver, this unit is worth the cost. There really is no comparison. I tried inexpensive and it was cheap for a reason.

May require adjustment (09.03.2015)

Well made part. However, I had extracting issues which was easily fixed by just slightly bending the ejector closer to the bolt to ensure it was contacting the case head every time, firearm functions flawless ever since. FYI, I tried pro mags which were junk (figures), but the metal form mags they sell here are great!

Hahn conversion block is the best! (29.09.2015)

I installed this in a Spikes lower for a 9mm build. Easy to install. Worked perfect from the first round. Feed everything I stuff in the mags. 147 FMJ-TC, HP's, Even the Bayou 147 FP!

Very much worth the price difference!

Great Product! (17.10.2016)

This is the ultimate 9mm conversion block. Simple installation and flawless performance at the range! Three 32 round mags without a hiccup. Worth the extra bucks!!

Worked perfectly (14.11.2016)

This conversion block worked perfectly. This was my first 9mm AR that I built. Was a little worried about not getting a dedicated lower/upper kit so I did not want to skimp on a cheaper conversion block.

The quality of the block is very high. Feels tough and fit perfectly into the AR lower with no wiggle room. I did have to install it prior to installing the mag release button but that's not any different than any other build I've done.

The Brownell's Colt style magazines fit perfectly again very precise and no wiggle or sloppiness at all. The bolt held back every time the mag was empty. I put around 200 rounds through the combo with zero defects at all. No misfeeds, misfire, or anything. I am very pleased with this item and I know that it'll perform well for anyone.

Les 9 flere anmeldelser fra brownells.com

5099 5099 1 NOK

Produktnr.: 100002321
HAHN PRECISION DEDICATED 9MM CONVERSION BLOCK
Produsentnr.: A9CSRD0405 Designet, produsert og felttestet spesielt for politipersonell som krever en AR-15/M16 dedikert til 9mm ammunisjon som bruker Colt og modifiserte Uzi-type magasiner. Integrert ben kroker over toppen av nedre mottaker for å forhindre utilsiktet fall-ut under faktiske kamp situasjoner der pålitelighet er av største viktighet. To-delt aluminiumskropp har ekstra tette, sammenføyningsoverflater for å minimere samling av karbon og messingoppbygging; skalloperert hold-aktuator tillater uforbrent krutt og annet rusk å passere gjennom for uavbrutt sykling. Hold-aktuatoren er wire EDM-maskinert fra høykvalitets, 01 verktøystål og fungerer med den standard 5.56mm bolt hold-open, som er sterk, pålitelig og mer lett tilgjengelig enn 9mm-versjonen. (Siste runde hold-open funksjon virker kun med Colt magasiner.) Utkaster er av standard Colt konfigurasjon for enkel utskifting av enhver avdelings børsemaker. Traktet magasinbrønn sikrer jevn inngang for raske magasinbytter og begrenser roterende bevegelse forårsaket av variasjoner i magasinets taper. Fjærbelastet rulle opprettholder konstant spenning mot nedre mottakerbrønn for å forhindre fri spill. Stål, mating rampe er varmebehandlet for ekstra styrke og overlegen slitestyrke; gir konsistent rundelevering med de fleste kuletyper. Anbefales installert av børsemaker.

5099 NOK 18 kr 5 099,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Spesielt designet for politipersonell som krever en AR-15/M16 dedikert til 9mm ammunisjon, kompatibel med Colt og modifiserte Uzi-type magasiner.
To-delt aluminiumskropp med ekstra tette sammenføyningsoverflater for å minimere karbon og messingoppbygging, samt en skalloperert hold-aktuator for uforbrutt sykling.
Stål, varmebehandlet mating rampe for ekstra styrke og slitestyrke, med konsistent rundelevering for de fleste kuletyper; anbefales installert av børsemaker.

Attributes

Make: AR-15 Leveringsvekt: 0,136kg Frakthøyde: 15mm Fraktbredde: 74mm Fraktlengde: 74mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Oppgrader din AR-15 med HAHN Precision 9mm konverteringsblokk 🛠️. Designet for pålitelighet og enkel installasjon av Colt magasiner.

Hahn Design Gives Reliable Function

SPECS: Body 6061-T6 billet aluminum, Mil-Spec black anodized finish. Components Steel, parkerized finish. Fits all Mil-Spec AR-15/M16 receivers. Armorer installation recommended.

Mer...

Hahn Design Gir Pålitelig Funksjon

SPECS: Body 6061-T6 billet aluminium, Mil-Spec sort anodisert finish. Komponenter Stål, parkerisert finish. Passer alle Mil-Spec AR-15/M16 mottakere. Anbefales installert av børsemaker.

Mer...

Kundevurderinger for HAHN PRECISION DEDICATED 9MM CONVERSION BLOCK

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,9

Awesome product! (16.11.2009)

Excellent Product (21.04.2010)

For the Serious 9mm AR-15 Shooter (04.06.2011)

Worth it (27.08.2012)

Very happy purchase (11.02.2015)

May require adjustment (09.03.2015)

Hahn conversion block is the best! (29.09.2015)

Great Product! (17.10.2016)

This is the ultimate 9mm conversion block. Simple installation and flawless performance at the range! Three 32 round mags without a hiccup. Worth the extra bucks!!

Worked perfectly (14.11.2016)

Les 9 flere anmeldelser fra brownells.com