Same Factory-Built Magazines That Ship With New AR-10s
Brand-new, factory-made, Generation II magazines built by ArmaLite® feature a spot-welded, heavy gauge steel body that won’t distort when fully loaded and a contoured follower designed to ensure exceptionally smooth, reliable feeding. These aren’t converted M14 magazines, but mags purpose-built specifically for the AR-10® Type "B" lowers only - the same mags that come with new rifles. Available in 5-, 10-, and 15-round capacities to fit a wide range of hunting, competition, and law-enforcement applications. Factory marked floorplate. Will only fit Armalite AR-10® rifles, no other makes or models.
SPECS: Steel, Parkerized, matte black. Fits ArmaLite AR-10 chambered in .308/7.62mm. Will not fit the type "A" AR-10 designed for P-MAG magazines with an "A" serial number prefix.
Mer...
Samme fabrikkbygde magasiner som følger med nye AR-10
Helt nye, fabrikkproduserte, Generasjon II magasiner bygget av ArmaLite® har et punktsveist, kraftig stållegeme som ikke vil deformeres når det er fullt lastet og en konturert følger designet for å sikre eksepsjonelt jevn og pålitelig mating. Dette er ikke ombygde M14 magasiner, men magasiner spesialbygget for AR-10® Type "B" nedre deler kun - de samme magasinene som følger med nye rifler. Tilgjengelig i kapasiteter på 5, 10 og 15 runder for å passe et bredt spekter av jakt, konkurranse og politioppdrag. Fabrikkmerket bunnplate. Passer kun ArmaLite AR-10® rifler, ingen andre merker eller modeller.
SPECS: Stål, parkerisert, matt svart. Passer ArmaLite AR-10 kamret for .308/7.62mm. Vil ikke passe typen "A" AR-10 designet for P-MAG magasiner med et "A" serienummerprefiks.
Mer...
Kundevurderinger for ARMALITE AR-10® MAGAZINE 308 WINCHESTER 10RD STEEL BLACK
Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,4
Gen II 5 rnd Mag,s(04.01.2012)
I bought 2 five round magazines for my AR-10A4. they work fine,with no problems. My only dislike about them is that they are too short,and if you don't make double sure they latch,they fall out. I prefer the longer mags that you can see when in the rifle.They are fine for hunting if you remember to double check them. As with the 20 rnd mags I don't miss the the follower stop dohickey at all.
Does not fit LMT MWS(30.07.2012)
Please be aware that this does not fit the magazine well on an LMT MWS 308. My mistake in purchasing, but wanted to save you all the same experience.
Cannot rate as a result, so gave a neutral response.
not alot a choice(13.05.2010)
I bought 5 because there is not much choice for a Armalite AR10; had jam problems with the first full mag. seems that the bullet tilts down but I'm waisting bulk foreign military surplus that has a long sharp bullet. They feed through my super x ar and my 10 round armalite mags ok. so I think the problem is the follower not coming up flat. Hoping it's just the one cause there ain't much choice on this one.
Armilite King of AR 10's(19.07.2013)
The only weapon-( AR 10) that has a 25 round Mag-and I have 25--mags, they all work with Lake City, all the time , and never fail.
Based on M-14 Magazine (01.04.2016)
Based on the M-14 magazines how can there be any problems. You never hear of anyone saying they had a malfunction with the M-14 magazine and you want have a problem with the Armalite AR-10 magazines. They are built like a tank and last forever. I purchased my first Armalite AR-10 when they first came out and I am still using the magazines that came with it. What more could you ask?
Works Great(27.05.2010)
Nothing better than a factory magazine that feeds and fits perfect. These things are expensive but my 20 round mag functions flawlesslly in the AR-10.
Gen-II 20 rnd Magazines(04.01.2012)
My new AR-10a4 came with gen.II 20 rnd. magazine. Right out of the box it worked great. I don't miss the stupid follower dohickey on the older magazines at all.
Armalite, The Original AR Builder (28.07.2016)
I have been using this original magazine which shipped with my rifle since it was built in 1994. The only problem I ever had was the floor plate started to shift rearward. Take it partially out, give it a slight reverse bend so it catches the housing good, and not a single problem for 7 thousand rounds and counting. I wore out a barrel and still use the original magazine. I'm ordering 3 more as soon as they are in stock. If you know how many you have, then you don't have enough.
Produktnr.: 062000004 ARMALITE AR-10® MAGAZINE 308 WINCHESTER 10RD STEEL BLACK Produsentnr.: 10607001651984085288 Helt nye, fabrikkproduserte, Generasjon II magasiner bygget av ArmaLite® har et punktsveist, kraftig stållegeme som ikke vil deformeres når det er fullt lastet og en konturert følger designet for å sikre eksepsjonelt jevn og pålitelig mating. Dette er ikke ombygde M14 magasiner, men magasiner spesialbygget for AR-10® Type "B" nedre deler kun - de samme magasinene som følger med nye rifler. Tilgjengelig i kapasiteter på 5, 10 og 15 runder for å passe et bredt spekter av jakt, konkurranse og politioppdrag. Fabrikkmerket bunnplate. Passer kun ArmaLite AR-10® rifler, ingen andre merker eller modeller.
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 062000002 ARMALITE AR-10® MAGAZINE 308 WINCHESTER 20RD STEEL BLACK Produsentnr.: 10607002651984085189 Helt nye, fabrikkproduserte, Generasjon II magasiner bygget av ArmaLite® har et punktsveist, kraftig stållegeme som ikke vil deformeres når det er fullt lastet og en konturert følger designet for å sikre eksepsjonelt jevn og pålitelig mating. Dette er ikke ombygde M14 magasiner, men magasiner spesialbygget for AR-10® Type "B" nedre deler kun - de samme magasinene som følger med nye rifler. Tilgjengelig i kapasiteter på 5, 10 og 15 runder for å passe et bredt spekter av jakt, konkurranse og politioppdrag. Fabrikkmerket bunnplate. Passer kun ArmaLite AR-10® rifler, ingen andre merker eller modeller.
Produktnr.: 062000003 ARMALITE AR-10® MAGAZINE 308 WINCHESTER 15RD STEEL BLACK Produsentnr.: 10607009651984090572 Helt nye, fabrikkproduserte, Generasjon II magasiner bygget av ArmaLite® har et punktsveist, kraftig stållegeme som ikke vil deformeres når det er fullt lastet og en konturert følger designet for å sikre eksepsjonelt jevn og pålitelig mating. Dette er ikke ombygde M14 magasiner, men magasiner spesialbygget for AR-10® Type "B" nedre deler kun - de samme magasinene som følger med nye rifler. Tilgjengelig i kapasiteter på 5, 10 og 15 runder for å passe et bredt spekter av jakt, konkurranse og politioppdrag. Fabrikkmerket bunnplate. Passer kun ArmaLite AR-10® rifler, ingen andre merker eller modeller.
Produktnr.: 062000005 ARMALITE AR-10® MAGAZINE 308 WINCHESTER 5RD STEEL BLACK Produsentnr.: 10607000651984085271 Helt nye, fabrikkproduserte, Generasjon II magasiner bygget av ArmaLite® har et punktsveist, kraftig stållegeme som ikke vil deformeres når det er fullt lastet og en konturert følger designet for å sikre eksepsjonelt jevn og pålitelig mating. Dette er ikke ombygde M14 magasiner, men magasiner spesialbygget for AR-10® Type "B" nedre deler kun - de samme magasinene som følger med nye rifler. Tilgjengelig i kapasiteter på 5, 10 og 15 runder for å passe et bredt spekter av jakt, konkurranse og politioppdrag. Fabrikkmerket bunnplate. Passer kun ArmaLite AR-10® rifler, ingen andre merker eller modeller.
Same Factory-Built Magazines That Ship With New AR-10s
Brand-new, factory-made, Generation II magazines built by ArmaLite® feature a spot-welded, heavy gauge steel body that won’t distort when fully loaded and a contoured follower designed to ensure exceptionally smooth, reliable feeding. These aren’t converted M14 magazines, but mags purpose-built specifically for the AR-10® Type "B" lowers only - the same mags that come with new rifles. Available in 5-, 10-, and 15-round capacities to fit a wide range of hunting, competition, and law-enforcement applications. Factory marked floorplate. Will only fit Armalite AR-10® rifles, no other makes or models.
SPECS: Steel, Parkerized, matte black. Fits ArmaLite AR-10 chambered in .308/7.62mm. Will not fit the type "A" AR-10 designed for P-MAG magazines with an "A" serial number prefix.
Mer...
Samme fabrikkbygde magasiner som følger med nye AR-10
Helt nye, fabrikkproduserte, Generasjon II magasiner bygget av ArmaLite® har et punktsveist, kraftig stållegeme som ikke vil deformeres når det er fullt lastet og en konturert følger designet for å sikre eksepsjonelt jevn og pålitelig mating. Dette er ikke ombygde M14 magasiner, men magasiner spesialbygget for AR-10® Type "B" nedre deler kun - de samme magasinene som følger med nye rifler. Tilgjengelig i kapasiteter på 5, 10 og 15 runder for å passe et bredt spekter av jakt, konkurranse og politioppdrag. Fabrikkmerket bunnplate. Passer kun ArmaLite AR-10® rifler, ingen andre merker eller modeller.
SPECS: Stål, parkerisert, matt svart. Passer ArmaLite AR-10 kamret for .308/7.62mm. Vil ikke passe typen "A" AR-10 designet for P-MAG magasiner med et "A" serienummerprefiks.
Mer...
Kundevurderinger for ARMALITE AR-10® MAGAZINE 308 WINCHESTER 10RD STEEL BLACK
Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,4
Gen II 5 rnd Mag,s(04.01.2012)
I bought 2 five round magazines for my AR-10A4. they work fine,with no problems. My only dislike about them is that they are too short,and if you don't make double sure they latch,they fall out. I prefer the longer mags that you can see when in the rifle.They are fine for hunting if you remember to double check them. As with the 20 rnd mags I don't miss the the follower stop dohickey at all.
Does not fit LMT MWS(30.07.2012)
Please be aware that this does not fit the magazine well on an LMT MWS 308. My mistake in purchasing, but wanted to save you all the same experience.
Cannot rate as a result, so gave a neutral response.
not alot a choice(13.05.2010)
I bought 5 because there is not much choice for a Armalite AR10; had jam problems with the first full mag. seems that the bullet tilts down but I'm waisting bulk foreign military surplus that has a long sharp bullet. They feed through my super x ar and my 10 round armalite mags ok. so I think the problem is the follower not coming up flat. Hoping it's just the one cause there ain't much choice on this one.
Armilite King of AR 10's(19.07.2013)
The only weapon-( AR 10) that has a 25 round Mag-and I have 25--mags, they all work with Lake City, all the time , and never fail.
Based on M-14 Magazine (01.04.2016)
Based on the M-14 magazines how can there be any problems. You never hear of anyone saying they had a malfunction with the M-14 magazine and you want have a problem with the Armalite AR-10 magazines. They are built like a tank and last forever. I purchased my first Armalite AR-10 when they first came out and I am still using the magazines that came with it. What more could you ask?
Works Great(27.05.2010)
Nothing better than a factory magazine that feeds and fits perfect. These things are expensive but my 20 round mag functions flawlesslly in the AR-10.
Gen-II 20 rnd Magazines(04.01.2012)
My new AR-10a4 came with gen.II 20 rnd. magazine. Right out of the box it worked great. I don't miss the stupid follower dohickey on the older magazines at all.
Armalite, The Original AR Builder (28.07.2016)
I have been using this original magazine which shipped with my rifle since it was built in 1994. The only problem I ever had was the floor plate started to shift rearward. Take it partially out, give it a slight reverse bend so it catches the housing good, and not a single problem for 7 thousand rounds and counting. I wore out a barrel and still use the original magazine. I'm ordering 3 more as soon as they are in stock. If you know how many you have, then you don't have enough.