Features an innovative reverse venting triple baffle design for the highest recoil reduction in its class. Closed bottom construction combined with upward biased venting effectively eliminates both muzzle rise and dust signature. Precision machined from heat treated stainless steel for superior durability, the M4-72 can withstand the extreme heat of combat conditions without being subject to rapid erosion. Available with an advanced Ionbond® high temperature CrCN coating (matte black). Designed to fit AK-47 style rifles (7.62x39mm) with 14x1mm LH threads. Comes with two heavy duty proprietary crush springs (2 installations) offering the required pre-load for a rock solid fit and accurate alignment. Warning: Reverse venting design may cause excessive blast/concussion on barrels shorter than 14.5″.
SPECS: HTSR 416 stainless steel bar stock, matte black or in-the-white stainless steel finish. 14x1mm LH threads. 2.25" (5.2cm) OAL. 0.875" (2.2cm) dia. 2.6 oz (73.7g) wt. Designed to fit AK style rifles chambered in 7.62x39mm.
Mer...
Har et innovativt omvendt ventilerende trippel baffel-design for høyest rekylreduksjon i sin klasse. Lukket bunnkonstruksjon kombinert med oppovervendt venting eliminerer effektivt både munningsstigning og støvsignatur. Presisjonsmaskinert fra varmebehandlet rustfritt stål for overlegen holdbarhet, M4-72 kan motstå ekstrem varme fra kampforhold uten å bli utsatt for rask erosjon. Tilgjengelig med et avansert Ionbond® høytemperatur CrCN-belegg (matt svart). Designet for å passe til AK-47-stil rifler (7.62x39mm) med 14x1mm LH-gjenger. Leveres med to kraftige proprietære knusefjærer (2 installasjoner) som gir nødvendig forspenning for en steinhard passform og nøyaktig justering. Advarsel: Det omvendte ventilerende designet kan forårsake overdreven blast/konkussjon på løp kortere enn 14.5″.
SPECS: HTSR 416 rustfritt stål, matt svart eller rustfritt stål finish i det hvite. 14x1mm LH-gjenger. 2.25" (5.2cm) OAL. 0.875" (2.2cm) dia. 2.6 oz (73.7g) vekt. Designet for å passe til AK-stil rifler kamret i 7.62x39mm.
Mer...
Kundevurderinger for PRECISION ARMAMENT M4-72 SEVERE-DUTY BRAKE 30 CALIBER 14-1 LH SS BLACK
Antall vurderinger: 1
Fra brownells.com: 1
Gjennomsnittsvurdering: 3
A lot louder than stock(28.03.2016)
It installs easily to the detent pin on the 14-1LH threads. The surprise was pulling the trigger for the first time. It is way louder than stock and the shooter and bystanders get a heck of a blast. It does limit the recoil to where there is relatively no kick at all. I went and tested it in the middle of the forest. I would not take it to the range. I do not believe it is a fault of the muzzle brake but this ak-47 Century Arms throws the fired shell with a lot of force and unless you have someone looking from behind you, you will have no idea that the spent cartridges are 20 yards away to your right. I bought it to calm the kick because of neck problems but I'm not sure that there isn't a better product out there for less than $100.00. Again, this is so loud with the muzzle brake installed that even with pro level ear protection, it sounds so loud. I had accidentally pulled the trigger before putting on my ears and my ears rang for 2weeks. I didn't make that mistake again.
Produktnr.: 100018059 PRECISION ARMAMENT M4-72 SEVERE-DUTY BRAKE 30 CALIBER 14-1 LH SS BLACK Produsentnr.: A04022 Har et innovativt omvendt ventilerende trippel baffel-design for høyest rekylreduksjon i sin klasse. Lukket bunnkonstruksjon kombinert med oppovervendt venting eliminerer effektivt både munningsstigning og støvsignatur. Presisjonsmaskinert fra varmebehandlet rustfritt stål for overlegen holdbarhet, M4-72 kan motstå ekstrem varme fra kampforhold uten å bli utsatt for rask erosjon. Tilgjengelig med et avansert Ionbond® høytemperatur CrCN-belegg (matt svart). Designet for å passe til AK-47-stil rifler (7.62x39mm) med 14x1mm LH-gjenger. Leveres med to kraftige proprietære knusefjærer (2 installasjoner) som gir nødvendig forspenning for en steinhard passform og nøyaktig justering. Advarsel: Det omvendte ventilerende designet kan forårsake overdreven blast/konkussjon på løp kortere enn 14.5″.
2049NOK2kr 2 049,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Features an innovative reverse venting triple baffle design for the highest recoil reduction in its class. Closed bottom construction combined with upward biased venting effectively eliminates both muzzle rise and dust signature. Precision machined from heat treated stainless steel for superior durability, the M4-72 can withstand the extreme heat of combat conditions without being subject to rapid erosion. Available with an advanced Ionbond® high temperature CrCN coating (matte black). Designed to fit AK-47 style rifles (7.62x39mm) with 14x1mm LH threads. Comes with two heavy duty proprietary crush springs (2 installations) offering the required pre-load for a rock solid fit and accurate alignment. Warning: Reverse venting design may cause excessive blast/concussion on barrels shorter than 14.5″.
SPECS: HTSR 416 stainless steel bar stock, matte black or in-the-white stainless steel finish. 14x1mm LH threads. 2.25" (5.2cm) OAL. 0.875" (2.2cm) dia. 2.6 oz (73.7g) wt. Designed to fit AK style rifles chambered in 7.62x39mm.
Mer...
Har et innovativt omvendt ventilerende trippel baffel-design for høyest rekylreduksjon i sin klasse. Lukket bunnkonstruksjon kombinert med oppovervendt venting eliminerer effektivt både munningsstigning og støvsignatur. Presisjonsmaskinert fra varmebehandlet rustfritt stål for overlegen holdbarhet, M4-72 kan motstå ekstrem varme fra kampforhold uten å bli utsatt for rask erosjon. Tilgjengelig med et avansert Ionbond® høytemperatur CrCN-belegg (matt svart). Designet for å passe til AK-47-stil rifler (7.62x39mm) med 14x1mm LH-gjenger. Leveres med to kraftige proprietære knusefjærer (2 installasjoner) som gir nødvendig forspenning for en steinhard passform og nøyaktig justering. Advarsel: Det omvendte ventilerende designet kan forårsake overdreven blast/konkussjon på løp kortere enn 14.5″.
SPECS: HTSR 416 rustfritt stål, matt svart eller rustfritt stål finish i det hvite. 14x1mm LH-gjenger. 2.25" (5.2cm) OAL. 0.875" (2.2cm) dia. 2.6 oz (73.7g) vekt. Designet for å passe til AK-stil rifler kamret i 7.62x39mm.
Mer...
Kundevurderinger for PRECISION ARMAMENT M4-72 SEVERE-DUTY BRAKE 30 CALIBER 14-1 LH SS BLACK
Antall vurderinger: 1
Fra brownells.com: 1
Gjennomsnittsvurdering: 3
A lot louder than stock(28.03.2016)
It installs easily to the detent pin on the 14-1LH threads. The surprise was pulling the trigger for the first time. It is way louder than stock and the shooter and bystanders get a heck of a blast. It does limit the recoil to where there is relatively no kick at all. I went and tested it in the middle of the forest. I would not take it to the range. I do not believe it is a fault of the muzzle brake but this ak-47 Century Arms throws the fired shell with a lot of force and unless you have someone looking from behind you, you will have no idea that the spent cartridges are 20 yards away to your right. I bought it to calm the kick because of neck problems but I'm not sure that there isn't a better product out there for less than $100.00. Again, this is so loud with the muzzle brake installed that even with pro level ear protection, it sounds so loud. I had accidentally pulled the trigger before putting on my ears and my ears rang for 2weeks. I didn't make that mistake again.