Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

BROWNELLS
AR-15 SIGHT WRENCH

050806003279 078000008

Two Styles, For A1 & A2, Give Fast, Convenient Sight Adjustment

Precision machined from tough, stressproof steel with square-profile fingers that grip the sight notches firmly and won't "roll out"; provides easy, exact sight adjustment. Plus, they resist bending and breaking to give years of service. Deeply drilled body fits both issue and tall blade sights. An extra-nice touch are the hex-shaped bodies; they're easy to grasp, easy to turn and won't roll off your bench. Three tools: A1 five-prong and A2 four-prong fit front and rear sights. A1/A2 is double ended to fit both five-detent A1 and four-detent, square blade, A2 front sights only. A2 wrenches also fit FN SCAR.

SPECS: Stressproof steel, blue finish. A1: five-prong and A2: four-prong (adjusts front and rear). 1-3/8" (3.5cm) long x ¾" (19mm) dia. A1/A2: 2½" (6.4cm) long four-prong/five-prong front only wrench. A2 wrench is designed for the standard A-2 style front post

Mer...

To Stiler, For A1 & A2, Gir Rask, Praktisk Siktejustering

Presisjonsmaskinert fra tøft, stressbestandig stål med firkantede profilfingre som griper siktets hakk fast og vil ikke "rulle ut"; gir enkel, nøyaktig siktejustering. I tillegg tåler de bøying og brekkasje for å gi årevis med bruk. Dypt boret kropp passer både standard og høye bladsikter. En ekstra fin detalj er de sekskantede kroppene; de er enkle å gripe, enkle å vri og vil ikke rulle av benken din. Tre verktøy: A1 fem-tann og A2 fire-tann passer både foran og bak sikter. A1/A2 er dobbelt endet for å passe både fem-hakk A1 og fire-hakk, firkantet blad, A2 kun foran sikter. A2-nøklene passer også til FN SCAR.

SPECS: Stressproof stål, blå finish. A1: fem-tann og A2: fire-tann (justerer foran og bak). 1-3/8" (3.5cm) lang x ¾" (19mm) diam. A1/A2: 2½" (6.4cm) lang fire-tann/fem-tann kun foran justeringsnøkkel. A2-nøkkelen er designet for standard A-2 stil frontpost

Mer...

Kundevurderinger for BROWNELLS A1 AR-15 SIGHT WRENCH

Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 3

Flawless adjustment for 4 and 5 prong (16.12.2011)

I had never used an M16/AR15 front sight adjustment tool. I always had used the tip of a bullet. But when the detent holes were too small to fit the bullet tip on a particular rifle, I first tried the other sight adjustment tool (in the same listing as this tool), but that wouldn't fit because of diameter. This tool is flawless and allows adjusting front sights with either 4 or 5 detent holes.

Good dual purpose tool (05.05.2012)

It seems like you can't predict when the sight you need to adjust is a four or five prong-- this solves that dilemma.

Didn't fit any of my A1/A2 sights (30.12.2013)

This tool didn't fit the front sights on any of my A1/A2 rifles(7 of them). The inside diameter of the tool is to small. I had to carefully bend the teeth out and open up the I.D. with a round stone. I then had to file the corners of the teeth to allow me to turn the sight.

Absolutely useless piece of garbage (13.02.2014)

This unit DOES NOT fit a Yankee Hill folding front sight or a Rock River standard A2 - Brownells should list which sights it DOES fit, if any.Besides the fit issue, the basic quality of the "tool" is extremely poor and definately not worth $16.99 - should be more like $2.99. Save your money and look elsewhere - don't bother with this piece of junk!

Recommend It (16.06.2014)

The correct tool for my Colt 6940.

Great Idea, Bad Execution! (30.08.2009)

This tool has all the improvments to make it outstanding.
It is perfect for me because my AR-15s have A2 front sight posts and A1 rear adjustment wheels.

The problem is that the tines or teeth on both ends are not long enough to press down on the spring detents and allow you to turn the front or rear sights. You have to use this tool to turn the post or wheel while using something else to depress the spring detents.
The old tool didn't have the cool new look and the ability to put a wrench to it but at least it worked on its own.

A simple lengthening of the teeth/tines on this tool would make it an outstanding adition to any AR-15/M-16 shooters tool bag.

Worthless trash! Don't waste your money! (16.02.2011)

As the previous reviewer stated, this piece of garbage doesn't work. The prongs are not long enough. If you've got the right size file, you might be able to get it working, but if you pay [$]for a super simple tool, it ought to work...and if you don't do it just right, you'll simply ruin the tool.How does anyone adjust this sight? Seems like it ought to be easy...hardly. Still searching for a tool that will work without destroying my fifty-dollar tritium front sight.

Works when used on the right sight. (26.02.2011)

I gave a scathing review of this tool below, but have learned a little more about it since and would like to revise my statement. I can't edit that review, so I'm adding another one.

My front sight is a Samson and the fit of the post seems a bit tight. Moreover, I was adding a Trijicon tritium post and it's built a little differently than the standard one. The part of the post that this tool turns is taller on the Trijocon than the standard one and the prongs on the tool aren't long enough to depress the pin far enough to let the post turn, so this tool will not work on that sight.

It will probably work okay on a standard post, as long as it's not too tight.

The right tool for me (03.12.2011)

I've never used a front sight tool before. Normally I would just use the tip of a bullet. However, my Bushmaster front sight detents for the front sight were too small to fit the bullet tip. Nothing else worked - not even a small jeweler's screwdriver. I tried both Brownell's AR15 sight wrenches, and this was the right one for me. I'll probably buy a few more to have them on hand.

Dont buy (27.02.2012)

Bought this to use on the Tech Sights. This tool will not fit in the rear sight holes. The diameter of the pin pattern on the tools is too small. I compared it to another that I have which works on both the Tech Sight and A1s. I have not tried this on an A1 though as I dont own one so it might work on that. Very disappointed. Only reason I didnt send it back is because I need the 5 prong front sight tool.

Worked like a champ! (03.03.2015)

Perfect fit and easy adjustment on my old Colt SP1 pre-assist. Hex design made for a good grip.

Only used this one time so can't determine durability of tool. I will say that there is very little strain - should last hopefully. The pins were just long enough to engage but not make contact with carry handle.

Les 11 flere anmeldelser fra brownells.com

379 459 3 NOK

Produktnr.: 078000008
BROWNELLS A1 AR-15 SIGHT WRENCH 050806003279 Presisjonsmaskinert fra tøft, stressbestandig stål med firkantede profilfingre som griper siktets hakk fast og vil ikke "rulle ut"; gir enkel, nøyaktig siktejustering. I tillegg tåler de bøying og brekkasje for å gi årevis med bruk. Dypt boret kropp passer både standard og høye bladsikter. En ekstra fin detalj er de sekskantede kroppene; de er enkle å gripe, enkle å vri og vil ikke rulle av benken din. Tre verktøy: A1 fem-tann og A2 fire-tann passer både foran og bak sikter. A1/A2 er dobbelt endet for å passe både fem-hakk A1 og fire-hakk, firkantet blad, A2 kun foran sikter. A2-nøklene passer også til FN SCAR.

379 NOK 13 kr 379,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Presisjonsmaskinert fra stressbestandig stål med firkantede profilfingre for enkel og nøyaktig siktejustering.
Passer både standard og høye bladsikter, med sekskantede kropper som er enkle å gripe og vri.
Inkluderer tre verktøy: A1 fem-tann og A2 fire-tann for å justere foran og bak sikter, samt passer til FN SCAR.

Attributes

Make: AR-15 Leveringsvekt: 0,005kg Fraktbredde: 83mm Fraktlengde: 146mm UPC : 050806003279

Elementdetaljer

Made in USA

Produktnr.: 078000009
BROWNELLS A2 AR-15 SIGHT WRENCH 050806003286 Presisjonsmaskinert fra tøft, stressbestandig stål med firkantede profilfingre som griper siktets hakk fast og vil ikke "rulle ut"; gir enkel, nøyaktig siktejustering. I tillegg tåler de bøying og brekkasje for å gi årevis med bruk. Dypt boret kropp passer både standard og høye bladsikter. En ekstra fin detalj er de sekskantede kroppene; de er enkle å gripe, enkle å vri og vil ikke rulle av benken din. Tre verktøy: A1 fem-tann og A2 fire-tann passer både foran og bak sikter. A1/A2 er dobbelt endet for å passe både fem-hakk A1 og fire-hakk, firkantet blad, A2 kun foran sikter. A2-nøklene passer også til FN SCAR.

389 NOK 17 kr 389,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Produktnr.: 078000010
BROWNELLS A1/A2 AR-15 SIGHT WRENCH 050806003293 Presisjonsmaskinert fra tøft, stressbestandig stål med firkantede profilfingre som griper siktets hakk fast og vil ikke "rulle ut"; gir enkel, nøyaktig siktejustering. I tillegg tåler de bøying og brekkasje for å gi årevis med bruk. Dypt boret kropp passer både standard og høye bladsikter. En ekstra fin detalj er de sekskantede kroppene; de er enkle å gripe, enkle å vri og vil ikke rulle av benken din. Tre verktøy: A1 fem-tann og A2 fire-tann passer både foran og bak sikter. A1/A2 er dobbelt endet for å passe både fem-hakk A1 og fire-hakk, firkantet blad, A2 kun foran sikter. A2-nøklene passer også til FN SCAR.

459 NOK 23 kr 459,00 *