The strongest small bore scope rings available. Designed to fit a very wide selection of rifles and fit both 3/8” and 11mm dovetails. This is made possible by using a solid steel asymmetrical reversible clamp that can be flipped 180° and used on wider or narrower dovetails for best fit. Features a 70/30 horizontal construction and are only 1/2” wide. Attachment is made to the dovetail using a single T-15 Torx style fastener and have 2 of the same fasteners for the ring top strap holding the entire package together securely.
SPECS: Steel, powder coated, black, matte or gloss finish. Height measured from top of base to inside, bottom of ring. Medium – .406" (10.3mm) nominal high. High - .525" (13.3mm) nominal high.
Mer...
Glatt profil, horisontal deling
De sterkeste småkaliber sikteringene som er tilgjengelige. Designet for å passe et veldig bredt utvalg av rifler og passer både 3/8” og 11mm skinnespor. Dette gjøres mulig ved å bruke en solid stål asymmetrisk reversibel klemme som kan vendes 180° og brukes på bredere eller smalere skinnespor for best passform. Har en 70/30 horisontal konstruksjon og er kun 1/2” brede. Festing til skinnesporet gjøres med en enkelt T-15 Torx-stil festemiddel og har 2 av de samme festemidlene for ringens topprem som holder hele pakken sammen sikkert.
SPECS: Stål, pulverlakkert, svart, matt eller blank finish. Høyde målt fra toppen av basen til innsiden, bunnen av ringen. Medium – .406" (10.3mm) nominell høyde. Høy - .525" (13.3mm) nominell høyde.
Mer...
Kundevurderinger for WARNE MFG. COMPANY 1" MEDIUM (0.90") QD DOVETAIL RINGS, BLACK
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,6
Very nice for all steel rings(02.07.2011)
Plenty high enough for a 42mm objective. Great holding.
Perfect!(18.08.2015)
Bought these to mount to an Anschutz 1415 which has an 11mm rail. Rings have a reversible clamp to accommodate 3/8" or 11mm. Fit great and the gloss is a good match for the gun and gloss Leupold scope I mounted. Everything aligned good and very little windage adjustment was needed to sight in at 75 yards. Quality all steel construction and nicely finished. Best of all, Made in the USA!
excellent rings(27.02.2011)
Top quality, adaptable to European 11mm or American Standard 3/8" dovetail dimensions. Finish and fit are precise. Use matted rings on matted receivers and gloss rings on highly polished receivers for best appearance.
Not so great for my purposes...(27.02.2012)
Well, I pretty much use Warne rings exclusively; it goes without saying that I'm normally more than satisfied with their products. I bought these rings to use with the supplied rail for a Ruger 10-22. The attachment "legs" of these rings are an odd size. They are far too small to fit a Weaver/picatinny rail. On the 10-22, there's a second smaller rail that they did fit well enough to use the scope on the gun, but they were still too small to attach properly; they tilted the scope, and I don't believe the scope was centered to the bore line. Yes, I was able to use the scope, but I never felt right about it and ended up switching to some Leupold rings that fit the Weaver rail properly. Perhaps these were designed to fit another size of rail that I'm not familiar with? Even with a differently sized rail width, I'd still question whether or not the scope was centered to the bore line. Other than all of that, the materials and craftsmanship were typical of Warne's superior quality. I still intend to turn to Warne as my first choice for mounts; unfortunately, these rings leave me wondering if I missed a memo somewhere???
Fits great looks great.(28.03.2012)
I have tried two other sets of rings and they did not fit correct, windage was off by six feet at 100 yards. These were dead on!! I installed these on a CZ-USA 455 American 22lr/17hmr combo with 11mm dove tail rail. Shipping was very quick.
High Quality(28.03.2012)
- Well made - Elegant design - Fits both 11mm and 3/8" dovetails - Does NOT fit a Weaver dovetail and is not intended to. - Very pleased with these ringmounts.
Quality Quality(27.09.2012)
The fact that these rings will fit both sizes of .22 dovetails (do not expect them to fit weaver / picatinny rails, they are NOT intended to do so) makes it so you need only need one stock item on the shelf not two for these jobs. These rings are top quality. A BIG plus is the "clamp" section does NOT foul the bolt handle as some other makes do. The need for windage adjustment should never be a concern, this feature only produces a ring that has a lack of rigidity and strength. Added to the fact they are cheaper than a very similar brand of rings I cannot speak too highly about them.
Produktnr.: 947000626 WARNE MFG. COMPANY 1" MEDIUM (0.90") QD DOVETAIL RINGS, BLACK Produsentnr.: 721LM656813104017 De sterkeste småkaliber sikteringene som er tilgjengelige. Designet for å passe et veldig bredt utvalg av rifler og passer både 3/8” og 11mm skinnespor. Dette gjøres mulig ved å bruke en solid stål asymmetrisk reversibel klemme som kan vendes 180° og brukes på bredere eller smalere skinnespor for best passform. Har en 70/30 horisontal konstruksjon og er kun 1/2” brede. Festing til skinnesporet gjøres med en enkelt T-15 Torx-stil festemiddel og har 2 av de samme festemidlene for ringens topprem som holder hele pakken sammen sikkert.
Produktnr.: 947000096 WARNE MFG. COMPANY 1" MEDIUM (0.90") DOVETAIL RINGS, BLACK Produsentnr.: 721M656813001217 De sterkeste småkaliber sikteringene som er tilgjengelige. Designet for å passe et veldig bredt utvalg av rifler og passer både 3/8” og 11mm skinnespor. Dette gjøres mulig ved å bruke en solid stål asymmetrisk reversibel klemme som kan vendes 180° og brukes på bredere eller smalere skinnespor for best passform. Har en 70/30 horisontal konstruksjon og er kun 1/2” brede. Festing til skinnesporet gjøres med en enkelt T-15 Torx-stil festemiddel og har 2 av de samme festemidlene for ringens topprem som holder hele pakken sammen sikkert.
Produktnr.: 947000098 WARNE MFG. COMPANY 1" HIGH (1.025") DOVETAIL RINGS, BLACK Produsentnr.: 722M656813001248 De sterkeste småkaliber sikteringene som er tilgjengelige. Designet for å passe et veldig bredt utvalg av rifler og passer både 3/8” og 11mm skinnespor. Dette gjøres mulig ved å bruke en solid stål asymmetrisk reversibel klemme som kan vendes 180° og brukes på bredere eller smalere skinnespor for best passform. Har en 70/30 horisontal konstruksjon og er kun 1/2” brede. Festing til skinnesporet gjøres med en enkelt T-15 Torx-stil festemiddel og har 2 av de samme festemidlene for ringens topprem som holder hele pakken sammen sikkert.
Produktnr.: 947000625 WARNE MFG. COMPANY 30MM HIGH (1.115") DOVETAIL RINGS, BLACK Produsentnr.: 732M656813104178 De sterkeste småkaliber sikteringene som er tilgjengelige. Designet for å passe et veldig bredt utvalg av rifler og passer både 3/8” og 11mm skinnespor. Dette gjøres mulig ved å bruke en solid stål asymmetrisk reversibel klemme som kan vendes 180° og brukes på bredere eller smalere skinnespor for best passform. Har en 70/30 horisontal konstruksjon og er kun 1/2” brede. Festing til skinnesporet gjøres med en enkelt T-15 Torx-stil festemiddel og har 2 av de samme festemidlene for ringens topprem som holder hele pakken sammen sikkert.
Produktnr.: 947000624 WARNE MFG. COMPANY 30MM MEDIUM (0.99") DOVETAIL RINGS, BLACK Produsentnr.: 731M656813104147 De sterkeste småkaliber sikteringene som er tilgjengelige. Designet for å passe et veldig bredt utvalg av rifler og passer både 3/8” og 11mm skinnespor. Dette gjøres mulig ved å bruke en solid stål asymmetrisk reversibel klemme som kan vendes 180° og brukes på bredere eller smalere skinnespor for best passform. Har en 70/30 horisontal konstruksjon og er kun 1/2” brede. Festing til skinnesporet gjøres med en enkelt T-15 Torx-stil festemiddel og har 2 av de samme festemidlene for ringens topprem som holder hele pakken sammen sikkert.
The strongest small bore scope rings available. Designed to fit a very wide selection of rifles and fit both 3/8” and 11mm dovetails. This is made possible by using a solid steel asymmetrical reversible clamp that can be flipped 180° and used on wider or narrower dovetails for best fit. Features a 70/30 horizontal construction and are only 1/2” wide. Attachment is made to the dovetail using a single T-15 Torx style fastener and have 2 of the same fasteners for the ring top strap holding the entire package together securely.
SPECS: Steel, powder coated, black, matte or gloss finish. Height measured from top of base to inside, bottom of ring. Medium – .406" (10.3mm) nominal high. High - .525" (13.3mm) nominal high.
Mer...
Glatt profil, horisontal deling
De sterkeste småkaliber sikteringene som er tilgjengelige. Designet for å passe et veldig bredt utvalg av rifler og passer både 3/8” og 11mm skinnespor. Dette gjøres mulig ved å bruke en solid stål asymmetrisk reversibel klemme som kan vendes 180° og brukes på bredere eller smalere skinnespor for best passform. Har en 70/30 horisontal konstruksjon og er kun 1/2” brede. Festing til skinnesporet gjøres med en enkelt T-15 Torx-stil festemiddel og har 2 av de samme festemidlene for ringens topprem som holder hele pakken sammen sikkert.
SPECS: Stål, pulverlakkert, svart, matt eller blank finish. Høyde målt fra toppen av basen til innsiden, bunnen av ringen. Medium – .406" (10.3mm) nominell høyde. Høy - .525" (13.3mm) nominell høyde.
Mer...
Kundevurderinger for WARNE MFG. COMPANY 1" MEDIUM (0.90") QD DOVETAIL RINGS, BLACK
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,6
Very nice for all steel rings(02.07.2011)
Plenty high enough for a 42mm objective. Great holding.
Perfect!(18.08.2015)
Bought these to mount to an Anschutz 1415 which has an 11mm rail. Rings have a reversible clamp to accommodate 3/8" or 11mm. Fit great and the gloss is a good match for the gun and gloss Leupold scope I mounted. Everything aligned good and very little windage adjustment was needed to sight in at 75 yards. Quality all steel construction and nicely finished. Best of all, Made in the USA!
excellent rings(27.02.2011)
Top quality, adaptable to European 11mm or American Standard 3/8" dovetail dimensions. Finish and fit are precise. Use matted rings on matted receivers and gloss rings on highly polished receivers for best appearance.
Not so great for my purposes...(27.02.2012)
Well, I pretty much use Warne rings exclusively; it goes without saying that I'm normally more than satisfied with their products. I bought these rings to use with the supplied rail for a Ruger 10-22. The attachment "legs" of these rings are an odd size. They are far too small to fit a Weaver/picatinny rail. On the 10-22, there's a second smaller rail that they did fit well enough to use the scope on the gun, but they were still too small to attach properly; they tilted the scope, and I don't believe the scope was centered to the bore line. Yes, I was able to use the scope, but I never felt right about it and ended up switching to some Leupold rings that fit the Weaver rail properly. Perhaps these were designed to fit another size of rail that I'm not familiar with? Even with a differently sized rail width, I'd still question whether or not the scope was centered to the bore line. Other than all of that, the materials and craftsmanship were typical of Warne's superior quality. I still intend to turn to Warne as my first choice for mounts; unfortunately, these rings leave me wondering if I missed a memo somewhere???
Fits great looks great.(28.03.2012)
I have tried two other sets of rings and they did not fit correct, windage was off by six feet at 100 yards. These were dead on!! I installed these on a CZ-USA 455 American 22lr/17hmr combo with 11mm dove tail rail. Shipping was very quick.
High Quality(28.03.2012)
- Well made - Elegant design - Fits both 11mm and 3/8" dovetails - Does NOT fit a Weaver dovetail and is not intended to. - Very pleased with these ringmounts.
Quality Quality(27.09.2012)
The fact that these rings will fit both sizes of .22 dovetails (do not expect them to fit weaver / picatinny rails, they are NOT intended to do so) makes it so you need only need one stock item on the shelf not two for these jobs. These rings are top quality. A BIG plus is the "clamp" section does NOT foul the bolt handle as some other makes do. The need for windage adjustment should never be a concern, this feature only produces a ring that has a lack of rigidity and strength. Added to the fact they are cheaper than a very similar brand of rings I cannot speak too highly about them.