Rugged steel, phosphate-treated magazine stands up to the harsh conditions of combat and competition. Self-lubricating polymer follower and heat-treated, precision-wound spring delivers 20 rounds of ammo reliably and consistently. Steel floorplate easily removes for cleaning. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight’s Armament SR-25, Remington R-25 (.308), and Stoner SR-25. Will not fit Armalite AR10.
SPECS: Steel, heat treated, black oxide finish, polymer follower, 20-round capacity. 55⁄8 long. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Does not fit the ArmaLite AR-10, Rock River Arms, or any rifle using an FN/FAL magazine.
Mer...
Passer de fleste AR-stil .308 rifleplattformer
Robust stålmagasin behandlet med fosfat tåler tøffe forhold i kamp og konkurranse. Selvsmørende polymerfølger og varmebehandlet, presisjonsspunnet fjær leverer 20 patroner pålitelig og konsekvent. Stålbunnplaten kan enkelt fjernes for rengjøring. Passer til DPMS Panther LR-seriens rifler (.243, .260, .308 kaliber), Knight’s Armament SR-25, Remington R-25 (.308), og Stoner SR-25. Vil ikke passe til Armalite AR10.
SPECS: Stål, varmebehandlet, sort oksid finish, polymerfølger, 20-runders kapasitet. 55⁄8 lang. Passer til DPMS Panther LR-seriens rifler (.243, .260, .308 kaliber), Knight SR-25, Remington R-25 (.308), og Stoner SR-25. Passer ikke til ArmaLite AR-10, Rock River Arms, eller noen rifle som bruker et FN/FAL magasin.
Mer...
Kundevurderinger for PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK
Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 3
Not Worth the $$(15.05.2013)
I have been in the shooting sport and firearms industry for close to 40 years. I have seen it all in my time. I own a LaRue ONB in 7.62mm, arguably, one of the best semi autos of all time. I ordered 3 of these 20 round magazines on Jan 4. Today, on 5/15/13 I received my order. All 3 magazines won't seat in the receiver without beating them in. The finish is rough as a cob like they were sandblasted with play ground sand. If anyone needs 3 Pro-Mag, DPMS 20round M110 magazines, check the auction sites because these 3 will be somewhere for sale in the next 24 hours.They are not fit for duty.
They work(25.05.2013)
I picked up 5 of these magazines for my 308 AR build only because they were the only magazines I could find (then and now). At first, the spring seemed weak and the bolt would only lock to the rear every other time the magazine was emptied. Now after a couple uses it locks to the rear every time. I've never had a misfeed either. It may be because the magazine seemed to be coated in a pretty heavy coat of grease when I opened the package and that may be finally wearing off, even after cleaning with CLP when I first got them. Overall not a bad magazine but there are definitely better ones out there. I wouldn't trust them in 3 gun competition but for normal range work they are more than fine.
They stick in my LWRC's mag well and jam(12.06.2013)
the followers are too small and tend to give tilt-type jams. By too small I mean teh forward edges tend to pop out over the mag body's retention "tabs".
These are nothing one would count on in a match
Good Mag and in stock(20.06.2013)
Worked fine in my DPMS sportico 308 and they have it in stock !
.308 magazine in m&p 10(15.07.2013)
I use it in my smith and Wesson m&p 10. it works great, does what it says, fits easily in my gun, locks the bolt to the rear after the last shot, haven't had any problems whatsoever, no double feeds or any malfunctions at all. the only reason I did not give this magazine 5 stars is when its fully loaded with rounds it makes this weird rattling sound when moved, that I would prefer it didn't make, other than that ill be buying a lot of these very soon.
OK IN m&p10(18.07.2013)
OK but a little balky in feeding.
Big fan!!!(19.04.2014)
LOVE IT
good mag for the price.(06.03.2017)
I used it at the range and they ran very well. I have a D.P.M.S. LR 308, and if you have one these mags are for you because the D.P.M.S. mags go for 40.00$ ea. One thing to note they take 19 rounds. If you try 20 it will not feed the first round. But with 19 all is well.
Bought 1 to evaluate(04.04.2018)
The magazine is well made with a smooth black phosphate finish. It looks almost OEM. Follower tilts. On a DPMS G2B24, it is a poor fit. Very difficult to insert and almost impossible to remove. Returned.
Produktnr.: 687000069 PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK Produsentnr.: DPM-A1708279010149 Robust stålmagasin behandlet med fosfat tåler tøffe forhold i kamp og konkurranse. Selvsmørende polymerfølger og varmebehandlet, presisjonsspunnet fjær leverer 20 patroner pålitelig og konsekvent. Stålbunnplaten kan enkelt fjernes for rengjøring. Passer til DPMS Panther LR-seriens rifler (.243, .260, .308 kaliber), Knight’s Armament SR-25, Remington R-25 (.308), og Stoner SR-25. Vil ikke passe til Armalite AR10.
549NOK0kr 549,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Spesifikasjoner:Capacity: 20-RoundFinish: BlackKaliber: 308 Winchester, 7.62 mm NATOMake: AR .308Material: SteelType låskasse: Semi-AutoAntall: 1
Krav til dokumentasjon ved kjøp av høykapasitetsmagasin(Original kjøpetillatelse må sendes pr post. Ordre blir ikke effektuert før kjøpetillatelse eller annen dokumentasjon foreligger)
Top takeaways
Robust stålmagasin med fosfatbehandling og sort oksid finish som tåler tøffe forhold og har en kapasitet på 20 runder.
Passer til DPMS Panther LR-seriens rifler (.243, .260, .308 kaliber), Knight’s Armament SR-25, Remington R-25 (.308), og Stoner SR-25, men ikke til Armalite AR10.
Inneholder selvsmørende polymerfølger og varmebehandlet, presisjonsspunnet fjær for pålitelig og konsekvent funksjon.
Attributes
Action Type:
Semi-Auto
Cartridge:
308 Winchester,7.62 mm NATO
Finish:
Black
Kapasitet:
20-Round
Make:
AR .308
Material:
Steel
Leveringsvekt: 0,272kgFrakthøyde: 10mmFraktbredde: 114mmFraktlengde: 267mm
UPC
: 708279010149
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.d
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Oppdag AR .308 20RD MAGAZINE! ✨ Robust stål og presisjon for pålitelig ytelse i kamp og konkurranse. Perfekt for flere rifler.
Rugged steel, phosphate-treated magazine stands up to the harsh conditions of combat and competition. Self-lubricating polymer follower and heat-treated, precision-wound spring delivers 20 rounds of ammo reliably and consistently. Steel floorplate easily removes for cleaning. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight’s Armament SR-25, Remington R-25 (.308), and Stoner SR-25. Will not fit Armalite AR10.
SPECS: Steel, heat treated, black oxide finish, polymer follower, 20-round capacity. 55⁄8 long. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Does not fit the ArmaLite AR-10, Rock River Arms, or any rifle using an FN/FAL magazine.
Mer...
Passer de fleste AR-stil .308 rifleplattformer
Robust stålmagasin behandlet med fosfat tåler tøffe forhold i kamp og konkurranse. Selvsmørende polymerfølger og varmebehandlet, presisjonsspunnet fjær leverer 20 patroner pålitelig og konsekvent. Stålbunnplaten kan enkelt fjernes for rengjøring. Passer til DPMS Panther LR-seriens rifler (.243, .260, .308 kaliber), Knight’s Armament SR-25, Remington R-25 (.308), og Stoner SR-25. Vil ikke passe til Armalite AR10.
SPECS: Stål, varmebehandlet, sort oksid finish, polymerfølger, 20-runders kapasitet. 55⁄8 lang. Passer til DPMS Panther LR-seriens rifler (.243, .260, .308 kaliber), Knight SR-25, Remington R-25 (.308), og Stoner SR-25. Passer ikke til ArmaLite AR-10, Rock River Arms, eller noen rifle som bruker et FN/FAL magasin.
Mer...
Kundevurderinger for PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK
Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 3
Not Worth the $$(15.05.2013)
I have been in the shooting sport and firearms industry for close to 40 years. I have seen it all in my time. I own a LaRue ONB in 7.62mm, arguably, one of the best semi autos of all time. I ordered 3 of these 20 round magazines on Jan 4. Today, on 5/15/13 I received my order. All 3 magazines won't seat in the receiver without beating them in. The finish is rough as a cob like they were sandblasted with play ground sand. If anyone needs 3 Pro-Mag, DPMS 20round M110 magazines, check the auction sites because these 3 will be somewhere for sale in the next 24 hours.They are not fit for duty.
They work(25.05.2013)
I picked up 5 of these magazines for my 308 AR build only because they were the only magazines I could find (then and now). At first, the spring seemed weak and the bolt would only lock to the rear every other time the magazine was emptied. Now after a couple uses it locks to the rear every time. I've never had a misfeed either. It may be because the magazine seemed to be coated in a pretty heavy coat of grease when I opened the package and that may be finally wearing off, even after cleaning with CLP when I first got them. Overall not a bad magazine but there are definitely better ones out there. I wouldn't trust them in 3 gun competition but for normal range work they are more than fine.
They stick in my LWRC's mag well and jam(12.06.2013)
the followers are too small and tend to give tilt-type jams. By too small I mean teh forward edges tend to pop out over the mag body's retention "tabs".
These are nothing one would count on in a match
Good Mag and in stock(20.06.2013)
Worked fine in my DPMS sportico 308 and they have it in stock !
.308 magazine in m&p 10(15.07.2013)
I use it in my smith and Wesson m&p 10. it works great, does what it says, fits easily in my gun, locks the bolt to the rear after the last shot, haven't had any problems whatsoever, no double feeds or any malfunctions at all. the only reason I did not give this magazine 5 stars is when its fully loaded with rounds it makes this weird rattling sound when moved, that I would prefer it didn't make, other than that ill be buying a lot of these very soon.
OK IN m&p10(18.07.2013)
OK but a little balky in feeding.
Big fan!!!(19.04.2014)
LOVE IT
good mag for the price.(06.03.2017)
I used it at the range and they ran very well. I have a D.P.M.S. LR 308, and if you have one these mags are for you because the D.P.M.S. mags go for 40.00$ ea. One thing to note they take 19 rounds. If you try 20 it will not feed the first round. But with 19 all is well.
Bought 1 to evaluate(04.04.2018)
The magazine is well made with a smooth black phosphate finish. It looks almost OEM. Follower tilts. On a DPMS G2B24, it is a poor fit. Very difficult to insert and almost impossible to remove. Returned.