The 3-In-1 Case Mouth Cutter from Forster creates a perfectly aligned, consistent chamfer on the inside and outside of the case mouth to help ensure benchrest quality handloads. Installs easily over the existing cutter shaft on all Foster Original and Power Case trimmers. Chamfers the inside to a 14° angle that works for both VLD boat tail and standard bullets. Outside is chamfered to a 30° angle, plus is fully adjustable for chamfer length. Long lasting carbide blades hold edge indefinitely with proper care.
Mer...
3-In-1 Case Mouth Cutter fra Forster skaper en perfekt justert, konsistent avfasing på innsiden og utsiden av hylsemunningen for å bidra til å sikre benkeskyting av høy kvalitet. Monteres enkelt over den eksisterende kutterskaftet på alle Foster Original og Power Case trimmere. Avfaser innsiden til en 14° vinkel som fungerer for både VLD båthale og standardkuler. Utsiden er avfaset til en 30° vinkel, i tillegg er den fullt justerbar for avfasingslengde. Langvarige karbidblader holder kanten på ubestemt tid med riktig stell.
Mer...
Kundevurderinger for FORSTER PRODUCTS, INC. 0.308" PILOT, 3-IN-1 CASE MOUTH CUTTER
Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 5
Forster really knows how to help!(15.11.2015)
I rarely review stuff I buy online unless its really bad or really good. Up until now I have been trimming with the original Forster trimmer and power adapter. But hated HATED the chamfer deburring process with the paper weight looking thing. 30 cases and my hand was stiff. Unlike some reloading products this performs as advertised. Real time, and pain saver! The case mouth is sexy after a trim. I was skeptical about the price, but their ingenuity to make these processes easier earns the extra coin.
Perfect addition(26.06.2017)
I've owned a Forster Classic case trimmer for over 25 years and I've hand cranked it all that time. I just added a Forster Power Adapter and two 3 in one Case Mouth Cutters in .308 and .224. These cutters are outstanding. With cutting and chamfering the inside and outside of the case at one time I've saved a considerable amount time and effort. The end product is a perfectly trimmed case. With the power adapter there are no more blisters on my hand and the time of cutting is reduced. When the 3 in 1 is placed on the trimmer you will have to extend the cutting length of the trimmer. The rear collet can be unscrewed and moved further to the rear. On my Classic it appears that cases of the .308 length are about the maximum length that I can trim with the 30 caliber 3 in 1. I reload a lot of range brass in .223 and .308. This product is definitely a time and effort saver. Wish I would have installed this years ago. If you lost the instructions for your Classic cutter, as I have, Forster has instruction manuals for all their products online at their website.
Slick! Just slips over the existing cutter without damage to it. Trims, deburrs, and chamfers with the same effort as trimming alone. Loosen the set screw and remove to use the trimmer as before.
I have the .308 and .223 and plan to buy the .243.
I use the power adapter and its just plain fast. No need for an expensive solution now.
Perfection!(28.10.2010)
I purchased the .224 & .243 3-In-1 Case Mouth Cutters. I had my local machinest make a press fit adaptor for each one, so that I can use them on my RCBS Trim Pro Power Case Trimmer. Absolutely perfect trimming, & case mouth deburring inside & out! 2 less steps needed on my Case Mate station. I have tried the RCBS 3-In-1 cutters, but the burrs build up on the case mouth cutter so you need to constantly clean out the burrs to maintain perfect case mouth deburring. No burr buildup with the Forester 3-In-1 unit. The machinest bill was not cheap, but for the gain in case preperation speed, well worth the cost.
WORTH THE EXTRA MONE.(17.02.2011)
I TRIM LARGE QUANITIES OF .556 BRASS. THIS SAVES HOURS OF WORK AND LEAVES A GREAT FINISH. ALSO SINCLAIR IS CHEAPER THAN BUYING DIRECTLY FTOM FORSTER. JUST WISH FORSTER MADE IN 6.5MM.
Average Joe Review(12.04.2011)
This product is absolutely fantastic. I use this with the Forster original case trimmer. Preparing 223 brass to exactly 1.750 could not be any easier. You trim and chamfer the inside and outside of the case with just a few turns of the handle. You are done!! Average Joe review gives this product a buy recommendation, you will not be disappointed!!
223 3 in 1 cutter(22.01.2012)
This cutter is the best thing I have gotten in awhile! It saves alot of time and so far it trims, chamfers, and deburres perfectly. Couldn't get any better. I ordered this along with the Forster power adapter...perfect! I actually enjoy this part of reloading now as I dreaded this 3 part process of reloading. I didn't want to pay the price but I am very happy I did and well worth every penny.
Fantastic Tool(08.02.2012)
This is a fantastic tool. I installed it on my RCBS power case trimmer. The 3 in 1 head has a .490 female hole that slides over the rotating assembly of the RCBS case trimmer. The male end of the RCBS trimmer is .493 dia. I had to turn-sand .0035 from the end of the RCBS shaft so that the Forster head would slide on it, and then tighten the set screw and go to work. THe empty case has to be re-sized before attempting to use the 3 in 1 head. If the case isn't tight to the heads pilot, then the cut will be uneven. So, clean and prep your fired brass and the last step is trim to length. The 3 in 1 is already set from the factory, don't mess with it. The head will cut to length, chamfer and de-bur all in one easy stroke. This handy little tool saved me hours of work by combining all three cuts into one. I am annal about preciseness, this tool will leave you within .0005 tolerances. The Carbide cutters leave an almost polished finish. I've already recommended this to friends. I hate to see anyone waste time, this tool give time back.
Produktnr.: 749009542 FORSTER PRODUCTS, INC. 0.308" PILOT, 3-IN-1 CASE MOUTH CUTTER Produsentnr.: 3CUT-308757253996436 3-In-1 Case Mouth Cutter fra Forster skaper en perfekt justert, konsistent avfasing på innsiden og utsiden av hylsemunningen for å bidra til å sikre benkeskyting av høy kvalitet. Monteres enkelt over den eksisterende kutterskaftet på alle Foster Original og Power Case trimmere. Avfaser innsiden til en 14° vinkel som fungerer for både VLD båthale og standardkuler. Utsiden er avfaset til en 30° vinkel, i tillegg er den fullt justerbar for avfasingslengde. Langvarige karbidblader holder kanten på ubestemt tid med riktig stell.
1449NOK0kr 1 449,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
3-In-1 Case Mouth Cutter fra Forster gir en perfekt justert avfasing på innsiden og utsiden av hylsemunningen for høy kvalitets benkeskyting.
Den monteres enkelt på eksisterende kutterskaft på alle Forster Original og Power Case trimmere og er fullt justerbar for avfasingslengde.
Innsiden avfases til en 14° vinkel for både VLD båthale og standardkuler, mens utsiden avfases til en 30° vinkel. Langvarige karbidblader sikrer holdbarhet med riktig stell.
Produktnr.: 749009540 FORSTER PRODUCTS, INC. 0.224" PILOT, 3-IN-1 CASE MOUTH CUTTER Produsentnr.: 3CUT-224757253996450 3-In-1 Case Mouth Cutter fra Forster skaper en perfekt justert, konsistent avfasing på innsiden og utsiden av hylsemunningen for å bidra til å sikre benkeskyting av høy kvalitet. Monteres enkelt over den eksisterende kutterskaftet på alle Foster Original og Power Case trimmere. Avfaser innsiden til en 14° vinkel som fungerer for både VLD båthale og standardkuler. Utsiden er avfaset til en 30° vinkel, i tillegg er den fullt justerbar for avfasingslengde. Langvarige karbidblader holder kanten på ubestemt tid med riktig stell.
1449NOK4kr 1 449,00
*
Leveringstid ca. 14-21 dager. 4 stk. på lageret i USA
Produktnr.: 749009541 FORSTER PRODUCTS, INC. 0.243" PILOT, 3-IN-1 CASE MOUTH CUTTER Produsentnr.: 3CUT-243757253996443 3-In-1 Case Mouth Cutter fra Forster skaper en perfekt justert, konsistent avfasing på innsiden og utsiden av hylsemunningen for å bidra til å sikre benkeskyting av høy kvalitet. Monteres enkelt over den eksisterende kutterskaftet på alle Foster Original og Power Case trimmere. Avfaser innsiden til en 14° vinkel som fungerer for både VLD båthale og standardkuler. Utsiden er avfaset til en 30° vinkel, i tillegg er den fullt justerbar for avfasingslengde. Langvarige karbidblader holder kanten på ubestemt tid med riktig stell.
1449NOK1kr 1 449,00
*
Leveringstid ca. 14-21 dager. 1 stk. på lageret i USA
Produktnr.: 749013477 FORSTER PRODUCTS, INC. 0.264" PILOT, 3-IN-1 CASE MOUTH CUTTER Produsentnr.: 3CUT-264757253995903 3-In-1 Case Mouth Cutter fra Forster skaper en perfekt justert, konsistent avfasing på innsiden og utsiden av hylsemunningen for å bidra til å sikre benkeskyting av høy kvalitet. Monteres enkelt over den eksisterende kutterskaftet på alle Foster Original og Power Case trimmere. Avfaser innsiden til en 14° vinkel som fungerer for både VLD båthale og standardkuler. Utsiden er avfaset til en 30° vinkel, i tillegg er den fullt justerbar for avfasingslengde. Langvarige karbidblader holder kanten på ubestemt tid med riktig stell.
1449NOK3kr 1 449,00
*
Leveringstid ca. 14-21 dager. 3 stk. på lageret i USA
Produktnr.: 319000095 FORSTER PRODUCTS, INC. 0.277" PILOT, 3-IN-1 CASE MOUTH CUTTER Produsentnr.: 3CUT-277757253991493 3-In-1 Case Mouth Cutter fra Forster skaper en perfekt justert, konsistent avfasing på innsiden og utsiden av hylsemunningen for å bidra til å sikre benkeskyting av høy kvalitet. Monteres enkelt over den eksisterende kutterskaftet på alle Foster Original og Power Case trimmere. Avfaser innsiden til en 14° vinkel som fungerer for både VLD båthale og standardkuler. Utsiden er avfaset til en 30° vinkel, i tillegg er den fullt justerbar for avfasingslengde. Langvarige karbidblader holder kanten på ubestemt tid med riktig stell.
1399NOK1kr 1 399,00
*
Leveringstid ca. 14-21 dager. 1 stk. på lageret i USA
The 3-In-1 Case Mouth Cutter from Forster creates a perfectly aligned, consistent chamfer on the inside and outside of the case mouth to help ensure benchrest quality handloads. Installs easily over the existing cutter shaft on all Foster Original and Power Case trimmers. Chamfers the inside to a 14° angle that works for both VLD boat tail and standard bullets. Outside is chamfered to a 30° angle, plus is fully adjustable for chamfer length. Long lasting carbide blades hold edge indefinitely with proper care.
Mer...
3-In-1 Case Mouth Cutter fra Forster skaper en perfekt justert, konsistent avfasing på innsiden og utsiden av hylsemunningen for å bidra til å sikre benkeskyting av høy kvalitet. Monteres enkelt over den eksisterende kutterskaftet på alle Foster Original og Power Case trimmere. Avfaser innsiden til en 14° vinkel som fungerer for både VLD båthale og standardkuler. Utsiden er avfaset til en 30° vinkel, i tillegg er den fullt justerbar for avfasingslengde. Langvarige karbidblader holder kanten på ubestemt tid med riktig stell.
Mer...
Kundevurderinger for FORSTER PRODUCTS, INC. 0.308" PILOT, 3-IN-1 CASE MOUTH CUTTER
Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 5
Forster really knows how to help!(15.11.2015)
I rarely review stuff I buy online unless its really bad or really good. Up until now I have been trimming with the original Forster trimmer and power adapter. But hated HATED the chamfer deburring process with the paper weight looking thing. 30 cases and my hand was stiff. Unlike some reloading products this performs as advertised. Real time, and pain saver! The case mouth is sexy after a trim. I was skeptical about the price, but their ingenuity to make these processes easier earns the extra coin.
Perfect addition(26.06.2017)
I've owned a Forster Classic case trimmer for over 25 years and I've hand cranked it all that time. I just added a Forster Power Adapter and two 3 in one Case Mouth Cutters in .308 and .224. These cutters are outstanding. With cutting and chamfering the inside and outside of the case at one time I've saved a considerable amount time and effort. The end product is a perfectly trimmed case. With the power adapter there are no more blisters on my hand and the time of cutting is reduced. When the 3 in 1 is placed on the trimmer you will have to extend the cutting length of the trimmer. The rear collet can be unscrewed and moved further to the rear. On my Classic it appears that cases of the .308 length are about the maximum length that I can trim with the 30 caliber 3 in 1. I reload a lot of range brass in .223 and .308. This product is definitely a time and effort saver. Wish I would have installed this years ago. If you lost the instructions for your Classic cutter, as I have, Forster has instruction manuals for all their products online at their website.
Slick! Just slips over the existing cutter without damage to it. Trims, deburrs, and chamfers with the same effort as trimming alone. Loosen the set screw and remove to use the trimmer as before.
I have the .308 and .223 and plan to buy the .243.
I use the power adapter and its just plain fast. No need for an expensive solution now.
Perfection!(28.10.2010)
I purchased the .224 & .243 3-In-1 Case Mouth Cutters. I had my local machinest make a press fit adaptor for each one, so that I can use them on my RCBS Trim Pro Power Case Trimmer. Absolutely perfect trimming, & case mouth deburring inside & out! 2 less steps needed on my Case Mate station. I have tried the RCBS 3-In-1 cutters, but the burrs build up on the case mouth cutter so you need to constantly clean out the burrs to maintain perfect case mouth deburring. No burr buildup with the Forester 3-In-1 unit. The machinest bill was not cheap, but for the gain in case preperation speed, well worth the cost.
WORTH THE EXTRA MONE.(17.02.2011)
I TRIM LARGE QUANITIES OF .556 BRASS. THIS SAVES HOURS OF WORK AND LEAVES A GREAT FINISH. ALSO SINCLAIR IS CHEAPER THAN BUYING DIRECTLY FTOM FORSTER. JUST WISH FORSTER MADE IN 6.5MM.
Average Joe Review(12.04.2011)
This product is absolutely fantastic. I use this with the Forster original case trimmer. Preparing 223 brass to exactly 1.750 could not be any easier. You trim and chamfer the inside and outside of the case with just a few turns of the handle. You are done!! Average Joe review gives this product a buy recommendation, you will not be disappointed!!
223 3 in 1 cutter(22.01.2012)
This cutter is the best thing I have gotten in awhile! It saves alot of time and so far it trims, chamfers, and deburres perfectly. Couldn't get any better. I ordered this along with the Forster power adapter...perfect! I actually enjoy this part of reloading now as I dreaded this 3 part process of reloading. I didn't want to pay the price but I am very happy I did and well worth every penny.
Fantastic Tool(08.02.2012)
This is a fantastic tool. I installed it on my RCBS power case trimmer. The 3 in 1 head has a .490 female hole that slides over the rotating assembly of the RCBS case trimmer. The male end of the RCBS trimmer is .493 dia. I had to turn-sand .0035 from the end of the RCBS shaft so that the Forster head would slide on it, and then tighten the set screw and go to work. THe empty case has to be re-sized before attempting to use the 3 in 1 head. If the case isn't tight to the heads pilot, then the cut will be uneven. So, clean and prep your fired brass and the last step is trim to length. The 3 in 1 is already set from the factory, don't mess with it. The head will cut to length, chamfer and de-bur all in one easy stroke. This handy little tool saved me hours of work by combining all three cuts into one. I am annal about preciseness, this tool will leave you within .0005 tolerances. The Carbide cutters leave an almost polished finish. I've already recommended this to friends. I hate to see anyone waste time, this tool give time back.