Complete Pin & Spring Assortment For Standard & High Capacity
Every spring and pin you need to complete or rebuild a 1911 Auto or Officers ACP. Fits standard and high-capacity frames. Kit includes one each: mainspring cap, mainspring housing pin retainer, hammer strut pin, hammer pin, sear pin, mainspring cap pin, magazine catch lock, safety lock plunger assembly, barrel link pin, ejector pin, mainspring housing pin, mainspring and magazine-catch spring.
SPECS: Steel, blued, or stainless steel, matte finish.
Mer...
Komplett sortiment av pinner & fjærer for standard & høykapasitet
Alle fjærer og pinner du trenger for å fullføre eller bygge om en 1911 Auto eller Officers ACP. Passer standard og høykapasitetsrammer. Settet inkluderer én hver av: hovedfjærkappe, hovedfjærhuspinnholder, hammerstrutpinn, hammerpinn, avtrekkerpinn, hovedfjærkappepinn, magasinfangstlås, sikkerhetslåsplungerforsamling, løpslenkepinn, utstøterpinn, hovedfjærhuspinn, hovedfjær og magasinfjær.
SPECS: Stål, blånet, eller rustfritt stål, matt finish.
Mer...
Kundevurderinger for ED BROWN STAINLESS OFFICERS REBUILD KIT
Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 5
Good parts, well made(28.04.2014)
Bought this set to replace the original pins in a 1911 I was rebuilding. The sear/disconnector pin was a bit tight, otherwise no complaints at all. All working as they should.
What I need.(09.01.2017)
Used to repair customer's guns.
I worked with an old time Gunsmith for a few years over 35 years ago in a popular Gun and Law Enforcement supply shop located in Philadelphia. He taught me how to do what I now do part-time. Most importantly, when trying to get parts from a major gun manufacturer without timely results, Bill said and I quote: "never use those guys for parts. always call Brownells for this stuff. They're good at what they do, have the parts, and stuff just gets here faster." That's it. And it's still the same. Thanks!
M.V. - Philadelphia PA.
Gorgeous Polished Stainless Pins:(04.02.2010)
Beautifully, high-luster stainless steel pin set. All pins smooth and uniform, dimensionally accurate. Quality springs included. Hands down better than Wilson Combat.
Everything you need(09.07.2011)
Purchased this for a total rebuild of a Charles Daley. I duracoated in matte black and used all stainless parts for long durability and looks. this kit has every pin and spring needed to completely rebuild any 1911. The best part is that bought separately this would cost more and be easier to forget a part or two. great value from a great manufacturer. All parts fit perfect with little frustration getting the plunger pins on the plunger spring.
Excellent set(23.03.2013)
Bought this since I needed a hammer pin that was closer to being flush to the frame since the ambi safety I installed did not sit on a grooved hammer pin like the factory safety. Hammer pin, sear and disconnector pin, MSH pin, plunger spring, slide stop plunger, safety catch plunger, and MSH components (pin retainer, spring, cap, and cap pin) all fit in perfectly into the frame of my Kimber Warrior. Used this to build an Ed Brown MSH for my Warrior which also fit perfectly (the stainless chainlink with lanyard loop).
Great parts kit and all to spec(05.12.2013)
All the pins dropped in and it is within spec. Very useful part that I used to complete an STI frame.
Awesome(14.12.2016)
Ed Brown products to me are just like Wilson Combat, unsurpassed in quality, fit & function. Never had issues with either supplier.
And extremely reasonably priced.
Exceptional Quality(02.05.2011)
Excellent quality I've come to expect from Ed Brown. Pins are perfect and the springs are on par with Wolff's great quality.
Perfect(25.11.2011)
excelent.
One of the best rebuild kits out there(19.01.2012)
The parts are just perfect, they are made to specs
Produktnr.: 087814102 ED BROWN STAINLESS OFFICERS REBUILD KIT Produsentnr.: 8140FS800732814032 Alle fjærer og pinner du trenger for å fullføre eller bygge om en 1911 Auto eller Officers ACP. Passer standard og høykapasitetsrammer. Settet inkluderer én hver av: hovedfjærkappe, hovedfjærhuspinnholder, hammerstrutpinn, hammerpinn, avtrekkerpinn, hovedfjærkappepinn, magasinfangstlås, sikkerhetslåsplungerforsamling, løpslenkepinn, utstøterpinn, hovedfjærhuspinn, hovedfjær og magasinfjær.
549NOK4kr 549,00
*
Leveringstid ca. 14-21 dager. 4 stk. på lageret i USA
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 087814000 ED BROWN BLUE REBUILD KIT Produsentnr.: 814800732814001 Alle fjærer og pinner du trenger for å fullføre eller bygge om en 1911 Auto eller Officers ACP. Passer standard og høykapasitetsrammer. Settet inkluderer én hver av: hovedfjærkappe, hovedfjærhuspinnholder, hammerstrutpinn, hammerpinn, avtrekkerpinn, hovedfjærkappepinn, magasinfangstlås, sikkerhetslåsplungerforsamling, løpslenkepinn, utstøterpinn, hovedfjærhuspinn, hovedfjær og magasinfjær.
499NOK17kr 499,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 087814100 ED BROWN STAINLESS REBUILD KIT Produsentnr.: 814S800732814049 Alle fjærer og pinner du trenger for å fullføre eller bygge om en 1911 Auto eller Officers ACP. Passer standard og høykapasitetsrammer. Settet inkluderer én hver av: hovedfjærkappe, hovedfjærhuspinnholder, hammerstrutpinn, hammerpinn, avtrekkerpinn, hovedfjærkappepinn, magasinfangstlås, sikkerhetslåsplungerforsamling, løpslenkepinn, utstøterpinn, hovedfjærhuspinn, hovedfjær og magasinfjær.
499NOK64kr 499,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 087814101 ED BROWN BLUE OFFICERS REBUILD KIT Produsentnr.: 814OF800732814025 Alle fjærer og pinner du trenger for å fullføre eller bygge om en 1911 Auto eller Officers ACP. Passer standard og høykapasitetsrammer. Settet inkluderer én hver av: hovedfjærkappe, hovedfjærhuspinnholder, hammerstrutpinn, hammerpinn, avtrekkerpinn, hovedfjærkappepinn, magasinfangstlås, sikkerhetslåsplungerforsamling, løpslenkepinn, utstøterpinn, hovedfjærhuspinn, hovedfjær og magasinfjær.
549NOK4kr 549,00
*
Leveringstid ca. 14-21 dager. 4 stk. på lageret i USA
Complete Pin & Spring Assortment For Standard & High Capacity
Every spring and pin you need to complete or rebuild a 1911 Auto or Officers ACP. Fits standard and high-capacity frames. Kit includes one each: mainspring cap, mainspring housing pin retainer, hammer strut pin, hammer pin, sear pin, mainspring cap pin, magazine catch lock, safety lock plunger assembly, barrel link pin, ejector pin, mainspring housing pin, mainspring and magazine-catch spring.
SPECS: Steel, blued, or stainless steel, matte finish.
Mer...
Komplett sortiment av pinner & fjærer for standard & høykapasitet
Alle fjærer og pinner du trenger for å fullføre eller bygge om en 1911 Auto eller Officers ACP. Passer standard og høykapasitetsrammer. Settet inkluderer én hver av: hovedfjærkappe, hovedfjærhuspinnholder, hammerstrutpinn, hammerpinn, avtrekkerpinn, hovedfjærkappepinn, magasinfangstlås, sikkerhetslåsplungerforsamling, løpslenkepinn, utstøterpinn, hovedfjærhuspinn, hovedfjær og magasinfjær.
SPECS: Stål, blånet, eller rustfritt stål, matt finish.
Mer...
Kundevurderinger for ED BROWN STAINLESS OFFICERS REBUILD KIT
Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 5
Good parts, well made(28.04.2014)
Bought this set to replace the original pins in a 1911 I was rebuilding. The sear/disconnector pin was a bit tight, otherwise no complaints at all. All working as they should.
What I need.(09.01.2017)
Used to repair customer's guns.
I worked with an old time Gunsmith for a few years over 35 years ago in a popular Gun and Law Enforcement supply shop located in Philadelphia. He taught me how to do what I now do part-time. Most importantly, when trying to get parts from a major gun manufacturer without timely results, Bill said and I quote: "never use those guys for parts. always call Brownells for this stuff. They're good at what they do, have the parts, and stuff just gets here faster." That's it. And it's still the same. Thanks!
M.V. - Philadelphia PA.
Gorgeous Polished Stainless Pins:(04.02.2010)
Beautifully, high-luster stainless steel pin set. All pins smooth and uniform, dimensionally accurate. Quality springs included. Hands down better than Wilson Combat.
Everything you need(09.07.2011)
Purchased this for a total rebuild of a Charles Daley. I duracoated in matte black and used all stainless parts for long durability and looks. this kit has every pin and spring needed to completely rebuild any 1911. The best part is that bought separately this would cost more and be easier to forget a part or two. great value from a great manufacturer. All parts fit perfect with little frustration getting the plunger pins on the plunger spring.
Excellent set(23.03.2013)
Bought this since I needed a hammer pin that was closer to being flush to the frame since the ambi safety I installed did not sit on a grooved hammer pin like the factory safety. Hammer pin, sear and disconnector pin, MSH pin, plunger spring, slide stop plunger, safety catch plunger, and MSH components (pin retainer, spring, cap, and cap pin) all fit in perfectly into the frame of my Kimber Warrior. Used this to build an Ed Brown MSH for my Warrior which also fit perfectly (the stainless chainlink with lanyard loop).
Great parts kit and all to spec(05.12.2013)
All the pins dropped in and it is within spec. Very useful part that I used to complete an STI frame.
Awesome(14.12.2016)
Ed Brown products to me are just like Wilson Combat, unsurpassed in quality, fit & function. Never had issues with either supplier.
And extremely reasonably priced.
Exceptional Quality(02.05.2011)
Excellent quality I've come to expect from Ed Brown. Pins are perfect and the springs are on par with Wolff's great quality.
Perfect(25.11.2011)
excelent.
One of the best rebuild kits out there(19.01.2012)
The parts are just perfect, they are made to specs