Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

Installer 1911 mainspring housing enkelt med Ed Brown jig. 🛠️ Perfekt for Government, Commander og Officers modeller.

ED BROWN 1911 MAINSPRING HOUSING INSTALLATION JIG - ED BROWN INSTALLATION JIG

800732953007 087953000

Attributes

  • Finish: Stainless Steel
  • Make: 1911
  • Modell: Commander,Government,Officers
  • Leveringsvekt: 0,181kg
  • Frakthøyde: 20mm
  • Fraktbredde: 81mm
  • Fraktlengde: 140mm
  • UPC: 800732953007

Elementdetaljer

Made in USA
  • Spesifikasjoner:
  • Finish: Stainless Steel
  • Make: 1911
  • Modell: Government, Commander, Officers
1099 1099 1 NOK
1099 NOK kr 1 099

Priser inkl. mva. pluss levering

Produktnr.: 087953000

Produsentnr.: 953

800732953007 Lokaliser raskt og enkelt det nye ramme-hullet for bobtail-hus
På lager
1
2
3
4
5
6
7
8
9
10+
  • Spesifikasjoner:
  • Finish: Stainless Steel
  • Make: 1911
  • Modell: Government, Commander, Officers

Beskrivelse:

Vis original (engelsk)
Lokaliser raskt og enkelt det nye ramme-hullet for bobtail-hus

Attributes

  • Finish: Stainless Steel
  • Make: 1911
  • Modell: Commander,Government,Officers
  • Leveringsvekt: 0,181kg
  • Frakthøyde: 20mm
  • Fraktbredde: 81mm
  • Fraktlengde: 140mm
  • UPC: 800732953007

Elementdetaljer

Made in USA

Kundeanmeldelser

Kundevurderinger (6)

4,3 / 5
Ikke anbefalt

Brownells USA Useless 06.10.2016

absolutely useless, you spend $50 on something that does not give you any benefit at all, since you can use the actual part to be installed as reference. And using this jig to hold the frame while drilling, as depicted in one of the other comments, sure makes it difficult to line up frame true 90 degrees to drill.

Don't waste your money on this.

Klart anbefalt

Brownells USA Works! 17.07.2015

I shifted from the directions in that I did not use a #2 center drill which will cost you another 35 bucks. I used the 5/32" carbide bit in a drill press, used some cutting oil, and slowly cut the first hole. Cleaned the holes of metal chips, left the frame on the jig, and then cut the second hole by pressing the carbide bit thru the first hole, then thru the jig, and simply cut the second hole. No problems at all and no need to turn the frame over to do the opposite side. As long as your bit clears the jig on all sides you will cut perfect matching holes. Must have if building bobtail 1911s.











Tilbake til toppen