Replace a nicked or scuffed pad to present a neat appearance when magazine is seated in the gun. Original pad that comes on Ed’s 7-round magazines increases overall magazine length for positive seating, protects the magazine from damage, and makes inserting mag easier. .525" c-to-c hole spacing; includes two, 4-40, self-tapping screws per pad.
SPECS: Polymer, black. Fits Ed Brown 7-round magazines. Includes 6 pads and 12 screws.
Mer...
Taktisk kvalitet; Laget av Polymer
Erstatt en nicket eller skadet pute for å gi et pent utseende når magasinet er satt inn i våpenet. Den originale puten som kommer med Ed’s 7-runds magasiner øker den totale lengden på magasinet for sikker plassering, beskytter magasinet mot skader og gjør det enklere å sette inn magasinet. .525" c-to-c hullavstand; inkluderer to, 4-40, selvgjengende skruer per pute.
SPECS: Polymer, svart. Passer Ed Brown 7-runds magasiner. Inkluderer 6 puter og 12 skruer.
Mer...
Kundevurderinger for ED BROWN SCREW-ON BUMPER PADS, 6-PAK
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,1
Good But Be Careful(07.03.2010)
The base pads are nice, no complaints. The "self tapping" screws are not! Out of 3 pads I installed 3 screws stripped. 2 were my fault because I thought they were self tapping and my Shooting Star mags were not tapped. 1 screw still stripped on a tapped mag. Be careful, the screws are too soft. I've used CMC basepads in the past and they use actual "self tapping" screws.
Great pads, lousy(27.11.2010)
I too found the included "self taping" screws completely inadequate, they are just too soft.
Save some time and frustration and buy a 4-40 tap, #43 drill and machine screws for installation. The pads themselves are well made and time will tell just how durable they are, but the price for a 6 pack of bumper pads makes this an attractive buy.
Why We Need Them(13.03.2014)
Bumper pads are frequently over-looked because they are considered bulky & unnecessary for concealed carry. Actually, they help ensure that the magazine is fully seated in a speed reload & also gives you something to grab on if the mag jams. I drop my mags during a speed reload, so having a bumper between the base & the concrete doesn't hurt either.
These appear to be exactly identical to the ones factory furnished with a Sig 1911 Ultra Compact and identical to the Chip McCormick Shooting Star pads...they are NOT. When the front third of a pad cracked and fell off I thought I might have overtorqued the screws. Replacing the pad and very carefully tightening the screws resulted in another pad fracturing and separating (overnight, not immediately). Both times the mag was loaded but not fired. Not impressed! I'm installing the remaining pad...three usable out of six (so far)...not good odds. The factory pads and McCormick's pads have not failed.
Good bang for the buck(21.08.2014)
Have used these for years. No issues with conceal carry. Have had a couple break, but they aren't made to be abused. They work for what they are. Don't go for a bargain (which these are) and then complain. Great Product!!!
Not sure why so many negative reviews?(03.11.2014)
You can read a lot of bad reviews on midway, but the guys installing them must not have finesse or are gorillas. They screw into my stainless steel stock Metalform mags perfectly. No issues. It'll come to a point where you can feel resistance and then just stop. I didn't have one snap or break on me, and I didn't over tighten them. For the money, they're good. Try them on Metalform mags maybe???
Ed Brown 1911 bumper pads(13.01.2018)
I just purchased my first pack and only installed one on a Kimber 7-round 45 magazine. Installation couldnât be easier, the screws worked just fine. The screws should be a softer metal than the magazine screw holes so you donât strip the screw holes on the magazine. Donât over tighten the screws and use the right screwdriver and you should be fine.
They donât fit this magazine perfect but thatâs because of the magazine design not the bumper pad. The pad overhangs the front of the base plate creating a lip. I compared them to other bumper pads and they are the same size.
I ordered some new magazines and plan on using these bumper pads when the magazines arrive. Brownells price was excellent and shipping was fast. I wouldnât hesitate to order more if I needed them.
Produktnr.: 087807006 ED BROWN SCREW-ON BUMPER PADS, 6-PAK Produsentnr.: 807800732807003 Erstatt en nicket eller skadet pute for å gi et pent utseende når magasinet er satt inn i våpenet. Den originale puten som kommer med Ed’s 7-runds magasiner øker den totale lengden på magasinet for sikker plassering, beskytter magasinet mot skader og gjør det enklere å sette inn magasinet. .525" c-to-c hullavstand; inkluderer to, 4-40, selvgjengende skruer per pute.
439NOK0kr 439,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Spesifikasjoner:Farge: BlackMake: 1911Modell: Government, Commander, OfficersStyle: Base Pads
Erstatt nicket eller skadet pute for å opprettholde et pent utseende og beskytte magasinet.
Passer Ed Brown 7-runds magasiner og inkluderer 6 puter og 12 skruer.
Enkel å installere med .525" c-to-c hullavstand og selvgjengende skruer.
Attributes
Farge:
Black
Make:
1911
Modell:
Commander,Government,Officers
Style:
Base Pads
Leveringsvekt: 0,045kgFrakthøyde: 18mmFraktbredde: 56mmFraktlengde: 89mm
UPC
: 800732807003
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Oppgrader ditt 1911 magasin med Ed Brown bumper pads! ✨ Inkluderer 6 puter for perfekt passform og beskyttelse.
Replace a nicked or scuffed pad to present a neat appearance when magazine is seated in the gun. Original pad that comes on Ed’s 7-round magazines increases overall magazine length for positive seating, protects the magazine from damage, and makes inserting mag easier. .525" c-to-c hole spacing; includes two, 4-40, self-tapping screws per pad.
SPECS: Polymer, black. Fits Ed Brown 7-round magazines. Includes 6 pads and 12 screws.
Mer...
Taktisk kvalitet; Laget av Polymer
Erstatt en nicket eller skadet pute for å gi et pent utseende når magasinet er satt inn i våpenet. Den originale puten som kommer med Ed’s 7-runds magasiner øker den totale lengden på magasinet for sikker plassering, beskytter magasinet mot skader og gjør det enklere å sette inn magasinet. .525" c-to-c hullavstand; inkluderer to, 4-40, selvgjengende skruer per pute.
SPECS: Polymer, svart. Passer Ed Brown 7-runds magasiner. Inkluderer 6 puter og 12 skruer.
Mer...
Kundevurderinger for ED BROWN SCREW-ON BUMPER PADS, 6-PAK
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,1
Good But Be Careful(07.03.2010)
The base pads are nice, no complaints. The "self tapping" screws are not! Out of 3 pads I installed 3 screws stripped. 2 were my fault because I thought they were self tapping and my Shooting Star mags were not tapped. 1 screw still stripped on a tapped mag. Be careful, the screws are too soft. I've used CMC basepads in the past and they use actual "self tapping" screws.
Great pads, lousy(27.11.2010)
I too found the included "self taping" screws completely inadequate, they are just too soft.
Save some time and frustration and buy a 4-40 tap, #43 drill and machine screws for installation. The pads themselves are well made and time will tell just how durable they are, but the price for a 6 pack of bumper pads makes this an attractive buy.
Why We Need Them(13.03.2014)
Bumper pads are frequently over-looked because they are considered bulky & unnecessary for concealed carry. Actually, they help ensure that the magazine is fully seated in a speed reload & also gives you something to grab on if the mag jams. I drop my mags during a speed reload, so having a bumper between the base & the concrete doesn't hurt either.
These appear to be exactly identical to the ones factory furnished with a Sig 1911 Ultra Compact and identical to the Chip McCormick Shooting Star pads...they are NOT. When the front third of a pad cracked and fell off I thought I might have overtorqued the screws. Replacing the pad and very carefully tightening the screws resulted in another pad fracturing and separating (overnight, not immediately). Both times the mag was loaded but not fired. Not impressed! I'm installing the remaining pad...three usable out of six (so far)...not good odds. The factory pads and McCormick's pads have not failed.
Good bang for the buck(21.08.2014)
Have used these for years. No issues with conceal carry. Have had a couple break, but they aren't made to be abused. They work for what they are. Don't go for a bargain (which these are) and then complain. Great Product!!!
Not sure why so many negative reviews?(03.11.2014)
You can read a lot of bad reviews on midway, but the guys installing them must not have finesse or are gorillas. They screw into my stainless steel stock Metalform mags perfectly. No issues. It'll come to a point where you can feel resistance and then just stop. I didn't have one snap or break on me, and I didn't over tighten them. For the money, they're good. Try them on Metalform mags maybe???
Ed Brown 1911 bumper pads(13.01.2018)
I just purchased my first pack and only installed one on a Kimber 7-round 45 magazine. Installation couldnât be easier, the screws worked just fine. The screws should be a softer metal than the magazine screw holes so you donât strip the screw holes on the magazine. Donât over tighten the screws and use the right screwdriver and you should be fine.
They donât fit this magazine perfect but thatâs because of the magazine design not the bumper pad. The pad overhangs the front of the base plate creating a lip. I compared them to other bumper pads and they are the same size.
I ordered some new magazines and plan on using these bumper pads when the magazines arrive. Brownells price was excellent and shipping was fast. I wouldnât hesitate to order more if I needed them.
Hjelp og kontakt
(0) 
Nyhetsbrev
Klassisk visning
Mobilvisning