Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

EGW
1911 HEAVY DUTY SLIDE STOP

841370101528 296000120

Machines From Hardened Steel For Maximum Strength & Durability; Standard & Oversized Pins Available

Heavy duty slide stop is precision machined from steel bar stock, then heat-treated for superb hardness and durability. Ensures a precise fit to frame for secure, consistent lockup; prevents slop or “play” that can compromise accuracy. Available with standard .200" diameter pin or oversized .203" pin for custom fitting to ensure the tightest possible lockup for maximum accuracy. Both sizes available in blued 4140 carbon steel or stainless steel, both with a fine bead-blasted matte finish. Fine-line serrations on pad give your finger secure purchase to release the slide on the first pass.

SPECS: Carbon steel, matte blued (BL), or stainless steel (SS), matte finish. Pin diameter: .200" (5.1mm) or .203" (5.2mm). Calibers listed in table.

Mer...

Maskinert Fra Herdet Stål For Maksimal Styrke & Holdbarhet; Standard & Overdimensjonerte Pinner Tilgjengelig

Heavy duty slide stop er presisjonsmaskinert fra stangstål, deretter varmebehandlet for superb hardhet og holdbarhet. Sikrer en presis passform til rammen for sikker, konsistent låsing; forhindrer slark eller "spill" som kan kompromittere nøyaktigheten. Tilgjengelig med standard .200" diameter pinne eller overdimensjonert .203" pinne for tilpasset tilpasning for å sikre strammest mulig låsing for maksimal nøyaktighet. Begge størrelser er tilgjengelige i blånet 4140 karbonstål eller rustfritt stål, begge med en fin sandblåst matt finish. Fine linjeserreringer på puten gir fingeren et sikkert grep for å frigjøre sliden på første forsøk.

SPECS: Karbonstål, matt blånet (BL), eller rustfritt stål (SS), matt finish. Pinndiameter: .200" (5.1mm) eller .203" (5.2mm). Kalibre angitt i tabellen.

Mer...

Kundevurderinger for EGW .45 ACP, SS, .200"

Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 4,3

Worked better than I expected (22.03.2011)

Used this part in a Colt Series 80 that had developed some slop in the [frame] slide stop holes. The .203 oversize was ideal. This slide stop just fit my Wilson Combat .278 link so now the slide/barrel/frame time just right. I did not have to modify this part to install but is is possible if your link is near min spec you will need to hone the link hole.

Not Drop In (18.05.2014)

The quality of the slide stop is typical EGW but these are not drop in. You will have to file your barrel feet to make them fit.

Excellent part (14.10.2009)

These are a very high quality part. They utilize the traditional colt style pad which I like. I also like the fact that these are fully machined from solid steel vs. being cast. I will be using these from now on.

Highest Quality! (02.12.2013)

As Gunsmith, I use this Slide Stop (both CS and SSTL, 45acp and 9mm)exclusively on all of my Customer's pistols and my own. They always function perfectly and never fail. The pin is always 0.200", which is ideal for a great lock-up. Remember, you get what you pay for!!

not good for me (12.12.2014)

EGW generally has a fine product. The overall detail and machine work on this one was fine. The problem I had was the rear lug that meets the Mag follower was cut very different than from 1911 spec as well as any SS I had on hand to compare it with. Therefore, it would work with some mags (as far as holding the slide back when empty) but definitely would not with other mags (mostly the older style). Measuring the rear lug from the bottom was .2035 long. The others I had were .2065. Not much of a difference, but the contours were definitely different and maybe that's the problem.The shaft was a perfect .200 though!

para parts made out mim sloppy parts (22.02.2016)

my slide stop pin egg shaped .194 to .198 good old mim parts now nice and tight

Les 6 flere anmeldelser fra brownells.com

1049 1049 8 NOK

Produktnr.: 296000120
EGW .45 ACP, SS, .200"
Produsentnr.: 11003 841370101528 Heavy duty slide stop er presisjonsmaskinert fra stangstål, deretter varmebehandlet for superb hardhet og holdbarhet. Sikrer en presis passform til rammen for sikker, konsistent låsing; forhindrer slark eller "spill" som kan kompromittere nøyaktigheten. Tilgjengelig med standard .200" diameter pinne eller overdimensjonert .203" pinne for tilpasset tilpasning for å sikre strammest mulig låsing for maksimal nøyaktighet. Begge størrelser er tilgjengelige i blånet 4140 karbonstål eller rustfritt stål, begge med en fin sandblåst matt finish. Fine linjeserreringer på puten gir fingeren et sikkert grep for å frigjøre sliden på første forsøk.

1049 NOK 17 kr 1 049,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Finish: Stainless Steel Kaliber: 45 Caliber (.451-.454) Make: 1911 Modell: Government, Commander, Officers

EGW 1911 HEAVY DUTY SLIDE STOP

Kundevurderinger for EGW .45 ACP, SS, .200"

Top takeaways

Attributes

Elementdetaljer

Kundevurderinger for EGW .45 ACP, SS, .200"

Koble til

Sikre betalingsmåter

Bransjeorganisasjoner

Velkommen!

EGW
1911 HEAVY DUTY SLIDE STOP