The last bit of extra weight has been stripped away for minimum weight and faster locktime. Machined from A-2 tool steel or Stainless Steel and hardened for superior strength and long life. Sear engagement hooks pre-cut to .020" height and ground; ready to polish. Rebated width on half-cock prevents sear nose damage. Combat-style spur is serrated for fast, easy thumb grip. Narrowed body can't interfere with slide travel.
SPECS: Stainless steel (S/S) or A-2 steel, heat treated to Rc 48-52. Fits Series 70 and 80. Minor fitting required.
Mer...
"Skeletonisert" design, langvarig stål
Den siste biten av ekstra vekt er fjernet for minimal vekt og raskere låsetid. Maskinert fra A-2 verktøystål eller rustfritt stål og herdet for overlegen styrke og lang levetid. Sear-engasjement kroker forhåndskutt til 0,020" høyde og slipt; klar til å poleres. Redusert bredde på halv-cock forhindrer skade på sear-nesen. Combat-stil spur er serrert for raskt og enkelt tommelgrep. Innsnevret kropp kan ikke forstyrre slidenes bevegelse.
SPECS: Rustfritt stål (S/S) eller A-2 stål, varmebehandlet til Rc 48-52. Passer til Series 70 og 80. Mindre tilpasning nødvendig.
Mer...
Kundevurderinger for WILSON COMBAT S/S ULTRALIGHT HAMMER
Antall vurderinger: 14
Fra brownells.com: 14
Gjennomsnittsvurdering: 4,6
I Love It(30.05.2011)
A true drop-in hammer for my RIA 1911MS. This piece was a piece of cake to install, and required NO FITTING! The biggest hassle was swapping over the hammer strut, and even that only took a minute with a small punch and a gunsmith's hammer. This hammer looks great and feels great. I paired it up with a Wilson ultralight skeletonized hammer ans a Wilson Combat SS Beavertail Safety.
Tried and true over the years...(15.08.2012)
I had used this hammer on a Springfield I owned years ago and liked it. Fourteen years later, I bought another to install on my new Springfield TRP which already had a great factory trigger job but I wanted to create a new trigger group for IPSC competition and leave the original group intact.
The hammer was nearly exactly the same as the piece I bought years ago. Perfect angles and hammer hook height, polished and perfectly square. The exterior edges are sharp-edged but easily melted to one's preference using a green or grey cylindrical Dremel polishing stick.
What I like second best about this hammer is the minimal hammer movement after the slide cocking - very little chance for sear bounce on a light trigger. What I like best is that it is a superb blend of art and function.
ANOTHER GREAT PRODUCT FROM WILSON!(06.01.2014)
This hammer dropped right in with no fitting required! Much nicer that the hammer that came on my 70 series Colt Commander.
Excellent part(16.10.2009)
If you want the absolute cleanest, crispest, creep free trigger that can be had then this is your hammer. The only reason that I didn't give it 5 stars is that Wilson does not bevel any of the edges on this hammer. It takes a while to bevel all of the edges on this hammer which is a real pain. Other than that this hammer (in combination with the Wilson A2 sear) when properly set up can give you the cleanest crispest creep free trigger that can be had.
Ultra smooth trigger pull!(09.11.2009)
I agree with the other post, when you team this hammer up with the Wilson A2 sear, your gun with function ultra smooth! Made a considerable difference in my gun! Spend the extra money on barstock, and buy this hammer!
the bomb(26.02.2010)
this hammer rocks. dropped it into my springer with the a2 sear and now i have a 3.5#, creep free trigger pull.
Looks great and is easy to install.(08.03.2010)
If you can detail strip your 1911 you can put this hammer in without a problem. Looks great works perfect.
Excellent product(27.10.2010)
Purchased this hammer for a para p14 project. This hammer worked perfectly with the Wilson sear purchased at the same time. No creep, clean break. It doesnt get any better.
add a little stoneing to polish(16.02.2011)
Polished the fingers and used with a wilson Sear and wolff spring for a great triger in a PT 1911
remington r1(26.04.2011)
no problems installing on remington 1911 r1. used with wilson bulletproof a2 sear and bulletproof sear spring, drop-in beavertail and comp match trigger. awesome setup, works perfect
Jams My Series 80 Colt MKIV Gold Cup NM(07.08.2012)
My brother bought this for me together with 965-429-101 Grip safety. I uninstalled both when my gun Series 80 Colt MKIV Gold Cup NM had 2 to 3 jams using a standard 230 grain FMJ.
The product quality is good but I think it should not be installed for the pistol mentioned above.
Good Fit(30.03.2013)
This was a drop in fit for my Delta Elite.
Great SS Ultralight Hammer(04.01.2016)
I polished the sides of the hammer just to get rid of some tool marks. Dropped right in and functions flawlessly with the Deluxe Match Grade Sear and that I also purchased and installed into my Springfield Armory GI 1911-A1.
This is the second one I bought. Installed it in my Colt Combat Elite with a WC bulletproof sear, it added 1/4 to a 3.5 Lb trigger pull, but it is super crisp so you don't feel it. Swapped it out to my Kimber Super match 45. Consistent and crisp pull at 3.5LBs, better feel than my Colt. Swapped it on to my Kimber Team Match 9mm, somehow, trigger pull is 4 LBs but had a very very slight drag when the trigger is pulled slowly. I recommend this product. By the way, no polishing of any sort was done to the sear or hammer.
Produktnr.: 965337001 WILSON COMBAT S/S ULTRALIGHT HAMMER Produsentnr.: 337S874218001087 Den siste biten av ekstra vekt er fjernet for minimal vekt og raskere låsetid. Maskinert fra A-2 verktøystål eller rustfritt stål og herdet for overlegen styrke og lang levetid. Sear-engasjement kroker forhåndskutt til 0,020" høyde og slipt; klar til å poleres. Redusert bredde på halv-cock forhindrer skade på sear-nesen. Combat-stil spur er serrert for raskt og enkelt tommelgrep. Innsnevret kropp kan ikke forstyrre slidenes bevegelse.
1349NOK1kr 1 349,00
*
Leveringstid ca. 14-21 dager. 1 stk. på lageret i USA
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 965337002 WILSON COMBAT ULTRALIGHT HAMMER Produsentnr.: 337B874218001070 Den siste biten av ekstra vekt er fjernet for minimal vekt og raskere låsetid. Maskinert fra A-2 verktøystål eller rustfritt stål og herdet for overlegen styrke og lang levetid. Sear-engasjement kroker forhåndskutt til 0,020" høyde og slipt; klar til å poleres. Redusert bredde på halv-cock forhindrer skade på sear-nesen. Combat-stil spur er serrert for raskt og enkelt tommelgrep. Innsnevret kropp kan ikke forstyrre slidenes bevegelse.
1249NOK0kr 1 249,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Oppdag 1911 ULTRALIGHT HAMMER fra WILSON COMBAT! ⚙️ Lettvektsdesign for raskere låsetid og overlegen styrke. Perfekt for din pistol!
The last bit of extra weight has been stripped away for minimum weight and faster locktime. Machined from A-2 tool steel or Stainless Steel and hardened for superior strength and long life. Sear engagement hooks pre-cut to .020" height and ground; ready to polish. Rebated width on half-cock prevents sear nose damage. Combat-style spur is serrated for fast, easy thumb grip. Narrowed body can't interfere with slide travel.
SPECS: Stainless steel (S/S) or A-2 steel, heat treated to Rc 48-52. Fits Series 70 and 80. Minor fitting required.
Mer...
"Skeletonisert" design, langvarig stål
Den siste biten av ekstra vekt er fjernet for minimal vekt og raskere låsetid. Maskinert fra A-2 verktøystål eller rustfritt stål og herdet for overlegen styrke og lang levetid. Sear-engasjement kroker forhåndskutt til 0,020" høyde og slipt; klar til å poleres. Redusert bredde på halv-cock forhindrer skade på sear-nesen. Combat-stil spur er serrert for raskt og enkelt tommelgrep. Innsnevret kropp kan ikke forstyrre slidenes bevegelse.
SPECS: Rustfritt stål (S/S) eller A-2 stål, varmebehandlet til Rc 48-52. Passer til Series 70 og 80. Mindre tilpasning nødvendig.
Mer...
Kundevurderinger for WILSON COMBAT S/S ULTRALIGHT HAMMER
Antall vurderinger: 14
Fra brownells.com: 14
Gjennomsnittsvurdering: 4,6
I Love It(30.05.2011)
A true drop-in hammer for my RIA 1911MS. This piece was a piece of cake to install, and required NO FITTING! The biggest hassle was swapping over the hammer strut, and even that only took a minute with a small punch and a gunsmith's hammer. This hammer looks great and feels great. I paired it up with a Wilson ultralight skeletonized hammer ans a Wilson Combat SS Beavertail Safety.
Tried and true over the years...(15.08.2012)
I had used this hammer on a Springfield I owned years ago and liked it. Fourteen years later, I bought another to install on my new Springfield TRP which already had a great factory trigger job but I wanted to create a new trigger group for IPSC competition and leave the original group intact.
The hammer was nearly exactly the same as the piece I bought years ago. Perfect angles and hammer hook height, polished and perfectly square. The exterior edges are sharp-edged but easily melted to one's preference using a green or grey cylindrical Dremel polishing stick.
What I like second best about this hammer is the minimal hammer movement after the slide cocking - very little chance for sear bounce on a light trigger. What I like best is that it is a superb blend of art and function.
ANOTHER GREAT PRODUCT FROM WILSON!(06.01.2014)
This hammer dropped right in with no fitting required! Much nicer that the hammer that came on my 70 series Colt Commander.
Excellent part(16.10.2009)
If you want the absolute cleanest, crispest, creep free trigger that can be had then this is your hammer. The only reason that I didn't give it 5 stars is that Wilson does not bevel any of the edges on this hammer. It takes a while to bevel all of the edges on this hammer which is a real pain. Other than that this hammer (in combination with the Wilson A2 sear) when properly set up can give you the cleanest crispest creep free trigger that can be had.
Ultra smooth trigger pull!(09.11.2009)
I agree with the other post, when you team this hammer up with the Wilson A2 sear, your gun with function ultra smooth! Made a considerable difference in my gun! Spend the extra money on barstock, and buy this hammer!
the bomb(26.02.2010)
this hammer rocks. dropped it into my springer with the a2 sear and now i have a 3.5#, creep free trigger pull.
Looks great and is easy to install.(08.03.2010)
If you can detail strip your 1911 you can put this hammer in without a problem. Looks great works perfect.
Excellent product(27.10.2010)
Purchased this hammer for a para p14 project. This hammer worked perfectly with the Wilson sear purchased at the same time. No creep, clean break. It doesnt get any better.
add a little stoneing to polish(16.02.2011)
Polished the fingers and used with a wilson Sear and wolff spring for a great triger in a PT 1911
remington r1(26.04.2011)
no problems installing on remington 1911 r1. used with wilson bulletproof a2 sear and bulletproof sear spring, drop-in beavertail and comp match trigger. awesome setup, works perfect
Jams My Series 80 Colt MKIV Gold Cup NM(07.08.2012)
My brother bought this for me together with 965-429-101 Grip safety. I uninstalled both when my gun Series 80 Colt MKIV Gold Cup NM had 2 to 3 jams using a standard 230 grain FMJ.
The product quality is good but I think it should not be installed for the pistol mentioned above.
Good Fit(30.03.2013)
This was a drop in fit for my Delta Elite.
Great SS Ultralight Hammer(04.01.2016)
I polished the sides of the hammer just to get rid of some tool marks. Dropped right in and functions flawlessly with the Deluxe Match Grade Sear and that I also purchased and installed into my Springfield Armory GI 1911-A1.
This is the second one I bought. Installed it in my Colt Combat Elite with a WC bulletproof sear, it added 1/4 to a 3.5 Lb trigger pull, but it is super crisp so you don't feel it. Swapped it out to my Kimber Super match 45. Consistent and crisp pull at 3.5LBs, better feel than my Colt. Swapped it on to my Kimber Team Match 9mm, somehow, trigger pull is 4 LBs but had a very very slight drag when the trigger is pulled slowly. I recommend this product. By the way, no polishing of any sort was done to the sear or hammer.