Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

BROWNELLS
1911 TRIGGER STIRRUP DIE

050806104143 080710045

Forms Stirrup For Precise Trigger Pull

Makes it easy to smooth out the bends and bumps found in production triggers and match-fit them for precise, no-wobble travel. Slide a trigger over the die and tap lightly around it with a small hammer. Maintains correct shape and angles. Dual use, lets you save dinged and damaged ones too.

SPECS: Hardened Steel. Single-Stack - 1-15⁄16" (23.8mm) long, 5⁄8" (15.9mm) thick, 1½" (3.8cm) high.

Mer...

Former bøylen for presis avtrekkskraft

Gjør det enkelt å glatte ut bøyninger og ujevnheter som finnes i produksjonstriggere og tilpasse dem for presis, uten slingring. Skyv en trigger over verktøyet og bank lett rundt den med en liten hammer. Opprettholder korrekt form og vinkler. Dobbelt bruk, lar deg også redde skadede og ødelagte deler.

SPECS: Herdet stål. Enkeltradet - 1-15⁄16" (23.8mm) lang, 5⁄8" (15.9mm) tykk, 1½" (3.8cm) høy.

Mer...

Kundevurderinger for BROWNELLS 1911 SINGLE-STACK TRIGGER STIRRUP DIE

Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 4

Worth the price (18.12.2009)

I tried for a few trigger jobs to place my fingers inside the stirrup to perform the stone work. Each time I ended up with a less than perfect stirrup, which I had to tweak to straighten back for a uniform contact to the trigger track. All of that changed when I bought this jig. It has enough length to fit in your vise, and the best part about this jig is that it will work with any range of LOP. If you do get a trigger that has a bowed/narrowed stirrup the die is solid steel so a few taps from the plastic coated hammer fixes it with no problem. While you are at it, take a look at the track. If it is not smooth, all the stirrup work you did will be for nothing if the track is rough. Brownells has a track stone that is worth looking at.
Hope this helps, that's my $.02

Simple, effective, easy to use (21.05.2011)

Got this to fix a less then perfect trigger job and it worked great. A few taps with a nylon hammer and the little waves that ran through my trigger bow were gone. Great for touch ups or if planning to drop in a new trigger.

A great paperweight (04.04.2012)

On paper, this tool seems like a great idea - the ability to re-shape a trigger bow. The problem is that if a trigger has been damaged or bent, it is almost impossible to restore it to its original shape. The hard trigger bow steel is springy and does not simply re-form itself to the die with a few hammer taps. In fact, hammering the trigger bow will stretch the metal and distort it even further. No two 1911 frames are alike. That's why you have to fit each trigger separately. If you have a damaged trigger bow, the only real solution is to replace the trigger.

excellent product amazing!!! awesome!!!! (21.06.2012)

I tried the stirrup on a oem norinco trigger bow. I had to tap it down to conform to the stirrup and tapped it with a brass hammer. It is so easy to use and gets your trigger bow back in line I didn' have any problems of any sort using this stirrup. I should have gotten this stirrup long ago. Excellent is all I have to say about this stirrup.

Does the job! (22.11.2012)

Just follow instructions and you're in the ball park; use trigger track stone to smooth frame. Polish bow and you're done. Without this die, you're in for a lot of work, if not impossible!

Les 5 flere anmeldelser fra brownells.com

599 599 1 NOK

Produktnr.: 080710045
BROWNELLS 1911 SINGLE-STACK TRIGGER STIRRUP DIE 050806104143 Gjør det enkelt å glatte ut bøyninger og ujevnheter som finnes i produksjonstriggere og tilpasse dem for presis, uten slingring. Skyv en trigger over verktøyet og bank lett rundt den med en liten hammer. Opprettholder korrekt form og vinkler. Dobbelt bruk, lar deg også redde skadede og ødelagte deler.

599 NOK 34 kr 599,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: 1911 Modell: Government, Commander, Officers

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Forenkler utjevning av bøyninger og ujevnheter i produksjonstriggere, samt tilpasning for presis bruk uten slingring.
Kan også brukes til å redde skadede og ødelagte deler ved å opprettholde korrekt form og vinkler.
Lagret av herdet stål og er kompatibel med 1911 Government, Commander og Officers modeller.

Attributes

Make: 1911 Modell: Commander,Government,Officers Leveringsvekt: 0,159kg Frakthøyde: 15mm Fraktbredde: 69mm Fraktlengde: 140mm UPC : 050806104143

Elementdetaljer

Made in USA

Få presisjon med 1911 Trigger Stirrup Die! 🛠️ Glatt ut produksjonstriggere og reduser skader enkelt med dette robuste verktøyet.

Forms Stirrup For Precise Trigger Pull

SPECS: Hardened Steel. Single-Stack - 1-15⁄16" (23.8mm) long, 5⁄8" (15.9mm) thick, 1½" (3.8cm) high.

Mer...

Former bøylen for presis avtrekkskraft

SPECS: Herdet stål. Enkeltradet - 1-15⁄16" (23.8mm) lang, 5⁄8" (15.9mm) tykk, 1½" (3.8cm) høy.

Mer...

Kundevurderinger for BROWNELLS 1911 SINGLE-STACK TRIGGER STIRRUP DIE

Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 4

Worth the price (18.12.2009)

Simple, effective, easy to use (21.05.2011)

A great paperweight (04.04.2012)

excellent product amazing!!! awesome!!!! (21.06.2012)

Does the job! (22.11.2012)

Just follow instructions and you're in the ball park; use trigger track stone to smooth frame. Polish bow and you're done. Without this die, you're in for a lot of work, if not impossible!

Les 5 flere anmeldelser fra brownells.com