Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

CYLINDER & SLIDE
1911 AUTO MIL-SPEC RECOIL SPRING PLUG

000000004374 206000042

Screws Onto Recoil Spring To Prevent Loss Of Plug During Disassembly

Machined steel recoil plug has mil-spec flange punched into the side so the recoil spring can be wound into the plug before seating in the slide. Prevents the plug from flying off spring during field stripping and getting lost or hitting the operator, possibly causing injury. Precision-turned for proper fit in full-size Government model pistols, with flat, diamond-pattern knurling on the front. If you lose the plug, your gun can t operate, and you re done for the day. Keep one or two of these in your range box or field maintenance kit for backup.

SPECS: Steel, blued. 1½ (3.8cm) long, .495 (12.6mm) O.D. Fits mil-spec Government model.

Mer...

Skruer På Rekylfjæren For Å Forhindre Tap Av Plugg Under Demontering

Maskinert stålrekyldemperplugg har mil-spec flens stanset inn på siden slik at rekylfjæren kan vikles inn i pluggen før den settes i sleiden. Forhindrer at pluggen flyr av fjæren under feltstripping og blir borte eller treffer operatøren, noe som kan forårsake skade. Nøyaktig dreid for riktig passform i fullstørrelse Government-modellpistoler, med flatt, diamantmønstret rifling på fronten. Hvis du mister pluggen, kan ikke våpenet ditt operere, og dagen din er over. Ha en eller to av disse i skyteboksen eller feltvedlikeholdssettet ditt som backup.

SPESIFIKASJONER: Stål, blånet. 1½ (3.8cm) lang, .495 (12.6mm) ytre diameter. Passer mil-spec Government-modell.

Mer...

Kundevurderinger for CYLINDER & SLIDE MIL-SPEC RECOIL SPRING PLUG

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,7

This plug Rocks (23.08.2009)

This is the plug all 1911s should have. Just like John Moses Browning intended. The key is the flange that allows the recoil spring to screw into the plug, keeping the plug in place when field stripping your 1911. No more flying plugs, and no more crawling on the floor in the corner to retrieve it. Add to that the typical high quality and beautifully done checkering, and you have the plug that should have come in your 1911 to begin with. There is one downside, no stainless steel. Are you listening Bill?

EXCELLENT REPLACEMENT!!! (23.03.2010)

Dont wait. Order it now and replace that nasty Springfield government one it came with. This item is perfect and fits a heck of alot better than the factory part.

Flange works great (18.11.2011)

The punched flange allows you to "screw" the recoil spring on to the plug so that when you go to field strip, the plug is less likely to go airborn. I like the old-school look of the diamond knurling and it looks great my TRP. The fact that it comes from Cylinder and Slide means it's top-notch.

Great Idea! (17.12.2011)

This is a great recoil spring plug. Anyone who has ever accidentally launched one across the room while disassembling a 1911 will immediately appreciate this product. Too bad Cylinder & Slide doesn't make them for the Combat Commander. I'm going to have to trim the last one I ordered with a tubing cutter to use it in my Commander.

Original Spec is Still the Best (27.10.2013)

This plug captures the recoil spring, just as the original 1911 plans specified, making field stripping easier by keeping parts together.

Somehow this thoughtful detail isn't standard anymore, even with higher end 1911s. But at least replacing your recoils spring plug with this part is easy and inexpensive.

Bluing is very dark, almost black.

Looks nice (02.10.2014)

I had planned to replace the full length guide rod & plug in my RIA 1911, since it makes field stripping a PITA. The C&S part looked fantastic with a nice satin blued finish. Then I measured it with my digital micrometer. The ordinance specifications for the recoil plug is 0.4985"+0/-0.005". The C&S part measured 0.4946-0.4957". So the plug is in spec, but a bit egg shaped.

Worth 3 times the money (15.05.2015)

I've purchased 2 of these. One is in my 1911 Government model and one is in my Commander.

The one for the Commander was easily trimmed down to length with a standard tubing cutter.

These plugs make it so much easier to field strip with out the possibility of having to chase the plug all over the place.

Les 7 flere anmeldelser fra brownells.com

0 0 1 NOK

Produktnr.: 206000042
CYLINDER & SLIDE MIL-SPEC RECOIL SPRING PLUG
Produsentnr.: CS0437 000000004374 Maskinert stålrekyldemperplugg har mil-spec flens stanset inn på siden slik at rekylfjæren kan vikles inn i pluggen før den settes i sleiden. Forhindrer at pluggen flyr av fjæren under feltstripping og blir borte eller treffer operatøren, noe som kan forårsake skade. Nøyaktig dreid for riktig passform i fullstørrelse Government-modellpistoler, med flatt, diamantmønstret rifling på fronten. Hvis du mister pluggen, kan ikke våpenet ditt operere, og dagen din er over. Ha en eller to av disse i skyteboksen eller feltvedlikeholdssettet ditt som backup.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Make: 1911 Modell: Government

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Rekyldemperplugg i maskinert stål med mil-spec flens som sikrer at rekylfjæren holdes på plass under feltstripping.
Designet for nøyaktig passform i fullstørrelse Government-modellpistoler, med flatt, diamantmønstret rifling på fronten.
Viktig å ha som backup i skyteboksen eller feltvedlikeholdssettet for å forhindre at våpenet blir ubrukelig hvis pluggen går tapt.

Attributes

Make: 1911 Modell: Government Leveringsvekt: 0,009kg Fraktbredde: 83mm Fraktlengde: 146mm UPC : 000000004374

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Oppgrader din 1911 AUTO MIL-SPEC med en pålitelig rekyldemperplugg 🔧. Forhindrer tap og skader under feltstripping. Ha alltid en backup!

Screws Onto Recoil Spring To Prevent Loss Of Plug During Disassembly

SPECS: Steel, blued. 1½ (3.8cm) long, .495 (12.6mm) O.D. Fits mil-spec Government model.

Mer...

Skruer På Rekylfjæren For Å Forhindre Tap Av Plugg Under Demontering

SPESIFIKASJONER: Stål, blånet. 1½ (3.8cm) lang, .495 (12.6mm) ytre diameter. Passer mil-spec Government-modell.

Mer...

Kundevurderinger for CYLINDER & SLIDE MIL-SPEC RECOIL SPRING PLUG

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,7

This plug Rocks (23.08.2009)

EXCELLENT REPLACEMENT!!! (23.03.2010)

Dont wait. Order it now and replace that nasty Springfield government one it came with. This item is perfect and fits a heck of alot better than the factory part.

Flange works great (18.11.2011)