Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

CYLINDER & SLIDE
1911 LONG ALUMINUM TRIGGER

000000001816 206000033

Helps Ensure Correct Finger Placement For Best Accuracy

Long, aluminum, trigger shoe helps ensure proper placement of the index finger so pull force is directed straight rearward, preventing disturbance to sight alignment for improved accuracy. Shoe is permanently staked and drilled in a 3-hole configuration to keep weight to a minimum. Fine line serrations on the face provide a positive feel and help improve overall trigger control. Highly polished, stainless steel bow prevents trigger-flex and eliminates drag. Overtravel stop screw allows adjustments for creep. Gunsmith fitting required.

SPECS: Shoe Aluminum, silver, anodized finish. Bow Stainless steel, polished finish. 2.40 (6.1cm) OAL.

Mer...

Bidrar til Korrekt Fingerplassering for Best Mulig Nøyaktighet

Lang, aluminium, triggersko hjelper til med å sikre riktig plassering av pekefingeren slik at trekkraften er rettet rett bakover, noe som forhindrer forstyrrelser i siktelinjejusteringen for forbedret nøyaktighet. Skoen er permanent festet og boret i en 3-hulls konfigurasjon for å holde vekten nede. Fine linjeserreringer på fronten gir en positiv følelse og bidrar til å forbedre generell avtrekkskontroll. En høypolert bue av rustfritt stål forhindrer avtrekksfleks og eliminerer friksjon. Overtravel stoppskrue tillater justeringer for kryp. Våpensmedmontering kreves.

SPECS: Sko av aluminium, sølv, anodisert finish. Bue av rustfritt stål, polert finish. 2.40 (6.1cm) OAL.

Mer...

Kundevurderinger for CYLINDER & SLIDE LONG ALUMINUM TRIGGER

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,9

The PERFECT TRIGGER FOR YOUR 1911 (09.04.2011)

The Trigger is very easy to fit to your 1911 frame. Make sure you take your time for a proper fit. By making sure the top and bottom of the shoe is fitted to your frame you insure that your will have a clean crisp trigger pull.

Any Trigger that is make it into the Specs for the USMC M45 Combat Pistol is a Great Trigger and the CS181 was choosen by the Armorers that Build the USMC MEU SOC Pistol.

Excellent quality and function (08.06.2011)

This is an excellent trigger that functions and looks great. Installation required only minor fitting. I could'nt be happier with the results. I installed this trigger on a Colt Delta Elite 10mm and this was a great improvement over the factory trigger. Based on my experience, I would'nt hesitate to buy any Cylinder & Slide product.

Good feel (27.08.2011)

This trigger dropped right in to my Springfield G.I. without any fitting. It still has a lot less movement than what the factory trigger did but it could have been a little larger so I could have fit it to my frame. The serrations do give a good positive feel on the finger.

Required a little fitting, but worth it. (06.01.2012)

Other than having to remove .050 thousandths of an inch from the top to bottom measurement to make it fit in my mil-spec SA 1911 A1, the trigger looks great and performs flawlessly!

Incredible product (25.04.2012)

Great fit on my Springfield GI government model. No fitting required, no play at all.

Required fitting but it's good (03.08.2012)

This trigger required about one hour work for fitting in my Norinco but works well and looks great.

Perfect (23.09.2012)

Couldnt have asked for a better product. No fitting required, just polished the rear with some 600 and stoned a few edges. smooth as silk! Over travel adjusts easy but stays put!

Almost Drop In Rock Island FS Tac II 9mm (06.02.2014)

Perfect fit in my RIA FS Tactical II 9mm. I was lazy and it was cold outside (where any file was located) so I has a previously used (for wet sanding) small sqaure of wet/dry 400 grit, so I used it to take about .01 total between top and bottom just until trigger would fall in and out. Virtually no verticle slop, no horizontal slop. While bar was more polished than stock, I used a little metal polish on sides and back and very lighty oiled. Very nice crisp break with little pre-travel. Highly recommend.

Les 8 flere anmeldelser fra brownells.com

599 599 1 NOK

Produktnr.: 206000033
CYLINDER & SLIDE LONG ALUMINUM TRIGGER
Produsentnr.: CS0181 000000001816 Lang, aluminium, triggersko hjelper til med å sikre riktig plassering av pekefingeren slik at trekkraften er rettet rett bakover, noe som forhindrer forstyrrelser i siktelinjejusteringen for forbedret nøyaktighet. Skoen er permanent festet og boret i en 3-hulls konfigurasjon for å holde vekten nede. Fine linjeserreringer på fronten gir en positiv følelse og bidrar til å forbedre generell avtrekkskontroll. En høypolert bue av rustfritt stål forhindrer avtrekksfleks og eliminerer friksjon. Overtravel stoppskrue tillater justeringer for kryp. Våpensmedmontering kreves.

599 NOK 4 kr 599,00 *

Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA

Spesifikasjoner: Finish: Silver Make: 1911 Modell: Government, Commander, Officers Style: Curved, Long, Solid

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Lang, aluminium triggersko sikrer riktig plassering av pekefingeren for forbedret nøyaktighet og avtrekkskontroll.
Permanent festet og boret i en 3-hulls konfigurasjon for lav vekt, med fine linjeserreringer for positiv følelse.
Høypolert rustfritt stål bue forhindrer avtrekksfleks og eliminerer friksjon; justerbar overtravel stoppskrue for krypjusteringer.

Attributes

Finish: Silver Make: 1911 Modell: Commander,Government,Officers Style: Curved,Long,Solid Leveringsvekt: 0,014kg Frakthøyde: 8mm Fraktbredde: 79mm Fraktlengde: 157mm UPC : 000000001816

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.c

Forbedre avtrekkskontrollen med 1911 LONG ALUMINUM TRIGGER! 🌟 Denne lette, solide utløseren gir nøyaktighet og komfort.

Helps Ensure Correct Finger Placement For Best Accuracy

SPECS: Shoe Aluminum, silver, anodized finish. Bow Stainless steel, polished finish. 2.40 (6.1cm) OAL.

Mer...

Bidrar til Korrekt Fingerplassering for Best Mulig Nøyaktighet

SPECS: Sko av aluminium, sølv, anodisert finish. Bue av rustfritt stål, polert finish. 2.40 (6.1cm) OAL.

Mer...

Kundevurderinger for CYLINDER & SLIDE LONG ALUMINUM TRIGGER

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,9

The PERFECT TRIGGER FOR YOUR 1911 (09.04.2011)

Excellent quality and function (08.06.2011)

Good feel (27.08.2011)

Required a little fitting, but worth it. (06.01.2012)

Other than having to remove .050 thousandths of an inch from the top to bottom measurement to make it fit in my mil-spec SA 1911 A1, the trigger looks great and performs flawlessly!

Incredible product (25.04.2012)

Great fit on my Springfield GI government model. No fitting required, no play at all.

Required fitting but it's good (03.08.2012)

This trigger required about one hour work for fitting in my Norinco but works well and looks great.

Perfect (23.09.2012)

Couldnt have asked for a better product. No fitting required, just polished the rear with some 600 and stoned a few edges. smooth as silk! Over travel adjusts easy but stays put!

Almost Drop In Rock Island FS Tac II 9mm (06.02.2014)

Les 8 flere anmeldelser fra brownells.com