Drop-in replacement for factory magazine catch has a unique, convex button surface to ensure positive finger contact for fast magazine changes under pressure. Crisp, 30 lpi serrations further aid in fumble-free engagement; .045" longer than factory part for extra leverage without creating an unwanted protrusion that snags on clothing, holster, or other gear. Tumbled and bead-blasted for a uniform, matte finish with rounded “dehorned” edges. Interior of the catch is relieved to enable instant magazine free-fall when you hit the button. Available in Carbon Steel with black manganese phosphate finish.
Rask, positiv utgivelse uten ekstra bulk
Drop-in erstatning for fabrikk magasinfangst har en unik, konveks knappoverflate for å sikre positiv fingerkontakt for raske magasinbytter under press. Skarpe, 30 lpi riller bidrar ytterligere til problemfri engasjement; .045" lengre enn fabrikkdelen for ekstra moment uten å skape en uønsket utstikk som hekter seg fast i klær, hylster eller annet utstyr. Tumble- og bead-blasted for en jevn, matt finish med avrundede "dehorned" kanter. Innvendig av fangsten er lettet for å muliggjøre umiddelbar magasinfritt fall når du trykker på knappen. Tilgjengelig i karbonstål med svart manganfosfat finish.
Top takeaways
Drop-in erstatning med konveks knappeflate og 30 lpi riller for raske og sikre magasinbytter.
.045" lengre enn fabrikkdelen for ekstra hevarm uten uønsket utstikker; tromlet og bead-blastet for ensartet, matt finish.
Tilgjengelig i karbonstål med sort manganfosfatfinish; muliggjør øyeblikkelig magasinfri-fall ved knappetrykk.
Attributes
Finish:Black Manganese Phosphate
Hand:Right
Modell:Commander,Government,Officers
Våpentype:1911
Leveringsvekt:0,091kg
Frakthøyde:8mm
Fraktbredde:79mm
Fraktlengde:127mm
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.x
Kundeanmeldelser
Kundevurderinger (10)
3,6 / 5
Anbefalt
It needs fitting 16.01.2017
I bought one of these to complete a parts build on an RIA. I needed to be fitted around both the button and the mag lock areas. Additionally the interior lock needed to be relieved as well to make dropping magazines easier. The bevel feels very nice and the extended length feels right in my hands and I can drop magazines without breaking my grip (I wear XL gloves and have a set of VZ grips with the super scoop). Overall it's a button gentlemen, it works but it'll require fitting in most dimensions.
Litt anbefalt
Can't use 21.07.2015
It's machined well, but was tearing up Wilson Combat mags. I rounded the edge as much as possible, but it seems like the mags are galling terribly with each insertion.
Good looking mag catch, fit perfectly but still ended up in the trash.
Anbefalt
Almost 5 stars 08.01.2012
Mine was slightly over molded and required some filing in order to release the magazine cleanly. Also, it does NOT include the retaining pin and spring.
Klart anbefalt
Great design, well executed 06.11.2011
This is a great design concept. 1911 owners need to remember that there is no such thing as a guaranteed drop in part in the world of the 1911. Sometimes you get lucky and other times you have to have a competent gunsmith or armored fit it. There are simply too many manufacturers and variables to account for. That said, this part was easy for me to fit up and works great in my builds.
Klart anbefalt
Hands down, a good quality part. 01.04.2011
I don't understand the bad reviews on this particular item. The machine quality is very good. As for the part fitting loose in the frame, I put this release into a Kimber frame with a near perfect fit, so based on the brand of your pistol, your mileage may vary. You will have to fit this part. REMEMBER: This is not a must, but I strongly advise to polish the mag catch lock as well, this will prevent it from dragging in the catch itself, making your release much more smooth. Overall I am very satisfied with this product. 10-8 makes good quality parts.
Ikke anbefalt
not good 22.06.2010
way to small and loose fitting in my Springfield operator. also noticed it had a jagged protruding edge machined on the inside. i like the curved button, and the finish is good, but the machine quality and fit is extremely poor.
Anbefalt
10-8 magazine catch 27.03.2010
This does provide a very positive and quick release of the magazine. It is a strong machined part. The slanted contour and serrations provide a very positive tactile surface. Fitting was required to get flush with the frame and to allow proper travel. If you have to file you will need to touch up the blueing. Overall, I like it better than your standard, checkered and extended catch.
Anbefalt
10-8 magazine catch 27.03.2010
This part does release the magazine very quickly with minimal presure. The slanted serrated surface provides a very positive tactile surface. I do like it better than similar, extended and checkered magazine releases.
Klart anbefalt
High Quality, Nicely Finished 30.12.2009
A well thought out design with clean serrations, without annoying casting lines typical in other brands. Slightly oversized which allows precise fitting regardless of tolerance stacks.
Litt anbefalt
Expected more out of this part..... 14.10.2009
I love beveled mag releases. Usually I buy a mag release and then have to have it custom beveled and serrated by a gunsmith. So, naturally I was excited when 10-8 started offering these. That's about where the excitement ends. The fit and finish of these parts is really disappointing.
Vi opplevde en feil under innlasting av dette innholdet. Vennligst last inn siden på nytt for å fortsette. Hvis problemet vedvarer, ta kontakt med kundeservice.
Oppgrader din 1911 med en forlenget magasinutløser fra 10-8 PERFORMANCE. ✨ Raskere magasinbytter og perfekt passform!
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Lavprofilerte “Bullet Proof” komponenter for komfortabel skjult bæring og rask presentasjon uten snag.
Ekstra bred, rustfritt stål beavertail Grepssikring gir utmerket beskyttelse mot hammerbit og forbedret kontroll.
Skeletonisert, Commander-stil hammer med lav piggprofil for hel-dags skjult bæring, krever børsemaker for installasjon.
Settene inkluderer populære Wilson Combat 47D 1911 magasiner, ideelle for skytebanen, skjult bæring eller tjeneste.
Tilgjengelig med eller uten Michaels of Oregon-pose for å bære to magasiner på beltet, med et ekstra i 1911.
Dobbelt magasinpose har individuelt formede rom og spenningskruer for riktig justering.
Utvidet tommelsikring presisjonsmaskinert fra solid stålbar med fire-akset CNC-skjærestasjon for styrke og holdbarhet.
Ergonomisk formet, overdimensjonert pute gir naturlig, behagelig kontakt og maksimal utnyttelse for rask og sikker aktivering/deaktivering.
Skråstilte eller avrundede kanter forhindrer slitasje på fingeren eller hekting på klær under trekk fra skjul.
Hjelp og kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning