Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

WILSON COMBAT
1911 BARREL BUSHING

874218000714 965000049

Blued Or Stainless, Target Grade

Installs in most 1911 Autos with little to no fitting. O.D.’s fit nicely in most slides. Blued & stainless version may need fitting.

SPECS: #29B Blued - .825" (20.9mm) long, .575" (14.6mm) I.D., .703" (17.9mm) O.D. #29S Stainless - .825" (20.9mm) long. .578" I.D., .702" (17.8mm) O.D. #29CO Officer's Model Stainless - .700" (17.79mm) I.D., .766" (19.47mm) O.D.

Mer...

Bluet eller rustfritt stål, Target Grade

Installeres i de fleste 1911 Auto med lite til ingen tilpasning. Ytre diameter passer fint i de fleste slider. Bluet og rustfritt stål versjonen kan trenge tilpasning.

SPECS: #29B Bluet - 20,9 mm lang, 14,6 mm I.D., 17,9 mm O.D. #29S Rustfritt stål - 20,9 mm lang, 14,6 mm I.D., 17,8 mm O.D. #29CO Officersmodell rustfritt stål - 17,79 mm I.D., 19,47 mm O.D.

Mer...

Kundevurderinger for WILSON COMBAT WILSON #29CO OFFICER'S MODEL BUSHING

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,8

Lots of extra metal for a tight fitting (09.04.2011)

I had to do a couple hours of hand polishing just to get it to fit into the slide on my wife Colt Officers model 1911. After that came about 30 minutes of needle filing, trying to shape the locking lug so that it would turn in engage and stop lined up exactly with the plunger hole. I'm going to be installing a Wilson Combat full length guide rod and reverse plug kit so there is no need for the bushing to over travel like the factory. I stopped filing the locking lug before I reached the over travel position.

very useful product (11.06.2010)

i have a small custom shop,have used several of these, improves acurracy greatly,

Fitting required (14.07.2010)

I had some fitting to do , but my gun is also a Norinco with poor spec. ID and OD had to be trim and polished. Nice look and tight fit, don't forget to get a barrel wrench.

Good quality (13.03.2017)

I replaced old collet bushing in my Series 70 Colt Government with this SS Wilson Combat Bushing. The bushing to slide fit was perfect. The I.D. measured .579 and my barrel measured .580 so I hand sanded the I.D. of the bushing to .581. A day at the range showed tighter groups then I've had since I bought the pistol in early 80.s. I went from 6" groups to less then 2" at 20 yds. I suggest hand sanding over using power tools for fitting to get the best fit. Great, easy to install product. Make sure you have a bushing wrench.

1911a1 Barrel Bushing (06.01.2011)

I will say that Wilson Combat has great quality products. But, when it comes to the barrel bushing for a Springfield 1911A1 Mil-Spec to drop in, forget it. It will require some work from a gunsmith. I am a hobby gunsmith but, this is a bit advanced for me to even try to make it work when I don't have the correct tool for the job.

great product (02.11.2012)

took a bit of fitting, but now my old norinco has a bushing that requires a wrench. the barrel is also quite a bit tighter in the bushing. I cant wait to test it out as I've had great luck with there other products and cant wait to see my groups shrink.

Didn't fit my R1 (01.03.2018)

I'm sure it works fine, Wilson Combat doesn't make junk. However it did not fit my Remington R1. I was annoyed that my all blued 1911 had a stainless bushing so I ordered this one. My guess is that the Remington is out of spec rather than the other way around. I could try and have it fitted but that might take the finish off which would defeat the purpose. I'm not going to return it because it's not Brownells fault it didn't fit.

Wilson Combat 1911 Barrel Bushing (29B) (14.04.2018)

Installed this bushing on my Springfield 1911-A1. Very tight fit but finally able to get the slid to cycle freely after cycling it a few dozen times. May remove the bushing and polish the bushing ID with some 1000 grit sand paper on a wood dowel rod.

I think a snug fit bushing could help increase accuracy.

Les 8 flere anmeldelser fra brownells.com

499 549 3 NOK

Produktnr.: 965000049
WILSON COMBAT WILSON #29CO OFFICER'S MODEL BUSHING
Produsentnr.: 29CO 874218000714 Installeres i de fleste 1911 Auto med lite til ingen tilpasning. Ytre diameter passer fint i de fleste slider. Bluet og rustfritt stål versjonen kan trenge tilpasning.

549 NOK 2 kr 549,00 *

Leveringstid ca. 14-21 dager.
2 stk. på lageret i USA

Spesifikasjoner: Finish: Stainless Steel Make: 1911 Modell: Officers Style: Drop-In

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Finish: Stainless Steel Make: 1911 Modell: Officers Style: Drop-In Leveringsvekt: 0,009kg Frakthøyde: 1mm Fraktbredde: 83mm Fraktlengde: 146mm UPC : 874218000714

Elementdetaljer

Made in USA

Produktnr.: 965029001
WILSON COMBAT WILSON #29B BUSHING
Produsentnr.: 29B 874218000707 Installeres i de fleste 1911 Auto med lite til ingen tilpasning. Ytre diameter passer fint i de fleste slider. Bluet og rustfritt stål versjonen kan trenge tilpasning.

549 NOK 1 kr 549,00 *

Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA

Spesifikasjoner: Finish: Blued Make: 1911 Modell: Government Style: Drop-In

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Finish: Blued Make: 1911 Modell: Government Style: Drop-In Leveringsvekt: 0,014kg Fraktbredde: 83mm Fraktlengde: 146mm UPC : 874218000707

Elementdetaljer

Made in USA

Produktnr.: 965029002
WILSON COMBAT WILSON #29S BUSHING
Produsentnr.: 29S 874218000738 Installeres i de fleste 1911 Auto med lite til ingen tilpasning. Ytre diameter passer fint i de fleste slider. Bluet og rustfritt stål versjonen kan trenge tilpasning.

499 NOK 7 kr 499,00 *

Leveringstid ca. 14-21 dager.
7 stk. på lageret i USA

Spesifikasjoner: Finish: Stainless Steel Make: 1911 Modell: Government Style: Drop-In

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Finish: Stainless Steel Make: 1911 Modell: Government Style: Drop-In Leveringsvekt: 0,005kg Frakthøyde: 10mm Fraktbredde: 74mm Fraktlengde: 124mm UPC : 874218000738

Elementdetaljer

Made in USA

Oppgrader din 1911 med Wilson Combat #29CO Officersmodell bushing. Enkel installasjon, perfekt passform! 🔧

Blued Or Stainless, Target Grade

Installs in most 1911 Autos with little to no fitting. O.D.’s fit nicely in most slides. Blued & stainless version may need fitting.

Mer...

Bluet eller rustfritt stål, Target Grade

Installeres i de fleste 1911 Auto med lite til ingen tilpasning. Ytre diameter passer fint i de fleste slider. Bluet og rustfritt stål versjonen kan trenge tilpasning.

Mer...

Kundevurderinger for WILSON COMBAT WILSON #29CO OFFICER'S MODEL BUSHING

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,8

Lots of extra metal for a tight fitting (09.04.2011)

very useful product (11.06.2010)

i have a small custom shop,have used several of these, improves acurracy greatly,

Fitting required (14.07.2010)

I had some fitting to do , but my gun is also a Norinco with poor spec. ID and OD had to be trim and polished. Nice look and tight fit, don't forget to get a barrel wrench.

Good quality (13.03.2017)