No-fail extractor operates with long-lasting coil springs for increased service life; provides enhanced, reliable performance for self-defense and competitor shooters. Machined from super strong, alloy steel; specially hardened and heat treated to last indefinitly. Installs easily in Series 70 1911 Autos without slide modifications.
SPECS: Steel, in-the-white, heat treated. Includes two sets of springs, complete instructions. NOTE on 9mm: If your slide has a true, 9mm breech face (like the SVI interchangable, some Caspians and Nowlins, order extractor #466-001-038. If your 9mm is built on a .38 Super Slide (most are) order extractor #466-001-009.
Mer...
Doble Spiralfjærer Avslutter Ekstraktorfeil
Ekstraktor som ikke svikter, opererer med langvarige spiralfjærer for økt levetid; gir forbedret, pålitelig ytelse for selvforsvar og konkurranse skyttere. Maskinert fra supersterk, legeringsstål; spesielt herdet og varmebehandlet for å vare i det uendelige. Installerer enkelt i Series 70 1911 Autos uten modifikasjoner av sleiden.
SPESIFIKASJONER: Stål, umalt, varmebehandlet. Inkluderer to sett med fjærer, komplette instruksjoner. MERK for 9mm: Hvis sleiden din har en ekte, 9mm patronflate (som SVI utskiftbar, noen Caspian og Nowlin, bestill ekstraktor #466-001-038. Hvis din 9mm er bygget på en .38 Super Slide (de fleste er) bestill ekstraktor #466-001-009.
Mer...
Kundevurderinger for MILLENIUM CUSTOM II FITS 9X19, 9X21, 9X23X 38 SUPER COMP.
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,4
Final Answer in Extractors!(24.08.2009)
This will end your extractor problems in your 1911. I had a Kimber and I could not get the extractor tuned correctly. I spent the extra and got the Millenium over the traditional designs. It installed easily with only minor fitting. Make sure it floats very freely on the firing pin stop. It cured all extractions problems.
Best Extractor Period(15.06.2012)
There isn't a thing to complain about this extractor other than losing the springs when you clean your gun. A little fitting at the firing pin stop and a little shaping (if at all) is all you need to get this extractor running great. The extra cost is actually cheaper in the long run when just having to change the springs and cap compared to changing the entire extractor, fitting, and tuning. I have put well over 5000 rounds on this extractor with no problems at all, and change out the springs and cap just for a yearly tune up. Springs come out still with good spring pressure and the cap isn't beat up at all
Very Disappointed(27.05.2013)
I read good things about this extractor and gave it a try. Unfortunately, I cannot get it to function properly. The instructions talk about fitting a firing pin stop to allow the extractor's slot to pivot around the firing pin stop. After much filing, I've been unable to fit the firing pin stop enough to allow the extractor to exert enough tension on a casing.
Perhaps this company needs to provide its own firing pin stop in the kit.
It'll sit in my spare parts box until I give it away along with a scrapped $20 firing pin stop.
Absolutely the best(14.11.2013)
This is the most reliable extractor that ever was. I wish I had invented it since I am now about to buy my 5th one in about 15 years! No they didn't wear out I'm just putting one on my newest competetion toy. I have NEVER had a failed extraction in 15,000 to 20,000 rounds. I have tried ALL of the others. Watch out for all of the catch phrases like " tough, bullet proof, hard core etc. they talk the talk". Take the time to fit it to the firing pin stop since there are many different sizes. Thickness etc.
Worth Every Penny.(15.03.2014)
My STI Ranger II had failure to extract causing a double feed 5/10 times with reloaded ammunition and about once or twice per mag with factory ammunition. I ordered one of these guys and dropped it in. It fix all of my FTE. I have since ran about 500 rounds through her and i have ZERO issues. For 9mm it's a bit tougher to install an extractor. This product DOES REQUIRE FITTING. you might have to make modifications to your firing pin stop. Mine also sticks out a bit at the back that i will have to file or stone to make it fit flush. I can live with it sticking out a bit so long as my gun guns 100%. This product also requires a breaking in period. It comes with 2 springs and of which i only installed one until the spring softened a little. It is a lot beefier then the stock extractor.
gun fixed(28.06.2015)
Wife favorite gun love to shoot it, 1911 38 super, has has extraction problems right out of the box. Many tunings, no progress Then I bought a high dollar extractor and had the areas "best gunsmith" install and tune it. 70 rounds OK and then problems again with jams and stovepipes again.
Bought one of these extractors installed it myself and she just put "problem free" round number 500 through it today. Problem solved and we are both very pleased with the product.
Worked on a 22 TCM(08.09.2015)
So the Rock Island 22 TCM can be a problematic cartridge. I was starting to have a myriad of FTE's. I read about this and as a last resort thought I'd try it. The 22 TCM is not based on the 9mm but on the 5.56 case head size. So it's a bit smaller. The extractor didn't hold the TCM case as tightly as a 9mm. It didn't matter. It still worked and worked well. For the first time I ran a box of ammo though the pistol with no malfunctions.
It's a bit fiddley to install, more so that a regular extractor but after playing with it a bit I managed to it in...I'm very happy with it. $89.00 is stiff but it does work.
Produktnr.: 466001009 MILLENIUM CUSTOM II FITS 9X19, 9X21, 9X23X 38 SUPER COMP. Produsentnr.: ACE01 Ekstraktor som ikke svikter, opererer med langvarige spiralfjærer for økt levetid; gir forbedret, pålitelig ytelse for selvforsvar og konkurranse skyttere. Maskinert fra supersterk, legeringsstål; spesielt herdet og varmebehandlet for å vare i det uendelige. Installerer enkelt i Series 70 1911 Autos uten modifikasjoner av sleiden.
Ekstraktor laget av supersterkt legeringsstål, herdet og varmebehandlet for langvarig holdbarhet.
Passer enkelt i Series 70 1911 Autos uten behov for modifikasjoner av sleiden.
Inkluderer to sett med fjærer og komplette instruksjoner, optimal for både selvforsvar og konkurranseskyting.
Attributes
Finish:
Black
Kaliber:
38 Super (.355-.356)
Make:
1911
Modell:
Commander,Government,Officers
Leveringsvekt: 0,018kgFrakthøyde: 8mmFraktbredde: 102mmFraktlengde: 128mm
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Opplev pålitelig ytelse med 1911 Advanced Competition Extractor! 💪 Perfekt for selvforsvar og konkurranse skyttere. Enkel installasjon.
No-fail extractor operates with long-lasting coil springs for increased service life; provides enhanced, reliable performance for self-defense and competitor shooters. Machined from super strong, alloy steel; specially hardened and heat treated to last indefinitly. Installs easily in Series 70 1911 Autos without slide modifications.
SPECS: Steel, in-the-white, heat treated. Includes two sets of springs, complete instructions. NOTE on 9mm: If your slide has a true, 9mm breech face (like the SVI interchangable, some Caspians and Nowlins, order extractor #466-001-038. If your 9mm is built on a .38 Super Slide (most are) order extractor #466-001-009.
Mer...
Doble Spiralfjærer Avslutter Ekstraktorfeil
Ekstraktor som ikke svikter, opererer med langvarige spiralfjærer for økt levetid; gir forbedret, pålitelig ytelse for selvforsvar og konkurranse skyttere. Maskinert fra supersterk, legeringsstål; spesielt herdet og varmebehandlet for å vare i det uendelige. Installerer enkelt i Series 70 1911 Autos uten modifikasjoner av sleiden.
SPESIFIKASJONER: Stål, umalt, varmebehandlet. Inkluderer to sett med fjærer, komplette instruksjoner. MERK for 9mm: Hvis sleiden din har en ekte, 9mm patronflate (som SVI utskiftbar, noen Caspian og Nowlin, bestill ekstraktor #466-001-038. Hvis din 9mm er bygget på en .38 Super Slide (de fleste er) bestill ekstraktor #466-001-009.
Mer...
Kundevurderinger for MILLENIUM CUSTOM II FITS 9X19, 9X21, 9X23X 38 SUPER COMP.
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,4
Final Answer in Extractors!(24.08.2009)
This will end your extractor problems in your 1911. I had a Kimber and I could not get the extractor tuned correctly. I spent the extra and got the Millenium over the traditional designs. It installed easily with only minor fitting. Make sure it floats very freely on the firing pin stop. It cured all extractions problems.
Best Extractor Period(15.06.2012)
There isn't a thing to complain about this extractor other than losing the springs when you clean your gun. A little fitting at the firing pin stop and a little shaping (if at all) is all you need to get this extractor running great. The extra cost is actually cheaper in the long run when just having to change the springs and cap compared to changing the entire extractor, fitting, and tuning. I have put well over 5000 rounds on this extractor with no problems at all, and change out the springs and cap just for a yearly tune up. Springs come out still with good spring pressure and the cap isn't beat up at all
Very Disappointed(27.05.2013)
I read good things about this extractor and gave it a try. Unfortunately, I cannot get it to function properly. The instructions talk about fitting a firing pin stop to allow the extractor's slot to pivot around the firing pin stop. After much filing, I've been unable to fit the firing pin stop enough to allow the extractor to exert enough tension on a casing.
Perhaps this company needs to provide its own firing pin stop in the kit.
It'll sit in my spare parts box until I give it away along with a scrapped $20 firing pin stop.
Absolutely the best(14.11.2013)
This is the most reliable extractor that ever was. I wish I had invented it since I am now about to buy my 5th one in about 15 years! No they didn't wear out I'm just putting one on my newest competetion toy. I have NEVER had a failed extraction in 15,000 to 20,000 rounds. I have tried ALL of the others. Watch out for all of the catch phrases like " tough, bullet proof, hard core etc. they talk the talk". Take the time to fit it to the firing pin stop since there are many different sizes. Thickness etc.
Worth Every Penny.(15.03.2014)
My STI Ranger II had failure to extract causing a double feed 5/10 times with reloaded ammunition and about once or twice per mag with factory ammunition. I ordered one of these guys and dropped it in. It fix all of my FTE. I have since ran about 500 rounds through her and i have ZERO issues. For 9mm it's a bit tougher to install an extractor. This product DOES REQUIRE FITTING. you might have to make modifications to your firing pin stop. Mine also sticks out a bit at the back that i will have to file or stone to make it fit flush. I can live with it sticking out a bit so long as my gun guns 100%. This product also requires a breaking in period. It comes with 2 springs and of which i only installed one until the spring softened a little. It is a lot beefier then the stock extractor.
gun fixed(28.06.2015)
Wife favorite gun love to shoot it, 1911 38 super, has has extraction problems right out of the box. Many tunings, no progress Then I bought a high dollar extractor and had the areas "best gunsmith" install and tune it. 70 rounds OK and then problems again with jams and stovepipes again.
Bought one of these extractors installed it myself and she just put "problem free" round number 500 through it today. Problem solved and we are both very pleased with the product.
Worked on a 22 TCM(08.09.2015)
So the Rock Island 22 TCM can be a problematic cartridge. I was starting to have a myriad of FTE's. I read about this and as a last resort thought I'd try it. The 22 TCM is not based on the 9mm but on the 5.56 case head size. So it's a bit smaller. The extractor didn't hold the TCM case as tightly as a 9mm. It didn't matter. It still worked and worked well. For the first time I ran a box of ammo though the pistol with no malfunctions.
It's a bit fiddley to install, more so that a regular extractor but after playing with it a bit I managed to it in...I'm very happy with it. $89.00 is stiff but it does work.
Hjelp og kontakt
(0) 
Nyhetsbrev
Klassisk visning
Mobilvisning