Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

REDMANS
.17 CALIBER RIMFIRE BARREL LINERS

770000002
Easily & Professionally Reline Rimfire Rifle Barrels In Your Shop; Made By One Of The Most Respected Names In The Liner Industry
There are untold thousands of rimfire’s all over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Redman 17 Caliber Rimfire Barrel Liners are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS® for the permanent bond between barrel and liner. Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. WARNING: These Redman gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury.  

SPECS: 4140 steel. .172" (4.36mm) groove dia. 5/16" (7.9mm) O.D., 26-3/8" (67cm) overall, 25" (63.5cm) usable length. Not chambered.

1099 1099 1 NOK
Produktnr.: 770000002
REDMANS BROWNELLS/REDMAN 1-9 TWIST LINER, .17 MACH 2 Det finnes utallige randtenningsvåpen over hele landet i dag som kun trenger en løpsforing for å gjenopprette deres opprinnelige skyteevner. Noen av disse våpnene er vakre samlingsstykker, andre er fine jaktvåpen og noen av dem er rett og slett "elsket" av eierne som ønsker dem tilbake til sin opprinnelige tilstand. Redman .17 kaliber randtenning løpsforinger er knapp-riflet med en ultra glatt, jevn overflate og skarp, distinkt rifling for enestående nøyaktighet som er bedre enn - eller lik - et originalt, nytt løp. Instruksjonsheftet gir komplette, lett-forståelige detaljer for enten den gamle, klassiske metoden for å lodde foringene på plass, eller den mer moderne metoden for å bruke ACRAGLAS® for en permanent binding mellom løp og foring. Løpsforingsinstruksjonsboken detaljerer systemene brukt av børsemakere Bob Schuetz, Willis Sprunger og Ralph Walker. Walker brukte en variabel hastighet håndboremaskin og ACRAGLAS for å holde foringen på plass. Schuetz lodder foringen på plass. Sprunger forlenget et vanlig bor, boret hullet på en dreiebenk og festet med ACRAGLAS. ADVARSEL: Disse Redman løpsforingene er laget for spesifikke patroner. Bruk kun med spesifiserte patroner oppført i produktbeskrivelsen. Å kamre disse løpsforingene i andre kalibre er farlig og kan forårsake alvorlig personskade.
1099 NOK 0 kr 1 099,00 *
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Spesifikasjoner: Kaliber: 17 Mach 2

Top takeaways

  1. Redman .17 kaliber randtenning løpsforinger gir enestående nøyaktighet med en ultra glatt, jevn overflate og skarp rifling.
  2. Instruksjonsheftet inkluderer detaljer for både klassisk loddemetode og moderne ACRAGLAS® metode for permanent binding.
  3. Spesifikasjoner: Laget av 4140 stål, .172" sporvidde, 5/16" ytre diameter, 26-3/8" total lengde, 25" brukbar lengde, ikke kamret.

Attributes

Cartridge: 17 Mach 2 Leveringsvekt: 0,188kg Frakthøyde: 8mm Fraktbredde: 51mm Fraktlengde: 699mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.c



Gjenopprett presisjonen med Redman .17 kaliber løpsforinger ✨. Ideell for jakt og samling, med enestående nøyaktighet og enkel installasjon.

Easily & Professionally Reline Rimfire Rifle Barrels In Your Shop; Made By One Of The Most Respected Names In The Liner Industry
There are untold thousands of rimfire’s all over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Redman 17 Caliber Rimfire Barrel Liners are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS® for the permanent bond between barrel and liner. Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. WARNING: These Redman gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury.  

SPECS: 4140 steel. .172" (4.36mm) groove dia. 5/16" (7.9mm) O.D., 26-3/8" (67cm) overall, 25" (63.5cm) usable length. Not chambered.

4,8
På lager
kr 3 049,00
Tilbake til toppen