Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 2500

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

BORE TECH
C4 CARBON REMOVER

667739980067 509350160

Sophisticated Solvents That Take The Chore Out Of Bore Cleaning

Technologically advanced, 100% biodegradable formula is environmentally safe, yet strong enough to remove the toughest carbon, lead, and moly fouling in just seconds. Ideal for rifle barrels, bolt faces, flash suppressors, compensators, silencers, chamber throats, revolver cylinders, gas pistons and any other place extreme carbon fouling is found. Will also neutralize and remove corrosive salts found in surplus military ammunition and black powder. Deep cleaning action easily penetrates the smallest crevices and other hard-to-reach areas, leaving heavily fouled parts looking factory new. For really stubborn fouling just soak in C4 Carbon Remover for a few minutes, then wipe or patch dry. Conditions the metal to help prevent future build-up. Non-flammable, ordorless, ammonia free solution is safe for indoor use.

SPECS: 4 fl. oz. (118 ml) squeeze bottle or 16 fl. oz. (473 ml) plastic bottle.

Mer...

Sofistikerte løsemidler som gjør rengjøring av løpet til en enkel oppgave

Avansert teknologisk, 100% biologisk nedbrytbar formel er miljøvennlig, men samtidig kraftig nok til å fjerne selv det tøffeste karbon-, bly- og molybdenforurensning på bare sekunder. Ideell for rifleløp, sluttstykker, flammedempere, kompensatorer, lyddempere, kammerhalser, revolvertromler, gassstempel og andre steder hvor ekstrem karbonforurensning finnes. Vil også nøytralisere og fjerne korrosive salter funnet i overskuddsmilitær ammunisjon og svartkrutt. Den dype rengjøringsvirkningen trenger lett inn i de minste sprekker og andre vanskelig tilgjengelige områder, og etterlater sterkt forurensete deler som ser fabrikknye ut. For virkelig sta forurensning, bare la delene ligge i bløt i C4 Carbon Remover i noen minutter, så tørk av eller bruk en rensefille. Behandler metallet for å hjelpe med å forhindre fremtidig oppbygging. Ikke-brennbar, luktfri, ammoniakkfri løsning er trygg for innendørs bruk.

SPECS: 4 fl. oz. (118 ml) klemmeflaske eller 16 fl. oz. (473 ml) plastflaske.

Mer...

Kundevurderinger for BORE TECH 16 OZ. C4 CARBON REMOVER

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 5

Works Great! (16.03.2011)

I use this on all of my guns (pistols and rifles). It breaks up carbon like nothing I've used before! It really does a nice job on the Bolt/Carrier Group in my AR-15. I just soak it with C4 and let it sit for a bit. The carbon just wipes off.

The wife doesn't even complain when I'm cleaning at the kitchen table becuase there is no odor.

Best I've found for carbon removal. (22.04.2015)

C4 is the best product for cutting carbon that I have found. I used C4 to clean a 7.62x39 AR after firing 500+ rounds of cheap imported steel case ammo. The rifle was still completely functional but you can imagine what the bolt and carrier looked like. Nothing is going to cut through all that baked on mess so I first used an OTIS B.O.N.E. Bolt Carrier & Pin Cleaning Tool to remove the bulk carbon. Then I used C4 with steel wool and a wire brush to get the rest of the mess. Soaking the parts may have worked too, but I only had one small bottle. C4 worked better than the other gun/bore cleaning products I had on hand.

It smells a little like oranges and doesn't bother my hands.

C4 Carbon remover is amazing (21.03.2017)

Recently purchased this C4 carbon remover to clean a S&W .460 revolver. With loads for it running in the 60,000cup pressure range the carbon is pretty well "baked on" surfaces. It is absolutely amazing, works exactly as advertised and removes carbon build up from revolver cylinders, cylinder face, between barrel & top strap as well as other hard to clean areas with minimal "scrubbing". As directions state, "leave hard to clean areas soak for a few minutes" and you will have no problems. Retired law enforcement and competitive shooter that has used a variety of products over many years, I would highly recommend this product.

Outstanding Carbon remover (26.02.2018)

Every revolver shooter will love this product. I bought it for the sole purpose to remove the very stubborn carbon fouling on the end of the revolver cylinder and top strap. After removing the cylinder I cut a small hole in a large patch and placed it over the ejection rod so the patch covered the front face. With the cylinder sitting upright I soaked the patch with the product and let it sit overnight. The next morning I was able to wipe the carbon off with a Q-tip !!! No scrubbing needed that might damage the cylinder exit ports. I found it works best if you let the chemical soak into the carbon. Don't expect magical results in a few seconds.

The second area was the carbon build-up inside the cylinder. I wadded a patch into each of the six cavities and again soaked the patches and let set. A couple of strokes with a bore brush and patches and it was clean.

Best carbon remover (06.07.2015)

The best cleaning solution that I have found to clean a suppressor. Left my ACC Tirant45S parts in the solution for several days and used a toothbrush to brush off the carbon, no chipping or scraping the parts.

The best for old carbon build up (15.01.2016)

Had very heavy, 3-years-old, carbon build up in a piston-system AR-style rifle (from ~1000 rounds during a 2-day class) and a pump shotgun (from ~250 rounds during the same class). I left the worst parts soaking, completely submerged, for 1 week in another product that is currently touted as the super duper carbon removing product on the market. That vegetable based so called CLP did not even soften the carbon one bit. Nothing. Zero.

I then decided to try Bore Tech C4. After soaking overnight the results were impressive to say the least. Thin carbon fouling wiped right off. Thicker deposits took some work with a soft brush, but everything eventually came off. Great product.

Like Magic! (08.08.2017)

Of all of the carbon solvents I have tried (and I have tried many, both old school and new school) this is simply the best of the best. It has a slight orange-ish scent to it and doesn't irritate your skin like a lot of old school cleaners like Hoppe's. For someone like me who wears contact lenses, this is really important as solvents like Hoppe's contain kerosene and petroleum distillates which don't wash off the hands nicely, even with alcohol-based hand sanitizer. What this means is that I can ruin a pair of contacts by using said solvent. With this stuff no worries, it washes off with hand soap and is like the Dawn of guns, it cleans what no other solvent will and without being harmful to the user.

Les 7 flere anmeldelser fra brownells.com

399 399 2 NOK

Produktnr.: 509350160
BORE TECH 16 OZ. C4 CARBON REMOVER
Produsentnr.: BTCC-35016 667739980067 Avansert teknologisk, 100% biologisk nedbrytbar formel er miljøvennlig, men samtidig kraftig nok til å fjerne selv det tøffeste karbon-, bly- og molybdenforurensning på bare sekunder. Ideell for rifleløp, sluttstykker, flammedempere, kompensatorer, lyddempere, kammerhalser, revolvertromler, gassstempel og andre steder hvor ekstrem karbonforurensning finnes. Vil også nøytralisere og fjerne korrosive salter funnet i overskuddsmilitær ammunisjon og svartkrutt. Den dype rengjøringsvirkningen trenger lett inn i de minste sprekker og andre vanskelig tilgjengelige områder, og etterlater sterkt forurensete deler som ser fabrikknye ut. For virkelig sta forurensning, bare la delene ligge i bløt i C4 Carbon Remover i noen minutter, så tørk av eller bruk en rensefille. Behandler metallet for å hjelpe med å forhindre fremtidig oppbygging. Ikke-brennbar, luktfri, ammoniakkfri løsning er trygg for innendørs bruk.

Ikke tilgjengelig.

Spesifikasjoner: Størrelse: 16 oz

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

100% biologisk nedbrytbar formel som er miljøvennlig og kraftig nok til å fjerne tøff karbon-, bly- og molybdenforurensning.
Ideell for rengjøring av rifleløp, sluttstykker, flammedempere, kompensatorer, lyddempere, og andre områder med ekstrem karbonforurensning.
Ikke-brennbar, luktfri og ammoniakkfri løsning som er trygg for innendørs bruk.

Attributes

Size: 16 oz Leveringsvekt: 0,59kg Frakthøyde: 762mm Fraktbredde: 84mm Fraktlengde: 86mm UPC : 667739980067

Elementdetaljer

Made in USA

Produktnr.: 509350040
BORE TECH 4 OZ. C4 CARBON REMOVER
Produsentnr.: BTCC-35004 667739980050 Avansert teknologisk, 100% biologisk nedbrytbar formel er miljøvennlig, men samtidig kraftig nok til å fjerne selv det tøffeste karbon-, bly- og molybdenforurensning på bare sekunder. Ideell for rifleløp, sluttstykker, flammedempere, kompensatorer, lyddempere, kammerhalser, revolvertromler, gassstempel og andre steder hvor ekstrem karbonforurensning finnes. Vil også nøytralisere og fjerne korrosive salter funnet i overskuddsmilitær ammunisjon og svartkrutt. Den dype rengjøringsvirkningen trenger lett inn i de minste sprekker og andre vanskelig tilgjengelige områder, og etterlater sterkt forurensete deler som ser fabrikknye ut. For virkelig sta forurensning, bare la delene ligge i bløt i C4 Carbon Remover i noen minutter, så tørk av eller bruk en rensefille. Behandler metallet for å hjelpe med å forhindre fremtidig oppbygging. Ikke-brennbar, luktfri, ammoniakkfri løsning er trygg for innendørs bruk.

399 NOK 364 kr 399,00 *